All Courses

Daffodil Polytechnic Institute × Jayed Bin Murshed ×
Mathematics-3(25931)
 To enable to calculate the areas of regular polygons, hexagons, octagon, hydraulic mean depth (HMD) of a
channel, area occupied by water of circular culvert. Excavation work.
 To provide the ability to calculate volume of regular solids like pyramid frustum of pyramid, prismoid,
wedge and area of curved surfaces.
 To enable to use the knowledge of gradient of a straight line in finding speed, acceleration etc.
 To enable to use the knowledge of conic in finding the girder of a railway bridge, cable of a suspension
bridge and maximum height of an arch.

 SHORT DESCRIPTION
Menstruation: Area of rectangles, squares, triangles, quadrilaterals, parallelograms, rhombus, trapezium, circle,
sector, segment; Volume of rectangular solids, prism, parallelepiped, pyramids, cones, spheres, frustum of pyramid
and cone; Area of curved surface of the prism, Cylinder cone, pyramid and frustum of cone.
Co-ordinate Geometry: Co-ordinates of a point, locus and its equation, straight lines, circles and conic.
Calculus: Differential equation, Laplace transformation
Physics-1 (25912)
To provide a foundation in scientific principals and processes for the understanding and application of technology. It will help our students to make a common base for further studies in technology and science. It also help to develop the basic knowledge of modern physics.
Surveillance Security System(66652)

Subject Name : Surveillance Security System
Subject Code : 66652
Technology : Computer
Semester : 5th

Subject Aims:

After completing this course, participants will be able to:
• Interact with the customer in order to identify and understand their requirements.
• Ensure customer satisfaction
• Install and Repair dysfunctional system.
• Identify dysfunctional components through visual inspection and by use of multi meter
• To understand surveillance system installation requirement in terms of equipment, system, tools, applications appropriate for a particular site
• Install and Configure access control device and software
• Select Suitable cameras & DVR/NVR to provide the better solution to the customers.
• Read and Comprehend signs, labels and warning
• Communicate effectively
• Follow behavior etiquettes while interacting with others
• Establishing good working relationships with colleagues within and outside the department by
Coordinating Surveillance system Installation Technician

Subject Outcome:
Basic concepts of Designing the surveillance security System, Aims of a surveillance camera system, System design elements, Conditions for equipment selections, Camera Installation, Functions of video surveillance, Types of Camera, Lens, sensors & their functions, DVR, NVR interface, Principles of remote access, networking Basic.
Certification icon
Interior Project(68771)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 3rd Semester)
Objectives of the Course
After completion of the course students will be able to:
❖ Understand the Individual space interior
❖ Can draw the Related Drawing
❖ Learn about the considering materials
❖ Develop knowledge, skill and attitude of preparing different types of Interior Project.
AC Machines - 2 (66771)
Course Conducted By
Md.Shafikul Islam (Milon)
Head of Department
Electrical Technology.
Daffodil Polytechnic Institute

AIMS
To provide the student with an opportunity to acquire knowledge, skill and attitude in the area of alternating current machines with special emphasis on:
1. Alternator
2. Synchronous motor
3. Single phase motor Motor control.

SHORT DESCRIPTION
Alternators: Principle, construction, emf equation, effect of load on alternator; voltage regulation, parallel operation and starting procedure of alternator; Synchronous motor: Operation, torques and excitation, Phase swinging, Starting method and uses, Power factor correction; Single phase motor: Operation of single phase motor; Operation of AC commentator motor; Motor control: Speed control of single phase motor; Starting of three phase induction motor; Controlling speed of three phase induction motor.
Perspective Drawing & Rendering(68744)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for Diploma in Engineering (AIDT 4th Semester)

Objectives of the Course
After completion of the course students will be able to:
 System and method of perspective drawing
 About One point perspective drawing
 About Two point perspective drawing
 About Three point perspective drawing
 Technique of distortion in perspective drawing
 Shades and shadows on perspective drawing
Electrical Installation Planning and Estimating (26741)
Course Conducted By
Rubel Hossen
Instructor
Electrical & Telecommunication Technology.
Daffodil Polytechnic Institute

OBJECTIVES
After completion of these contents students will be able to acquire, achieve and develop:
 To acquire knowledge and skills of Electrical house wiring.
 To develop the capacity to know constructional details and working principles of electric lamps.
 To develop understanding about earthing.
 To develop understanding about controlling and protective devices.
 To acquaint the principles of Electro-magnetic Induction.
 To familiarize Magnetism and magnetization
SHORT DESCRIPTION
Advance wiring; Electric lamps; Earthing; Controlling and Protective devices; Electro-magnetic Induction;
Magnetism and Magnetization; Hysteresis and eddy current loss; Energy stored in magnetic field
Advanced Knitting & Non Woven (1975)
Scouring; Souring; Bleaching; color & concept of color; Dye & dyeing; Direct dyes; Basic dyes; Acid dyes; Vat dyes and Reactive dyes.
Fabric Structure Design & Color (5055)
CONDUCTED BY:
Md. Ashikur Rahman
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
INTENTION :
To provide the student with an opportunity to acquire knowledge, skill and attitude in the area of fabric structure and cloth analysis with special emphasis on:
● Fabrics design
● Fabrics construction
● Fabrics drafting & lifting plan
● Analysis of cloth
SHORT DESCRIPTION
Basic Concepts of textile design and artistic design; Drafting and lifting. Weaving structure; Plan weave; Twill weave; Satin and sateen weave; Ornamentation of fabrics design; Figuring with extra threads; Double cloth Backed cloth; Leno weave; Velvet; Terry; and Analysis of cloth.
Garments Dyeing Washing and Finishing (5072)
CONDUCTED BY:
MD.ASFAKUR RAHMAN
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
INTENTION:
To be able to develop knowledge, skill and attitude in the area of garments dyeing, washing and finishing with special emphasis on:
 garments dyeing, steaming & drying
 garments washing and finishing
 enzyme, De-Lusturing and brightening finish of garments
 drying machine and ironing of garments.
SHORT DESCRIPTION
Garments washing; Stone wash; Chemical wash; Garments finishing; Enzyme finish; De-Lusturing finishing of garments; Brightening finish of garments; Garments dyeing; Steam of garments; Drying machine; Ironing of garments.
Printing & Finishing Process (5054)
CONDUCTED BY:
MD.ASFAKUR RAHMAN
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.

INTENTION :
To be able to develop knowledge, skill and attitude in the field of printing and finishing process with special emphasis on:
printing, printing paste and ingredients
printing thickness and printing machinery
method and style of printing
ageing and steaming
printing and finishing
sunforising and calendaring.

SHORT DESCRIPTION

Printing; Printing paste and ingredients; Printing thickness; Methods and styles of printing; Printing machinery; Ageing and steaming; Printing of cellulose fabric; Printing of wool and silk fabrics; Printing with disperse dye; Printing with pigments; Textile finishing; Sunforising; Calendering and Anti creasing.
System Analysis & Design (66671)
Subject Teacher : Md.Rajib Ahamed (Instructor).
Subject Name : System Analysis and Design.
Subject Code : 66671
Technology : Computer.
Semester : 7th

Reference Book Name :
1). System Analysis and Design (Publisher: Hoque Publication).
2). System Analysis and Design - Elias M. Awad
3). Analysis and Design of Information Systems - V. Rajaraman
4). System Analysis and Design Methods - Whitten, Bently, Barlow

Subject Aims:
To provide the students with an opportunity to acquire knowledge, skill and attitude in the fields of system analysis, design and computer based development with special emphasis on system concept, system development life cycle, system analysis, system design & Development, implementation & Information security and object-oriented system design.

Subject Outcome:
System concept, system development life cycle, system analysis, system design & Development, implementation& Information security and object-oriented system design.
Certification icon
Multimedia Application (69475)
Shuva Sarker
Jr. Instructor
Telecommunication Department
Daffodil Polytechnic Institute
Construction Process-2(66451)
Course Conducted by
Md.Josim Uddin.
Jr. Instructor,
Daffodil Polytechnic Institute.

This Course for: Diploma in Engineering (5th Semester Civil)

AIMS
After completion of the course the students will be able to:
 Understand the construction process of arch and lintel.
 Understand the construction process of different types of floor.
 Understand the construction process of stairs.
 Understand the construction process of different types of roof.
 Understand the different finishing works in building.
 Understand the construction process of doors and windows.
 Understand the different operation and maintenance construction equipment.
 Understand the construction of bridge, culvert, canals etc.

SHORT DESCRIPTION
Arches; Lintels; Ground floors; Upper floors; Damp proofing; Termite treatment; Stairs; Roof; Pitched
roof; Plastering and pointing; Doors; Windows; Carpentry and joinery; Scaffolding; Form works, Pointing
& Varnishing, construction equipment, Building Services, Insulation, bridge/culverts and canals etc.
Surveying-3 (66452)
Course Conducted by
Md. Zahidul Islam
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)

AIMS
 To be able to set out different types of curve.
 To be able to conduct sounding.
 To be able to learn using total station,
 To be able to perform city survey.

SHORT DESCRIPTION
Curve ranging; Setting out Plan/alignment; Hydrographic survey; Total station; City survey.
Water Supply Engineering (66453)
Course Conducted by
Uchingla Marma
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)

AIMS
 To enable to select suitable methods for collection and distribution of water from given source to
given community.
 To enable to identify impurities of water of given sources and selected suitable method/methods of
purification up to potable standard.
 To assist in comparing various types of water pipes and pipe fittings.
 To develop understanding of the procedure of construction, repair, replacement and maintenance
of water supply systems.
 To provide understanding of the socio-economic aspect of water supply and sanitation (WSS).

SHORT DESCRIPTION
Introduction; Water requirements; Sources of water; Water pipes; Collection and transmission of water;
Quality of water; Treatment of water (clarification); Treatment of water (filtration); Treatment of water
(disinfection and softening); Miscellaneous water treatment; Water distribution; Water reservoir;
Distribution system; Rural water supply system; Plumbing system.
Construction Management & Documentation
Course Conducted by
Md. Zahidul Islam
Jr. Instructor, Civil Technology
Daffodil Polytechnic Institute.

This Course for: Diploma in Engineering (7th Semester,Civil)

AIMS:
 To be able to understand the modern techniques of construction management.
 To be able to understand the operational research & site layout and organization.
 To be able to understand the mobilization of materials in construction management.
 To be able to understand the quality and cost control.
 To be able to understand the Pre-tender and Post-tender planning.
 To be able to prepare pre-qualification documents.
 To be able to evaluate pre-qualification documents.
 To be able to prepare technical specifications.
 To be able to prepare financial evaluation.
 To be able to prepare contract clauses.
 To be able to prepare tender documents.
 To be able to prepare contract documents.
 To be able to prepare Quality control document.
 To be able to understand the cost control.
 To be able to develop knowledge, skill and attitude of evaluating tenders and preparing
comparative statement.

SHORT DESCRIPTION
Principles of management and construction; Organization of contracts department; Operational
research; Site layout and organization; Mobilization of materials; Demobilization of STRUCTURE; Safety
in construction; Quality and cost control; Codes and building by-laws; Tender; Pre-tender and Posttender planning; Tender document; Tender notice; Instruction to tender; Contract clauses/condition of
contract; Technical specifications of materials and works; Pre-qualification of contractors; Evaluation
and comparative statement; Contract agreement.
Sanitary Engineering (66472)
Course Conducted by
Md. Josim Uddin
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (7th Semester,Civil)

AIMS
 To be able to compare various methods and techniques used to treat and dispose of sewage and control of
water pollution and select appropriate methods for given situations.
 To be able to identify various sewer pipes, fittings, procedures of construction, repair, replacement
and maintenance of sewage disposal system.
 To be able to determine the size of circular sewer pipes, septic tanks and soak pit of sewage
disposal system.
 To be able to compare various types of pit latrine and biogas generating plants.
 To be able to understand the basic concept of solid waste and management.
 To be able to understand the basic concept of ETP

SHORT DESCRIPTION
Sewage; Sewer pipe; Sewer appurtenance; Flow in sewer; Construction of sewer; Maintenance of
sewer; Characteristics of sewage; Sewage disposal; Preliminary Sewage treatment system; Secondary
treatment system; Sludge treatment and disposal; Effluent Treatment Plant; Water pollution and its
effects on the environment; Rural sanitation; Health and hygiene; Generation of biogas; Sources and
classification of solid waste; Municipal and industrial solid waste; different steps of solid management.
New Content
Water Resource Engineering (66475)
Course Conducted by
Uchingla Marma Rupu
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (7th Semester,Civil)

AIMS
• To provide understanding on the influence of the climatic condition of Bangladesh on its ground
water and surface water flow
• To provide understanding of recharging of underground water and ascertain its necessity in
Bangladesh.
• To enable to select a suitable source of water and method of irrigation for particular situation.
• To enable to select a suitable method of drainage for particular situation.
• To enable to select a suitable method for control of rivers and flood in Bangladesh.
• To understand rain water harvesting.

SHORT DESCRIPTION
Sources of water; Rainfall and run-off; Lifting of underground water; Storing and Recharging of
ground/rain water; Irrigation and its effect; Well irrigation; Water requirements for crops; and quality
of irrigation water; Storage reservoir; Dam and dyke; Irrigation canals; Silt deposit; Scouring; Canal
works; Drainage; River training works; Flood and flood management and flood control; Irrigation
projects in Bangladesh.
Mathematics-3 (Textile)
Course Conducted by
Farha Diba,
Sr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Textile Engineering
Book Keeping & Accounting
Prepared by: Benojir Tabassum
Instructor
Deffodil polytechnic institute
New Content
Structural mechanics (66441)
AIMS:
• To enable to apply the knowledge of scientific principles to problems of mechanical nature.
• To develop an understanding of mechanical properties of materials.
• To assist in applying mathematical and geometrical calculations to the analysis of statically
determinate beams.

SHORT DESCRIPTION
Mechanical properties of material; Laws of forces; Moment; Friction; Centroid and centre of gravity;
Moment of inertia; Torsion on circular shaft; Shear force and bending moment.
Physics-1(5912)
To provide a foundation in scientific principals and processes for the understanding and application of technology. It will help our students to make a common base for further studies in technology and science. It also help to develop the basic knowledge of modern physics.
Wet Processing- 3
Course Conducted by
Rumana Rashid Tandra
Instructor (Textile & GDPM)
Daffodil Polytechnic Institute.
This Course for: Diploma in Textile Engineering
Optic Fiber Communications
Optic Fiber Communications (69461)
Created by
Abdur Rahman
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute

SHORT DESCRIPTION
Fiber optic communication; optical fiber waveguides; transmission characteristics of fiber optics; optical
fibers; optical fiber cables; optical fiber Joints; couplers and isolators; Optical source: LASER, LED;
Optical detection; Optical detector detection receiver performance; Optical amplification, wavelength
conversion and regeneration; intensity modulation/direct detection; Optical fiber measurements
Optical Networks.
Transmission & Distribution of Electrical Power-1(66763)
Course Conducted By
Md.Husne Fahad
Instructor
Electrical Technology.
Daffodil Polytechnic Institute

AIMS
My students will be able to acquire knowledge, skills and attitude in the area of transmission and distribution electrical power with special emphasizes on:
 Transmission and distribution systems of electrical power.
 Comparison of different types of transmission and distribution systems.
 Electrical and Mechanical design of overhead lines.
 Survey of transmission and distribution line routes.
 Voltage regulation and Efficiency of transmission lines.

SHORT DESCRIPTION

Different systems of transmission; Aspect of transmission system; Mechanical design of overhead lines; support of overhead lines; conductors & conductor materials; Insulators; Effect of sag; Methods for survey of transmission/distribution line route; Voltage distribution of suspension insulator; Corona; Erection of poles and drawing of conductors of overhead lines; Electrical design of overhead line; Resistance of the line conductor; Skin effect of transmission line; Effect of inductance on transmission line; Effect of capacitance of overhead transmission line; Voltage regulation and efficiency of short transmission line.

Certification icon
Basics of Telecommunication (29411)
Course Conducted By
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 1st Semester)
Objectives of the Course
After completion of the course students will be able to:

Basic Telephony (1G, 2G, 3G, 4G,LTE And UMTS)
o Wireless and Cellular/Mobile Radio
o Wi-MAX, Wi-Fi, VOIP, PCS
o Local and Long-Distance Communications
o Image Communications
o Transmission Media , Media Gateway Control Protocol
o Telephone switching
o Voice over Internet Protocol (VoIP) and VoIP Gateway
o Telephony and Telegraph system, (NWD, ISD and PSTN)
o Telecommunication standardization organization
o OSI Model
o Bangladesh Telecommunication Regulatory Commission , function , Acts, mission and vision of BTRC
Digital Electronics-1 (26831)
Course Conducted By
MD. Badeuzzamal Sarker
Instructor
Electrical Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (CMT 4th Semester)
Objectives of the Course
After completion of the course students will be able to:
You will get concept of digital electronics; Logic gates, Boolean algebra and logic simplification &Combinational logic circuits.
Wireless Communication & Networking
Course Conducted By
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 6th Semester)
Objectives of the Course
After completion of the course students will be able to:
Introduction to Wireless communication, Modern wireless communication system, third generation(3G) wireless
network, fourth generation(4G) wireless network, cellular network, Amplitude Modulation(AM), Frequency
Modulation(FM), Linear Modulation technique, Constant envelope modulation technique, equalization, diversity
and channel coding, polarization diversity, frequency diversity, time diversity, different types of multiple access,
packet radio protocols, several types of wireless network, wireless system standard and 4th Industrial Revolutions.
Art of Living
Developed by:
Md. Sabur Khan &
Syed Mizanur Rahman
Daffodil International University
CAD-1 (68742)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 4th Semester)

Subject Aims:
After completion of the course students will be able to:
❖ Drawing environments and drawing aids.
❖ Different setup of drawing in Auto CAD.
❖ Drawing commands. • Modification & edits of drawing.
❖ Printing the drawing elements.

Subject Outcome:
● Student will know About Drawing environments and drawing aids.
● Can ensure different setup of drawing in Auto CAD.
● Learn about Drawing commands.
● Can be able to Modification & edits of drawing.
● Can Practice how to Print the drawing elements.

Air Conditioning & Acoustics(68764)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 6th Semester)

Subject Aims:
After completion of the course students will be able to:
❖ To be able to understand the fundamental of air condition.
❖ To be able to understand the construction procedure of air condition syste
m.
❖ To be able to understand the fundamental of architectural acoustics.
❖ To be able to prepare materials schedule, cost and development process.
Subject Outcome:
▪ Student will know about Materialsfor air conditioning system.
▪ Will learn the list of Acoustics materials.
▪ Can Design false ceiling.
▪ Knowing Aboutsound absorption.
▪ Can learn about auditorium acoustics etc.
▪ Can Estimate the Cooling & heating load after calculation. K, C, R & U factor.
▪ Will be able to design varioustypes of lighting
Interior Working Drawing-2 (68762)
Course Conducted By
Nishat Akter Munia
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 6th Semester)

Subject Outcome:
 To be able to understand
 The working drawing of residential building plan procedure,
 The working drawing of residential building furniture drawing procedure,
 The working drawing on kitchen & toilet with fixture & fittings,
 The working drawing of false ceiling,
 Wall partition
 Cabinet and floor and materials.

Data Communication System for 4th CMT-A / 6th TCT (66644)
Subject Teacher: Md. Rajib Ahamed(Instructor)
Subject Name: Data CommunicationSystem
Subject Code: 66644
Technology: Computer
Semester: 4th-A
Reference Book: Computer Networks. By ANDREW S.TANENBAUM
Text Book: Data Communication System
(Publisher: HaqueProkashani / Technical Prokashoni)

INTENTION
AIMS
• To be able to acquire the knowledge on data communication Basics.
• To be able to provide the knowledge and to develop skill on signal and data transmission systems and transmission media.
• To be able to acquire the knowledge on Digital communication and computer networks.
• To be able to provide the knowledge and to develop skill on network topologies and protocols.
• To be able to provide the knowledge and to develop skill on MODEM, Hub, Switch, NICand Repeater.
• To be able to establish and implement a LAN to provide Network services.

SHORT DESCRIPTION
Communication Basics; Analog and Digital Modulation and Demodulation; Analog and Digital communication; Transmission media and connectors; LAN, Network fundamentals; Peer‐peer & Client‐Server techniques; Topologies and protocols; NIC; Network Addressing; IP address and Subnet Mask.
Computer Architecture & Microprocessor for 5th CMT (28553)
Subject Teacher : Md. Rajib Ahamed (Instructor).
S Subject Name : Microprocessor & Interfacing.
S Subject Code : 66662
T Technology : Computer.
Semester : 6th
Reference Book Name : Microprocessor & Interfacing (Publisher: Hoque Publication). The 8086 and 80286 Microprocessor - Avatar Singh. Microprocessors and Interfacing: Programming and Hardware - Douglas V. Hall.

Subject Aims:
 To be able to acquire the knowledge on microprocessor, microcomputer.
 To be able to develop the knowledge and skill on the architecture and assembly
Language programming of 16- bit microprocessor.
 To be able to acquire the knowledge and skill on memory, interrupt and I/O
Interfacing.

Subject Outcome:
⮚ Concept of microprocessor, Basic conception of microprocessor and microcomputer, Architecture
and addressing mode of Intel 8086p.
⮚ Instruction timing of Intel 8086 p; Memory, input /output and interrupt interfacing of Intel 8086
p.
 Interfacing principle and peripheral devices; programming of Intel 8086/8088; Intel x86 family,
multi-core processor idea.
Basic Estimating & Costing (66447)
Introduction to estimating, Quantity estimation of excavating tank, road embankment, canal digging,
Steps, boundary wall, bituminous & RCC road, estimate of a single storied two-roomed building with
Verandah and double storied building, rate analysis.
Surveying- 2
Subject Teacher : Md. Zahidul Isam, Jr. Instructor
Subject Name : Geotechnical Engineering
Subject Code : 66445
Technology : Civil
Semester :4th

AIMS:
At the end of the course the students will be able:
 To use level and theodolite.
 To conduct leveling work.
 To recognize errors in leveling.
 To conduct traversing with theodolite.
 To determine horizontal and vertical distances of inaccessible points.

SHORT DESCRIPTION
Leveling; Errors in leveling; Contouring; Theodolite traversing, Trigonometrical leveling and Topographic surveying,
TEXTILE TESTING & QUALITY CONTROL (5045)
CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute

Subject Aims:
Basic aspects of textile testing, humidity, moisture in textiles, sampling, identification of textile fibers, fiber length & its measurement, fiber strength & its measurement, Trash, naps & their measurement, fiber fineness &its measurement, micromere value, fiber maturity

Subject Outcome:
Students will be understood with an opportunity to acquire knowledge & skill about Testing,
Techniques & System of Testing. The operating system of different modern Testing instruments,
Interpretation & Analysis of testing data use & Maintenance of testing instruments.
Apparel Testing (5063)
Course Conducted by
Asif Shahriar
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in GDPM
Garments Manufacturing-1
Course Conducted by
Sabina Yasmin Koli
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in GDPM Technology
Social Science 25811
Civic and Social Sciences; Individual and Society; Nation and Nationality; Citizenship; state and government; Law; Constitution Government and its organs;
public Opinion; Political Party; UNO And its organs; Scope and importance of Economics; Basic concepts of Economics- Utility, Wealth, consumption, income
wages and salary and savings; Production- meaning, nature, factors and laws; demand and supply; Current economic problems of Bangladesh; Role of Diploma
engineers in the economic development of Bangladesh; Occupations and career planning; Engineering team.
Interior Working Drawing -1(68752)
Course Conducted By
Nishat Akter Munia
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 5th Semester)

To be able to draw the working drawing of living room, dining room, bedroom.
To be able to draw the working drawing of kitchen, toilet.
To be able to draw the working drawing of a 2bedroom house.
To be able to draw the working drawing of door and window.
Industrial Management (65852)
Industrial Management (65852)

* To be able to develop the working condition in the field of industrial or other organization.
* To be able to understand develop the labor management relation in the industrial sector.
* To be able to develop the management techniques in the process of decision making.
* To be able to manage the problems created by trade union.
* To be able to understand planning.
* To be able to perform the marketing.
* To able to maintain inventory.

 SHORT DESCRIPTION
Basic concept of management; Principles of management; planning, Organization, Scientific management; span of supervision; Motivation; Personal Management & human relation ; Staffing and manpower planning; Training of Staff; Concepts and techniques of decision making; Concept of Leadership; Concept of trade union; Inventory control; Economic lot size; Break even analysis; Trade Union and industrial dispute, Marketing.
Innovation & Entrepreneurship (65853) (7th Civil + 7th AIDT + 7th CMT-A 7th CMT-B 7th ET + 7th TCT)
Course conducted by
Md. Jakir Hossen
Instructor for Business Studies
General Education Department
Daffodil Polytechnic Institute
DESCRIPTION
Concepts of entrepreneurship & entrepreneur; Entrepreneurship & economic development; Environment for entrepreneurship; Entrepreneurship in the theories of economic growth; Sources of ventures ideas in Bangladesh; Evaluation of venture ideas; Financial planning; Project selection; Self-employment; Entrepreneurial motivation; Business plan; Sources of assistance & industrial sanctioning procedure; Concept of SDG; SDG 4,8 .
AIMS
• To be able to understand the concept of entrepreneurship & entrepreneur.
• To be able to understand the concept of environment for entrepreneurship.
• To be able to understand the sources of venture ideas in Bangladesh.
• To be able to understand the project selection.
• To be able to understand business planning.
• To be able to understand the insurance and premium.
• To be able to understand the MDG & SDG.
Environmental Management - 5840
AIMS:
The aims are to enable candidates to acquire: • knowledge of natural systems which make life possible on Earth • an understanding that humans are part of these systems and depend on them • an appreciation of the diverse influences of human activity on natural systems • an awareness of the need to manage natural systems • an understanding of sustainable development to meet the needs of the present, without compromising the ability of future generations to meet their own needs • a sense of responsibility and concern for the welfare of the environment and all organisms • an awareness of their own values concerning environmental issues • an awareness of the values of others • a willingness to review their own attitudes in the light of new knowledge and experiences • a sound basis for further study, personal development and participation in local and global environmental concerns.

SHORT DESCRIPTION:
Basic concepts of environment; Ecology & eco-systems; global environmental issues Air and atmospheric layers; Air pollution sources & effects; climate change, green house effect and depletion of ozone layer; Control of air pollution; Water pollution sources & effects; Monitoring of water pollution; Waste water treatment; Sound pollution and its control; Soil pollution and its management; Radioactive pollution and its control; Solid waste management; Major environmental issues and disaster management- Arsenic pollution; Pesticides pollution and its management, Environmental legislations and guidelines frame work and policy in Bangladesh.
Advance Surveying 66461
The course on Advanced Surveying offers a comprehensive exploration of advanced techniques, methodologies, and technologies employed in the field of surveying. Building upon the fundamental principles of surveying, this course delves into the intricacies of precise measurements, data analysis, and spatial data management.

Throughout the course, students will develop an in-depth understanding of advanced surveying methods used in diverse applications, such as land development, infrastructure planning, environmental monitoring, and construction projects. By integrating theoretical concepts with practical exercises, this course equips students with the necessary skills to address complex surveying challenges effectively.

Key Topics Covered:

Geodetic and Control Surveying: Understanding geodetic datums, reference systems, coordinate transformations, and control point establishment for large-scale projects.
GNSS (Global Navigation Satellite Systems): Leveraging satellite-based positioning techniques, including GPS, GLONASS, and Galileo, to achieve precise and accurate measurements.
Remote Sensing and Photogrammetry: Utilizing aerial and satellite imagery, LiDAR, and digital photogrammetric techniques for terrain modeling, feature extraction, and mapping.
Geographic Information Systems (GIS): Applying spatial data analysis, database management, and visualization techniques to support surveying operations and decision-making processes.
Terrestrial Laser Scanning: Exploring 3D laser scanning technology for high-resolution mapping, deformation monitoring, and volumetric calculations.
Digital Terrain Modelling (DTM) and Digital Elevation Modelling (DEM): Creating accurate representations of the Earth's surface using advanced elevation data processing techniques.
Construction Surveying and Building Information Modeling (BIM): Understanding surveying procedures in construction projects and integrating survey data within the BIM framework.
Advanced Data Analysis and Error Estimation: Developing skills in statistical analysis, error propagation, and uncertainty estimation to ensure the reliability of surveying results.
Legal and Ethical Considerations: Examining legal frameworks, standards, and professional ethics relevant to surveying practices, including land boundaries and cadastral systems.
By the end of this course, students will be equipped with the necessary theoretical knowledge and practical skills to tackle complex surveying tasks, leverage cutting-edge surveying tools and technologies, and make informed decisions in various professional contexts. Whether pursuing a career in land surveying, civil engineering, or geospatial analysis, this course provides a solid foundation for success in the field of advanced surveying.
Electrical Engineering drawing(26722)
Course Conducted By
MD SHAHRIYAR RAHMAN
Instructor
Daffodil Polytechnic Institute

Course Conducted By
Pulak Biswas
Instructor
Daffodil Polytechnic Institute

After undergoing the subject, students will be able to:
 Sketch different electrical engineering drawings.
 Draw isometric, oblique and orthographic views.
 Enable to interpret and skill to draw thread and fastening
devises.
 Develop skill in drawing the symbols for electrical components
and equipment.
 Develop skill in drawing the layout diagram of overhead
distribution lines.

 Develop skill in drawing the layout diagram of a small sub-
station.

 Draw electrical layout diagram of a residential building


Python Programming for 2nd CST (28521)
Subject Teacher : Md. Rajib Ahamed (Instructor).
Subject Name : Python Programming
Subject Code : 28521
Technology : Computer Science & Technology
Semester : 2nd
Reference Book : (1). Python Programming (Publisher: Hoque Publication)
(2). Learning Python-Mark Lutz (5th Edition)
(3). Python Programming: An Introduction to Computer Science-John Zelle (3rd Edition)
(4). Python for Data Analysis: Data Wrangling with Pandas, NumPy and IPython-Wes Mckinney (2nd Edition)
(5). Learn Python the Hard Way-ZED SHAW (3rdEdition).

Subject Aims:
To provide the students with an opportunity to acquire knowledge, skills and attitude in the area. To develop knowledge and skill on programming and problem-solving. To develop knowledge and skill to create, compile, debug & execute a program.

Subject Outcome:
After undergoing the subject, students will be able to develop knowledge of the Basics of programming language, Basics of python, Variables and data types, String processing, Python operators, Branch, Loop, List, Tuple, Set, Dictionary structures, Function, and I/O operation of Python Programming Language.