All Courses

Daffodil Polytechnic Institute ×
Mathematics-3(Diploma)
Mathematics-1(Diploma)

 To enable to calculate the areas of regular polygons, hexagons, octagon, hydraulic mean depth (HMD) of a
channel, area occupied by water of circular culvert. Excavation work.
 To provide the ability to calculate volume of regular solids like pyramid frustum of pyramid, prismoid,
wedge and area of curved surfaces.
 To enable to use the knowledge of gradient of a straight line in finding speed, acceleration etc.
 To enable to use the knowledge of conic in finding the girder of a railway bridge, cable of a suspension
bridge and maximum height of an arch.
 To make understand the basic concept and techniques of composition and resolution of vectors and
computing the resultant of vectors.

 SHORT DESCRIPTION
Menstruation: Area of rectangles, squares, triangles, quadrilaterals, parallelograms, rhombus, trapezium, circle,
sector, segment; Volume of rectangular solids, prism, parallelepiped, pyramids, cones, spheres, frustum of pyramid
and cone; Area of curved surface of the prism, Cylinder cone, pyramid and frustum of cone.
Co-ordinate Geometry: Co-ordinates of a point, locus and its equation, straight lines, circles and conic.
Vector: Addition and subtraction, dot and cross product
Physics-2 (5922 & 65922)
To provide a foundation in scientific principals and processes for the understanding and application of technology. It will help our students to make a common base for further studies in technology and science. It also help to develop the basic knowledge of modern physics.
Surveillance Security System(66652)
Subject Aims:

After completing this course, participants will be able to:
• Interact with the customer in order to identify and understand their requirements.
• Ensure customer satisfaction
• Install and Repair dysfunctional system.
• Identify dysfunctional components through visual inspection and by use of multi meter
• To understand surveillance system installation requirement in terms of equipment, system, tools, applications appropriate for a particular site
• Install and Configure access control device and software
• Select Suitable cameras & DVR/NVR to provide the better solution to the customers.
• Read and Comprehend signs, labels and warning
• Communicate effectively
• Follow behavior etiquettes while interacting with others
• Establishing good working relationships with colleagues within and outside the department by
Coordinating Surveillance system Installation Technician

Subject Outcome:
Basic concepts of Designing the surveillance security System, Aims of a surveillance camera system, System design elements, Conditions for equipment selections, Camera Installation, Functions of video surveillance, Types of Camera, Lens, sensors & their functions, DVR, NVR interface, Principles of remote access, networking Basic.
Certification icon
Interior Project(68771)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 3rd Semester)
Objectives of the Course
After completion of the course students will be able to:
❖ Understand the Individual space interior
❖ Can draw the Related Drawing
❖ Learn about the considering materials
❖ Develop knowledge, skill and attitude of preparing different types of Interior Project.
AC Machines - 2 (66771)
Course Conducted By
Md.Shafikul Islam (Milon)
Instructor
Electrical Technology.
Daffodil Polytechnic Institute

AIMS
To provide the student with an opportunity to acquire knowledge, skill and attitude in the area of alternating current machines with special emphasis on:
1. Alternator
2. Synchronous motor
3. Single phase motor Motor control.

SHORT DESCRIPTION
Alternators: Principle, construction, emf equation, effect of load on alternator; voltage regulation, parallel operation and starting procedure of alternator; Synchronous motor: Operation, torques and excitation, Phase swinging, Starting method and uses, Power factor correction; Single phase motor: Operation of single phase motor; Operation of AC commentator motor; Motor control: Speed control of single phase motor; Starting of three phase induction motor; Controlling speed of three phase induction motor.
Perspective Drawing & Rendering(68744)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for Diploma in Engineering (AIDT 4th Semester)

Objectives of the Course
After completion of the course students will be able to:
 System and method of perspective drawing
 About One point perspective drawing
 About Two point perspective drawing
 About Three point perspective drawing
 Technique of distortion in perspective drawing
 Shades and shadows on perspective drawing
Advance Electricity (66732)
OBJECTIVES
After completion of these contents students will be able to acquire, achieve and develop:
 To acquire knowledge and skills of Electrical house wiring.
 To develop the capacity to know constructional details and working principles of electric lamps.
 To develop understanding about earthing.
 To develop understanding about controlling and protective devices.
 To acquaint the principles of Electro-magnetic Induction.
 To familiarize Magnetism and magnetization
SHORT DESCRIPTION
Advance wiring; Electric lamps; Earthing; Controlling and Protective devices; Electro-magnetic Induction;
Magnetism and Magnetization; Hysteresis and eddy current loss; Energy stored in magnetic field
Advanced Knitting & Non Woven (1975)
Scouring; Souring; Bleaching; color & concept of color; Dye & dyeing; Direct dyes; Basic dyes; Acid dyes; Vat dyes and Reactive dyes.
Textile Calculation-2 (1977)
CONDUCTED BY:
Md.Asfakur Rahman
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.

INTENTION
To develop the basic knowledge to calculate :
a) Winding b) Warping
c) Sizing d) Loom and knitting production.
e) Read count and heald count. f) Fabric calculation
g) Fabric requirement in garment. h) Sewing thread consumption
i) Costing j) Gearing Calculation

SHORT DESCRIPTION:
Calculation of winding; Calculation of warping; Calculation of sizing;Calculation of heald count and Reed count; Calculation of loom and
knitting productions,Cloth calculation; Calculation of cloth requirement in garments; Sewing thread consumption & costing.
Fabric Structure Design & Color (5055)
CONDUCTED BY:
MD.ASFAKUR RAHMAN
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
INTENTION :
To provide the student with an opportunity to acquire knowledge, skill and attitude in the area of fabric structure and cloth analysis with special emphasis on:
● Fabrics design
● Fabrics construction
● Fabrics drafting & lifting plan
● Analysis of cloth
SHORT DESCRIPTION
Basic Concepts of textile design and artistic design; Drafting and lifting. Weaving structure; Plan weave; Twill weave; Satin and sateen weave; Ornamentation of fabrics design; Figuring with extra threads; Double cloth Backed cloth; Leno weave; Velvet; Terry; and Analysis of cloth.
Garments Dyeing Washing and Finishing (5072)
CONDUCTED BY:
MD.ASFAKUR RAHMAN
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
INTENTION:
To be able to develop knowledge, skill and attitude in the area of garments dyeing, washing and finishing with special emphasis on:
 garments dyeing, steaming & drying
 garments washing and finishing
 enzyme, De-Lusturing and brightening finish of garments
 drying machine and ironing of garments.
SHORT DESCRIPTION
Garments washing; Stone wash; Chemical wash; Garments finishing; Enzyme finish; De-Lusturing finishing of garments; Brightening finish of garments; Garments dyeing; Steam of garments; Drying machine; Ironing of garments.
Printing & Finishing Process (5054)
CONDUCTED BY:
MD.ASFAKUR RAHMAN
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.

INTENTION :
To be able to develop knowledge, skill and attitude in the field of printing and finishing process with special emphasis on:
printing, printing paste and ingredients
printing thickness and printing machinery
method and style of printing
ageing and steaming
printing and finishing
sunforising and calendaring.

SHORT DESCRIPTION

Printing; Printing paste and ingredients; Printing thickness; Methods and styles of printing; Printing machinery; Ageing and steaming; Printing of cellulose fabric; Printing of wool and silk fabrics; Printing with disperse dye; Printing with pigments; Textile finishing; Sunforising; Calendering and Anti creasing.
Construction Process-2 (66451)
Course Conducted by
Md.Josim Uddin.
Jr. Instructor,
Daffodil Polytechnic Institute.

This Course for: Diploma in Engineering (5th Semester Civil)

AIMS
After completion of the course the students will be able to:
 Understand the construction process of arch and lintel.
 Understand the construction process of different types of floor.
 Understand the construction process of stairs.
 Understand the construction process of different types of roof.
 Understand the different finishing works in building.
 Understand the construction process of doors and windows.
 Understand the different operation and maintenance construction equipment.
 Understand the construction of bridge, culvert, canals etc.

SHORT DESCRIPTION
Arches; Lintels; Ground floors; Upper floors; Damp proofing; Termite treatment; Stairs; Roof; Pitched
roof; Plastering and pointing; Doors; Windows; Carpentry and joinery; Scaffolding; Form works, Pointing
& Varnishing, construction equipment, Building Services, Insulation, bridge/culverts and canals etc.
Surveying-3 (66452)
Course Conducted by
Md. Shazzad Hossain
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)

AIMS
 To be able to set out different types of curve.
 To be able to conduct sounding.
 To be able to learn using total station,
 To be able to perform city survey.

SHORT DESCRIPTION
Curve ranging; Setting out Plan/alignment; Hydrographic survey; Total station; City survey.
Water Supply Engineering (66453)
Course Conducted by
Uchingla Marma
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)

AIMS
 To enable to select suitable methods for collection and distribution of water from given source to
given community.
 To enable to identify impurities of water of given sources and selected suitable method/methods of
purification up to potable standard.
 To assist in comparing various types of water pipes and pipe fittings.
 To develop understanding of the procedure of construction, repair, replacement and maintenance
of water supply systems.
 To provide understanding of the socio-economic aspect of water supply and sanitation (WSS).

SHORT DESCRIPTION
Introduction; Water requirements; Sources of water; Water pipes; Collection and transmission of water;
Quality of water; Treatment of water (clarification); Treatment of water (filtration); Treatment of water
(disinfection and softening); Miscellaneous water treatment; Water distribution; Water reservoir;
Distribution system; Rural water supply system; Plumbing system.
Construction Management & Documentation
Course Conducted by
Md. Josim Uddin
Jr. Instructor,
Daffodil Polytechnic Institute.

This Course for: Diploma in Engineering (7th Semester,Civil)

AIMS:
 To be able to understand the modern techniques of construction management.
 To be able to understand the operational research & site layout and organization.
 To be able to understand the mobilization of materials in construction management.
 To be able to understand the quality and cost control.
 To be able to understand the Pre-tender and Post-tender planning.
 To be able to prepare pre-qualification documents.
 To be able to evaluate pre-qualification documents.
 To be able to prepare technical specifications.
 To be able to prepare financial evaluation.
 To be able to prepare contract clauses.
 To be able to prepare tender documents.
 To be able to prepare contract documents.
 To be able to prepare Quality control document.
 To be able to understand the cost control.
 To be able to develop knowledge, skill and attitude of evaluating tenders and preparing
comparative statement.

SHORT DESCRIPTION
Principles of management and construction; Organization of contracts department; Operational
research; Site layout and organization; Mobilization of materials; Demobilization of STRUCTURE; Safety
in construction; Quality and cost control; Codes and building by-laws; Tender; Pre-tender and Posttender planning; Tender document; Tender notice; Instruction to tender; Contract clauses/condition of
contract; Technical specifications of materials and works; Pre-qualification of contractors; Evaluation
and comparative statement; Contract agreement.
Sanitary Engineering (66472)
Course Conducted by
Md. Josim Uddin
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (7th Semester,Civil)

AIMS
 To be able to compare various methods and techniques used to treat and dispose of sewage and control of
water pollution and select appropriate methods for given situations.
 To be able to identify various sewer pipes, fittings, procedures of construction, repair, replacement
and maintenance of sewage disposal system.
 To be able to determine the size of circular sewer pipes, septic tanks and soak pit of sewage
disposal system.
 To be able to compare various types of pit latrine and biogas generating plants.
 To be able to understand the basic concept of solid waste and management.
 To be able to understand the basic concept of ETP

SHORT DESCRIPTION
Sewage; Sewer pipe; Sewer appurtenance; Flow in sewer; Construction of sewer; Maintenance of
sewer; Characteristics of sewage; Sewage disposal; Preliminary Sewage treatment system; Secondary
treatment system; Sludge treatment and disposal; Effluent Treatment Plant; Water pollution and its
effects on the environment; Rural sanitation; Health and hygiene; Generation of biogas; Sources and
classification of solid waste; Municipal and industrial solid waste; different steps of solid management.
Water Resources Engineering (66475)
Course Conducted by
Zayanta Chandra
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (7th Semester,Civil)

AIMS
• To provide understanding on the influence of the climatic condition of Bangladesh on its ground
water and surface water flow
• To provide understanding of recharging of underground water and ascertain its necessity in
Bangladesh.
• To enable to select a suitable source of water and method of irrigation for particular situation.
• To enable to select a suitable method of drainage for particular situation.
• To enable to select a suitable method for control of rivers and flood in Bangladesh.
• To understand rain water harvesting.

SHORT DESCRIPTION
Sources of water; Rainfall and run-off; Lifting of underground water; Storing and Recharging of
ground/rain water; Irrigation and its effect; Well irrigation; Water requirements for crops; and quality
of irrigation water; Storage reservoir; Dam and dyke; Irrigation canals; Silt deposit; Scouring; Canal
works; Drainage; River training works; Flood and flood management and flood control; Irrigation
projects in Bangladesh.
Mathematics-3 (Textile)
Course Conducted by
Farha Diba,
Sr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Textile Engineering
INSTRUMENTATION & PROCESS CONTROL
OBJECTIVES
Upon completion of these content student will be able to achieve and acquire knowledge, skills and
attitude in the area of instrumentation and process control with special emphasis on:
 Transducer
 Signal conditioning
 Recorders.
 Measuring techniques of special quantities
 Data acquisition
 Control theory
 Servo control
Construction Process-1(66433)
OBJECTIVES:

At the end of course the students will be able to:
 Apply relevant theory and practice of concrete construction and its quality control
methods.
 Perform skills for construction work and Its supervision.
 understand the process, techniques and materials used in different types of masonry.

SHORT DESCRIPTION
Concrete, Brick masonry, Composite masonry, Foundation, Partition wall, Cavity wall.
Civil Engineering Materials (66421)
AIMS
• To be able to identify and classify the materials used for construction in civil engineering field.
• To be able to recognize the sources of various civil engineering materials.
• To be able to understand the characteristics of various civil engineering materials.
• To be able to understand the uses of different civil engineering materials.

SHORT DESCRIPTION
Aspects of engineering materials; Engineering uses of Stone; Bricks; Sand; Cement; Timber ; Aluminum
as construction materials; Timber & Wood based materials ; Glass and ceramics; Paints and varnishes;
Plastic materials ; Alloy & Mattel; Insulating materials; Geo-Textile ; Lime and water proofing
materials.
Structural mechanics (66441)
AIMS:
• To enable to apply the knowledge of scientific principles to problems of mechanical nature.
• To develop an understanding of mechanical properties of materials.
• To assist in applying mathematical and geometrical calculations to the analysis of statically
determinate beams.

SHORT DESCRIPTION
Mechanical properties of material; Laws of forces; Moment; Friction; Centroid and centre of gravity;
Moment of inertia; Torsion on circular shaft; Shear force and bending moment.
Foundation engineering (66465)
AIMS
 To be able to understand the foundation and foundation engineering.
 To be able to understand the soil stabilization.
 To be able to understand and the bearing capacity of soil.
 To be able to understand the factors determining types of foundation.
 To be able to understand the foundation on sand and non-plastic soil, plastic soil, non-uniform soil,
rock.
 To be able to understand the excavating and bracing.
 To be able to understand the sheet pile wall, cofferdam and bulk head.
 To be able to understand the damages due to construction operations.

SHORT DESCRIPTION
Foundation and foundation engineering; Factors determining the types of foundation; Soil stabilization;
Bearing capacity of soil; Foundation on sand and non-plastic silt; Foundation on clay and plastic silt;
Foundation on non-uniform soil; Foundation on rock; Excavation and bracing; Sheet pile, cofferdam &
bulkhead; Damages due to construction operations.
Physics-1(5912)
To provide a foundation in scientific principals and processes for the understanding and application of technology. It will help our students to make a common base for further studies in technology and science. It also help to develop the basic knowledge of modern physics.
Wet Processing- 3
Course Conducted by
Rumana Rashid Tandra
Instructor (Textile & GDPM)
Daffodil Polytechnic Institute.
This Course for: Diploma in Textile Engineering
Electrical Appliance (66722)
OBJECTIVES
 To develop understanding and skill on the construction and operation of electrical appliances based on
heating principle.
 To develop understanding and skill on the construction and operation of appliances operated by electric
motor.
 To enable to acquire skill/competence in diagnosing/localizing faults and repairing & servicing of electrical
appliances.
SHORT DESCRIPTION
Electric iron; Electric heater; Rice cooker; Electric Kettle; Geyser; Electric fan; Rechargeable (Emergency)
lamp; Vacuum Cleaner; Blower; Dehumidifier; Blender; Washing machine; Refrigerator; Air conditioner;
Microwave oven
Certification icon
Transmission & Distribution of Electrical Power-1(66763)
Course Conducted By
Md.Shafikul Islam (Milon)
Head of the department
Electrical Technology.
Daffodil Polytechnic Institute

AIMS
My students will be able to acquire knowledge, skills and attitude in the area of transmission and distribution electrical power with special emphasizes on:
 Transmission and distribution systems of electrical power.
 Comparison of different types of transmission and distribution systems.
 Electrical and Mechanical design of overhead lines.
 Survey of transmission and distribution line routes.
 Voltage regulation and Efficiency of transmission lines.

SHORT DESCRIPTION

Different systems of transmission; Aspect of transmission system; Mechanical design of overhead lines; support of overhead lines; conductors & conductor materials; Insulators; Effect of sag; Methods for survey of transmission/distribution line route; Voltage distribution of suspension insulator; Corona; Erection of poles and drawing of conductors of overhead lines; Electrical design of overhead line; Resistance of the line conductor; Skin effect of transmission line; Effect of inductance on transmission line; Effect of capacitance of overhead transmission line; Voltage regulation and efficiency of short transmission line.

Certification icon
Telecommunication Fundamentals
Course Conducted By
MD. ARIF MIA
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 2nd Semester)
Objectives of the Course
After completion of the course students will be able to:

Basic Telephony (1G, 2G, 3G, 4G,LTE And UMTS)
o Wireless and Cellular/Mobile Radio
o Wi-MAX, Wi-Fi, VOIP, PCS
o Local and Long-Distance Communications
o Image Communications
o Transmission Media , Media Gateway Control Protocol
o Telephone switching
o Voice over Internet Protocol (VoIP) and VoIP Gateway
o Telephony and Telegraph system, (NWD, ISD and PSTN)
o Telecommunication standardization organization
o OSI Model
o Bangladesh Telecommunication Regulatory Commission , function , Acts, mission and vision of BTRC
Digital Electronics (66834)
Course Conducted By
MD. Shaif Anam
Instructor
Electrical Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (CMT 4th Semester)
Objectives of the Course
After completion of the course students will be able to:
You will get concept of digital electronics; Logic gates, Boolean algebra and logic simplification &Combinational logic circuits.
Wireless Communication & Networking
Course Conducted By
MD. ARIF MIA
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 6th Semester)
Objectives of the Course
After completion of the course students will be able to:
Introduction to Wireless communication, Modern wireless communication system, third generation(3G) wireless
network, fourth generation(4G) wireless network, cellular network, Amplitude Modulation(AM), Frequency
Modulation(FM), Linear Modulation technique, Constant envelope modulation technique, equalization, diversity
and channel coding, polarization diversity, frequency diversity, time diversity, different types of multiple access,
packet radio protocols, several types of wireless network, wireless system standard and 4th Industrial Revolutions.
Certification icon
Art of Living
Developed by:
Md. Sabur Khan &
Syed Mizanur Rahman
Daffodil International University
CAD-1 (68742)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 4th Semester)

Subject Aims:
After completion of the course students will be able to:
❖ Drawing environments and drawing aids.
❖ Different setup of drawing in Auto CAD.
❖ Drawing commands. • Modification & edits of drawing.
❖ Printing the drawing elements.

Subject Outcome:
● Student will know About Drawing environments and drawing aids.
● Can ensure different setup of drawing in Auto CAD.
● Learn about Drawing commands.
● Can be able to Modification & edits of drawing.
● Can Practice how to Print the drawing elements.

Air Conditioning & Acoustics(68764)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 6th Semester)

Subject Aims:
After completion of the course students will be able to:
❖ To be able to understand the fundamental of air condition.
❖ To be able to understand the construction procedure of air condition syste
m.
❖ To be able to understand the fundamental of architectural acoustics.
❖ To be able to prepare materials schedule, cost and development process.
Subject Outcome:
▪ Student will know about Materialsfor air conditioning system.
▪ Will learn the list of Acoustics materials.
▪ Can Design false ceiling.
▪ Knowing Aboutsound absorption.
▪ Can learn about auditorium acoustics etc.
▪ Can Estimate the Cooling & heating load after calculation. K, C, R & U factor.
▪ Will be able to design varioustypes of lighting
Interior Working Drawing-2 (68762)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 6th Semester)

Subject Outcome:
 To be able to understand
 The working drawing of residential building plan procedure,
 The working drawing of residential building furniture drawing procedure,
 The working drawing on kitchen & toilet with fixture & fittings,
 The working drawing of false ceiling,
 Wall partition
 Cabinet and floor and materials.

Basic Estimating & Costing (66447)
Introduction to estimating, Quantity estimation of excavating tank, road embankment, canal digging,
Steps, boundary wall, bituminous & RCC road, estimate of a single storied two-roomed building with
Verandah and double storied building, rate analysis.
Surveying -2
Leveling; Errors in leveling; Contouring; Theodolite traversing, Trigonometrical leveling and Topographic surveying.
TEXTILE TESTING & QUALITY CONTROL (5045)
CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute

Subject Aims:
Basic aspects of textile testing, humidity, moisture in textiles, sampling, identification of textile fibers, fiber length & its measurement, fiber strength & its measurement, Trash, naps & their measurement, fiber fineness &its measurement, micromere value, fiber maturity

Subject Outcome:
Students will be understood with an opportunity to acquire knowledge & skill about Testing,
Techniques & System of Testing. The operating system of different modern Testing instruments,
Interpretation & Analysis of testing data use & Maintenance of testing instruments.
Apparel Testing (5063)
Course Conducted by
Rumana Rashid Tandra
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in GDPM
Garments Manufacturing-3
Course Conducted by
Rumana Rashid Tandra,
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in GDPM Technology
Social Science 25811
Civic and Social Sciences; Individual and Society; Nation and Nationality; Citizenship; state and government; Law; Constitution Government and its organs;
public Opinion; Political Party; UNO And its organs; Scope and importance of Economics; Basic concepts of Economics- Utility, Wealth, consumption, income
wages and salary and savings; Production- meaning, nature, factors and laws; demand and supply; Current economic problems of Bangladesh; Role of Diploma
engineers in the economic development of Bangladesh; Occupations and career planning; Engineering team.
Interior Working Drawing -1(68752)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 5th Semester)

To be able to draw the working drawing of living room, dining room, bedroom.
To be able to draw the working drawing of kitchen, toilet.
To be able to draw the working drawing of a 2bedroom house.
To be able to draw the working drawing of door and window.
Mathematics-1 (All Technology)
Course Conducted by
S. M. Abul Kalam Azad
Instructor,
Daffodil Polytechnic Institute.

This Course for: Diploma in Engineering (1st Semester)
Course Aims:

To acquaint the students with the basic terminology of Algebra.
To be able to understand the complex numbers which are being used in electrical engineering.
To be able to understand the binomial expansion.
To be able to use the knowledge of trigonometry in solving problems of engineering importance.

Course Outcome:
Students will able to learn about Algebra and Trigonometry by studying this subject.
Detail discussions in Algebra will be: AP & GP, Polynomials & polynomial equations, Complex number, Permutation & Combination, Binomial
Theorem for positive integral index and negative & fractional index.
Detail discussions in Trigonometry will be: Ratio of associated angles, Compound angles, Transformation formulae, multiple angles and Submultiple angles.
Industrial Management (65852)
Industrial Management (65852)

* To be able to develop the working condition in the field of industrial or other organization.
* To be able to understand develop the labor management relation in the industrial sector.
* To be able to develop the management techniques in the process of decision making.
* To be able to manage the problems created by trade union.
* To be able to understand planning.
* To be able to perform the marketing.
* To able to maintain inventory.

 SHORT DESCRIPTION
Basic concept of management; Principles of management; planning, Organization, Scientific management; span of supervision; Motivation; Personal Management & human relation ; Staffing and manpower planning; Training of Staff; Concepts and techniques of decision making; Concept of Leadership; Concept of trade union; Inventory control; Economic lot size; Break even analysis; Trade Union and industrial dispute, Marketing.