All Courses
Specialized Garments Production (5073)
Protective clothing; Production of specialized garments; Microbial protections; Medical Textiles; Water repellent clothing; Proofing of garments; Water proofing; Fire proofing; Mildew Proofing; Moth Proofing
1 hour 35 minutes
15 steps
Garment Manufacturing-2
CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
2 hours 48 minutes
19 steps
Fabric Manufacturing 1 (21231)
CONDUCTED BY:
Asif Shahriar
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION
To develop basic knowledge regarding the preparatory process of fabric manufacture.
To develop the skill of the students, in the weaving preparatory process.
To familiarize the students, with different types of loom.
To provide skill on the basic concept of knitting.
SHORT DESCRIPTION OF BOOKS STUDIES:
The basic concept of fabric weaving processes like winding; Warping; Sizing; Denting & drafting; Read & heald count; Weaving; Power loom; Loom motion & basic idea of knitting
Asif Shahriar
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION
To develop basic knowledge regarding the preparatory process of fabric manufacture.
To develop the skill of the students, in the weaving preparatory process.
To familiarize the students, with different types of loom.
To provide skill on the basic concept of knitting.
SHORT DESCRIPTION OF BOOKS STUDIES:
The basic concept of fabric weaving processes like winding; Warping; Sizing; Denting & drafting; Read & heald count; Weaving; Power loom; Loom motion & basic idea of knitting
3 hours 41 minutes
14 steps
Yarn Manufacturing-1
CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
29 minutes
16 steps
Textile Testing & Quality Control- II
CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
1 hour 41 minutes
17 steps
Introduction to Textile Science
CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
14 minutes
14 steps
Advanced Short Staple Spinning (1972)
CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
1 hour 7 minutes
13 steps
Clothing-I (1954)
SHORT DESCRIPTION:
Garments; Garment accessories; Tailoring process; Pattern making; Marker; Cutting machines; Fabric spreading; Seam & sewing
Garments; Garment accessories; Tailoring process; Pattern making; Marker; Cutting machines; Fabric spreading; Seam & sewing
1 hour 48 minutes
15 steps
Fabric Manufacturing-2 (21241)
CONDUCTED BY:
Md.Ashikur Rahman
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
SHORT DESCRIPTION:
Shed; Shedding mechanism; Tappet; Top roller mounting; Picking; Beating up; Take up motion, Let off motion & basic idea of knitting
Md.Ashikur Rahman
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
SHORT DESCRIPTION:
Shed; Shedding mechanism; Tappet; Top roller mounting; Picking; Beating up; Take up motion, Let off motion & basic idea of knitting
1 hour 35 minutes
34 steps
Clothing II (1962)
CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION OF THIS COURSE:
• Our student will develop understanding and skill on operating different sewing machine. sewing of garments by using different types of sewing machine
• Our student can operating different sewing machine.
• Our student can get knowledge of different work aid of sewing machine.
• Our student can get knowledge of Interlining.
• Our student can get knowledge of Garments Finishing.
• Our student can get knowledge of care level code.
After completing the Course student will have knowledge about different sewing machine, sewing of garments by using different types of sewing machine, knowledge of different work aid of sewing machine, Interlining, Garments finishing & Garments care level code.
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION OF THIS COURSE:
• Our student will develop understanding and skill on operating different sewing machine. sewing of garments by using different types of sewing machine
• Our student can operating different sewing machine.
• Our student can get knowledge of different work aid of sewing machine.
• Our student can get knowledge of Interlining.
• Our student can get knowledge of Garments Finishing.
• Our student can get knowledge of care level code.
After completing the Course student will have knowledge about different sewing machine, sewing of garments by using different types of sewing machine, knowledge of different work aid of sewing machine, Interlining, Garments finishing & Garments care level code.
1 hour 18 minutes
8 steps
Advanced Knitting & Non Woven (1975)
Scouring; Souring; Bleaching; color & concept of color; Dye & dyeing; Direct dyes; Basic dyes; Acid dyes; Vat dyes and Reactive dyes.
5 hours 20 minutes
25 steps
Textile Calculation-2 (1977)
CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
INTENTION
To develop the basic knowledge to calculate :
a) Winding b) Warping
c) Sizing d) Loom and knitting production.
e) Read count and heald count. f) Fabric calculation
g) Fabric requirement in garment. h) Sewing thread consumption
i) Costing j) Gearing Calculation
SHORT DESCRIPTION:
Calculation of winding; Calculation of warping; Calculation of sizing;Calculation of heald count and Reed count; Calculation of loom and
knitting productions,Cloth calculation; Calculation of cloth requirement in garments; Sewing thread consumption & costing.
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
INTENTION
To develop the basic knowledge to calculate :
a) Winding b) Warping
c) Sizing d) Loom and knitting production.
e) Read count and heald count. f) Fabric calculation
g) Fabric requirement in garment. h) Sewing thread consumption
i) Costing j) Gearing Calculation
SHORT DESCRIPTION:
Calculation of winding; Calculation of warping; Calculation of sizing;Calculation of heald count and Reed count; Calculation of loom and
knitting productions,Cloth calculation; Calculation of cloth requirement in garments; Sewing thread consumption & costing.
2 hours 38 minutes
14 steps
Fabric Structure Design & Color (5055)
CONDUCTED BY:
Md. Ashikur Rahman
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
INTENTION :
To provide the student with an opportunity to acquire knowledge, skill and attitude in the area of fabric structure and cloth analysis with special emphasis on:
● Fabrics design
● Fabrics construction
● Fabrics drafting & lifting plan
● Analysis of cloth
SHORT DESCRIPTION
Basic Concepts of textile design and artistic design; Drafting and lifting. Weaving structure; Plan weave; Twill weave; Satin and sateen weave; Ornamentation of fabrics design; Figuring with extra threads; Double cloth Backed cloth; Leno weave; Velvet; Terry; and Analysis of cloth.
Md. Ashikur Rahman
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
INTENTION :
To provide the student with an opportunity to acquire knowledge, skill and attitude in the area of fabric structure and cloth analysis with special emphasis on:
● Fabrics design
● Fabrics construction
● Fabrics drafting & lifting plan
● Analysis of cloth
SHORT DESCRIPTION
Basic Concepts of textile design and artistic design; Drafting and lifting. Weaving structure; Plan weave; Twill weave; Satin and sateen weave; Ornamentation of fabrics design; Figuring with extra threads; Double cloth Backed cloth; Leno weave; Velvet; Terry; and Analysis of cloth.
34 minutes
9 steps
Garments Dyeing Washing and Finishing (5072)
CONDUCTED BY:
MD.ASFAKUR RAHMAN
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
INTENTION:
To be able to develop knowledge, skill and attitude in the area of garments dyeing, washing and finishing with special emphasis on:
garments dyeing, steaming & drying
garments washing and finishing
enzyme, De-Lusturing and brightening finish of garments
drying machine and ironing of garments.
SHORT DESCRIPTION
Garments washing; Stone wash; Chemical wash; Garments finishing; Enzyme finish; De-Lusturing finishing of garments; Brightening finish of garments; Garments dyeing; Steam of garments; Drying machine; Ironing of garments.
MD.ASFAKUR RAHMAN
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
INTENTION:
To be able to develop knowledge, skill and attitude in the area of garments dyeing, washing and finishing with special emphasis on:
garments dyeing, steaming & drying
garments washing and finishing
enzyme, De-Lusturing and brightening finish of garments
drying machine and ironing of garments.
SHORT DESCRIPTION
Garments washing; Stone wash; Chemical wash; Garments finishing; Enzyme finish; De-Lusturing finishing of garments; Brightening finish of garments; Garments dyeing; Steam of garments; Drying machine; Ironing of garments.
57 minutes
10 steps
Printing & Finishing Process (5054)
CONDUCTED BY:
MD.ASFAKUR RAHMAN
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
INTENTION :
To be able to develop knowledge, skill and attitude in the field of printing and finishing process with special emphasis on:
printing, printing paste and ingredients
printing thickness and printing machinery
method and style of printing
ageing and steaming
printing and finishing
sunforising and calendaring.
SHORT DESCRIPTION
Printing; Printing paste and ingredients; Printing thickness; Methods and styles of printing; Printing machinery; Ageing and steaming; Printing of cellulose fabric; Printing of wool and silk fabrics; Printing with disperse dye; Printing with pigments; Textile finishing; Sunforising; Calendering and Anti creasing.
MD.ASFAKUR RAHMAN
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
INTENTION :
To be able to develop knowledge, skill and attitude in the field of printing and finishing process with special emphasis on:
printing, printing paste and ingredients
printing thickness and printing machinery
method and style of printing
ageing and steaming
printing and finishing
sunforising and calendaring.
SHORT DESCRIPTION
Printing; Printing paste and ingredients; Printing thickness; Methods and styles of printing; Printing machinery; Ageing and steaming; Printing of cellulose fabric; Printing of wool and silk fabrics; Printing with disperse dye; Printing with pigments; Textile finishing; Sunforising; Calendering and Anti creasing.
32 minutes
11 steps
Construction Process-2(66451)
Course Conducted by
Md.Josim Uddin.
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester Civil)
AIMS
After completion of the course the students will be able to:
Understand the construction process of arch and lintel.
Understand the construction process of different types of floor.
Understand the construction process of stairs.
Understand the construction process of different types of roof.
Understand the different finishing works in building.
Understand the construction process of doors and windows.
Understand the different operation and maintenance construction equipment.
Understand the construction of bridge, culvert, canals etc.
SHORT DESCRIPTION
Arches; Lintels; Ground floors; Upper floors; Damp proofing; Termite treatment; Stairs; Roof; Pitched
roof; Plastering and pointing; Doors; Windows; Carpentry and joinery; Scaffolding; Form works, Pointing
& Varnishing, construction equipment, Building Services, Insulation, bridge/culverts and canals etc.
Md.Josim Uddin.
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester Civil)
AIMS
After completion of the course the students will be able to:
Understand the construction process of arch and lintel.
Understand the construction process of different types of floor.
Understand the construction process of stairs.
Understand the construction process of different types of roof.
Understand the different finishing works in building.
Understand the construction process of doors and windows.
Understand the different operation and maintenance construction equipment.
Understand the construction of bridge, culvert, canals etc.
SHORT DESCRIPTION
Arches; Lintels; Ground floors; Upper floors; Damp proofing; Termite treatment; Stairs; Roof; Pitched
roof; Plastering and pointing; Doors; Windows; Carpentry and joinery; Scaffolding; Form works, Pointing
& Varnishing, construction equipment, Building Services, Insulation, bridge/culverts and canals etc.
2 hours 15 minutes
6 steps
Sanitary Engineering (66472)
Course Conducted by
Md. Josim Uddin
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (7th Semester,Civil)
AIMS
To be able to compare various methods and techniques used to treat and dispose of sewage and control of
water pollution and select appropriate methods for given situations.
To be able to identify various sewer pipes, fittings, procedures of construction, repair, replacement
and maintenance of sewage disposal system.
To be able to determine the size of circular sewer pipes, septic tanks and soak pit of sewage
disposal system.
To be able to compare various types of pit latrine and biogas generating plants.
To be able to understand the basic concept of solid waste and management.
To be able to understand the basic concept of ETP
SHORT DESCRIPTION
Sewage; Sewer pipe; Sewer appurtenance; Flow in sewer; Construction of sewer; Maintenance of
sewer; Characteristics of sewage; Sewage disposal; Preliminary Sewage treatment system; Secondary
treatment system; Sludge treatment and disposal; Effluent Treatment Plant; Water pollution and its
effects on the environment; Rural sanitation; Health and hygiene; Generation of biogas; Sources and
classification of solid waste; Municipal and industrial solid waste; different steps of solid management.
Md. Josim Uddin
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (7th Semester,Civil)
AIMS
To be able to compare various methods and techniques used to treat and dispose of sewage and control of
water pollution and select appropriate methods for given situations.
To be able to identify various sewer pipes, fittings, procedures of construction, repair, replacement
and maintenance of sewage disposal system.
To be able to determine the size of circular sewer pipes, septic tanks and soak pit of sewage
disposal system.
To be able to compare various types of pit latrine and biogas generating plants.
To be able to understand the basic concept of solid waste and management.
To be able to understand the basic concept of ETP
SHORT DESCRIPTION
Sewage; Sewer pipe; Sewer appurtenance; Flow in sewer; Construction of sewer; Maintenance of
sewer; Characteristics of sewage; Sewage disposal; Preliminary Sewage treatment system; Secondary
treatment system; Sludge treatment and disposal; Effluent Treatment Plant; Water pollution and its
effects on the environment; Rural sanitation; Health and hygiene; Generation of biogas; Sources and
classification of solid waste; Municipal and industrial solid waste; different steps of solid management.
7 steps
Fabric Structure and Analysis-01 (1966)
Course Created By
Asif Shahriar
Instructor, Textile & GDPM
Daffodil Polytechnic Institute
AIMS :
● To develop the basic knowledge required for structural design of fabric.
● To develop the skill of the student in textile design.
● To familiarize the student with different Plain & Twill weave.
● To acquire knowledge of different structured fabrics.
SHORT DESCRIPTION :
Basic concept of Textile design; Artistic design; Drafting & lifting plan; Weave plan; Plain weave; Twill weave; Diamond; Diaper; Broken twill; Stepped twill & standard commercial fabrics.
Asif Shahriar
Instructor, Textile & GDPM
Daffodil Polytechnic Institute
AIMS :
● To develop the basic knowledge required for structural design of fabric.
● To develop the skill of the student in textile design.
● To familiarize the student with different Plain & Twill weave.
● To acquire knowledge of different structured fabrics.
SHORT DESCRIPTION :
Basic concept of Textile design; Artistic design; Drafting & lifting plan; Weave plan; Plain weave; Twill weave; Diamond; Diaper; Broken twill; Stepped twill & standard commercial fabrics.
4 hours 59 minutes
29 steps
Textile Design & Color - 1973
Course Created By
Md. Ashikur Rahman
Instructor, Textile & GDPM
Daffodil Polytechnic Institute
AIMS :
1. To familiarize the students with the drawing instrument and their uses.
2. To develop the skill of the student in making designs.
3. To give the students a clear concept about light and color.
4. To familiarize with color and weave effects.
5. The students able to develop knowledge, skill and attitude in the area of Textile design and color.
SHORT DESCRIPTION
Basic concept of drawing instruments and their uses; Designing; Motif and repeat of a design; Construction of design from incomplete repeats; Light and color phenomena; Theory of color; Color harmony and contrast of color; Color and weave effect; Check-stripe and shaded design.
Md. Ashikur Rahman
Instructor, Textile & GDPM
Daffodil Polytechnic Institute
AIMS :
1. To familiarize the students with the drawing instrument and their uses.
2. To develop the skill of the student in making designs.
3. To give the students a clear concept about light and color.
4. To familiarize with color and weave effects.
5. The students able to develop knowledge, skill and attitude in the area of Textile design and color.
SHORT DESCRIPTION
Basic concept of drawing instruments and their uses; Designing; Motif and repeat of a design; Construction of design from incomplete repeats; Light and color phenomena; Theory of color; Color harmony and contrast of color; Color and weave effect; Check-stripe and shaded design.
1 hour 42 minutes
18 steps
Yarn Manufacturing 3 (1951)
CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
AIMS
To enable the students with an opportunity to acquire knowledge, skill and attitude in the area of yarn manufacturing with special emphasis on
• Roving Frame/Speed frame/Simplex
• Ring frame
• Conditioning
• Winding
• Reeling
• Bundling and baling
• Waste
SHORT DESCRIPTION
The basic concept of ring-spinning frame; Component parts of the ring-spinning frame; Drafting and roller setting; Ring, traveler & spindle of ring-spinning frame; Faults, change places and waste in spinning; Conditioning of yarn; Winding; Reeling; Bundling and baling; jute spinning frame; Draft & Twist of spinning frame; Building & winding; Technical aspects of spinning frame; Waste in cotton spinning.
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
AIMS
To enable the students with an opportunity to acquire knowledge, skill and attitude in the area of yarn manufacturing with special emphasis on
• Roving Frame/Speed frame/Simplex
• Ring frame
• Conditioning
• Winding
• Reeling
• Bundling and baling
• Waste
SHORT DESCRIPTION
The basic concept of ring-spinning frame; Component parts of the ring-spinning frame; Drafting and roller setting; Ring, traveler & spindle of ring-spinning frame; Faults, change places and waste in spinning; Conditioning of yarn; Winding; Reeling; Bundling and baling; jute spinning frame; Draft & Twist of spinning frame; Building & winding; Technical aspects of spinning frame; Waste in cotton spinning.
29 minutes
19 steps
Fabric Manufacturing 3 (1952)
CONDUCTED BY:
Md.Ashikur Rahman
Department of Textile Engineering
Daffodil Polytechnic Institute
Subject Aims:
1. To develop the basic knowledge regarding Fabric manufacturing
2. To develop knowledge & skill about different motions
3. To acquire knowledge to make different fabric shedding mechanisms, stop motion
Subject Outcome:1. To know the process of fabric manufacturing
2. Understand properly the process of stop motions, and shedding mechanisms.
Md.Ashikur Rahman
Department of Textile Engineering
Daffodil Polytechnic Institute
Subject Aims:
1. To develop the basic knowledge regarding Fabric manufacturing
2. To develop knowledge & skill about different motions
3. To acquire knowledge to make different fabric shedding mechanisms, stop motion
Subject Outcome:1. To know the process of fabric manufacturing
2. Understand properly the process of stop motions, and shedding mechanisms.
6 hours 19 minutes
26 steps
Production Planning & Control (7074)
CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION
1. To develop the basic knowledge regarding production control
2. To develop knowledge & skill about different planning
3. To acquire knowledge to make different inventory control
4. To acquire knowledge to know different production calculation
SHORT DESCRIPTION ABOUT BOOKS STUDIES:
Production system; division of labor; production planning; localization of industry; time study and motion study; selection of factory site; factory building; plant layout; equipment layout; operation of the factory; production control; quality control; cost control; inventory control; materials handling; case study.
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION
1. To develop the basic knowledge regarding production control
2. To develop knowledge & skill about different planning
3. To acquire knowledge to make different inventory control
4. To acquire knowledge to know different production calculation
SHORT DESCRIPTION ABOUT BOOKS STUDIES:
Production system; division of labor; production planning; localization of industry; time study and motion study; selection of factory site; factory building; plant layout; equipment layout; operation of the factory; production control; quality control; cost control; inventory control; materials handling; case study.
47 minutes
27 steps
Construction Process-1(26433)
Rationale:
Construction process-I is the pre-requisite of Construction process-II. Civil Engineering diploma graduates have to supervise construction of various project works involving use of various construction work based on quality. It does have physical parts with which we can make an appropriate shelter, service for the client to use it. So, to know how to build a construction project, one must know about Concrete, its types, properties, use of concrete, brick masonry, block masonry, different type of partition wall, drywall etc. This set of knowledge and skill to gives confidence to understand and construct a project. The students should have requisite knowledge regarding characteristics, uses and availability of various building item of work for construction purposes. In addition, specifications of various materials should also be known (BNBC/PWD) for effective quality control. To perform above task, it is essential that students should have knowledge of various item of work like concrete, masonry, block masonry, partition wall etc., and their constructional details. Therefore, the subject of Construction Process-I is very important for Civil Engineering diploma Graduates.
Construction process-I is the pre-requisite of Construction process-II. Civil Engineering diploma graduates have to supervise construction of various project works involving use of various construction work based on quality. It does have physical parts with which we can make an appropriate shelter, service for the client to use it. So, to know how to build a construction project, one must know about Concrete, its types, properties, use of concrete, brick masonry, block masonry, different type of partition wall, drywall etc. This set of knowledge and skill to gives confidence to understand and construct a project. The students should have requisite knowledge regarding characteristics, uses and availability of various building item of work for construction purposes. In addition, specifications of various materials should also be known (BNBC/PWD) for effective quality control. To perform above task, it is essential that students should have knowledge of various item of work like concrete, masonry, block masonry, partition wall etc., and their constructional details. Therefore, the subject of Construction Process-I is very important for Civil Engineering diploma Graduates.
6 hours 7 minutes
16 steps
Foundation Engineering (26451)
AIMS
To be able to understand the foundation and foundation engineering.
To be able to understand the soil stabilization.
To be able to understand and the bearing capacity of soil.
To be able to understand the factors determining types of foundation.
To be able to understand the foundation on sand and non-plastic soil, plastic soil, non-uniform soil,
rock.
To be able to understand the excavating and bracing.
To be able to understand the sheet pile wall, cofferdam and bulk head.
To be able to understand the damages due to construction operations.
SHORT DESCRIPTION
Foundation and foundation engineering; Factors determining the types of foundation; Soil stabilization;
Bearing capacity of soil; Foundation on sand and non-plastic silt; Foundation on clay and plastic silt;
Foundation on non-uniform soil; Foundation on rock; Excavation and bracing; Sheet pile, cofferdam &
bulkhead; Damages due to construction operations.
To be able to understand the foundation and foundation engineering.
To be able to understand the soil stabilization.
To be able to understand and the bearing capacity of soil.
To be able to understand the factors determining types of foundation.
To be able to understand the foundation on sand and non-plastic soil, plastic soil, non-uniform soil,
rock.
To be able to understand the excavating and bracing.
To be able to understand the sheet pile wall, cofferdam and bulk head.
To be able to understand the damages due to construction operations.
SHORT DESCRIPTION
Foundation and foundation engineering; Factors determining the types of foundation; Soil stabilization;
Bearing capacity of soil; Foundation on sand and non-plastic silt; Foundation on clay and plastic silt;
Foundation on non-uniform soil; Foundation on rock; Excavation and bracing; Sheet pile, cofferdam &
bulkhead; Damages due to construction operations.
27 minutes
15 steps
Fundamental Construction Process-66446
OBJECTIVES:
At the end of course the students will be able to:
apply relevant theory and practice of concrete construction and its quality control methods.
perform skills for construction work and its supervision.
understand the process, techniques and materials used in different types of masonry, Floor, Doors &
Windows.
SHORT DESCRIPTION
Concrete, Brick masonry, Foundation, Painting & varnishing, Insulation, Floor, Doors, Windows.
At the end of course the students will be able to:
apply relevant theory and practice of concrete construction and its quality control methods.
perform skills for construction work and its supervision.
understand the process, techniques and materials used in different types of masonry, Floor, Doors &
Windows.
SHORT DESCRIPTION
Concrete, Brick masonry, Foundation, Painting & varnishing, Insulation, Floor, Doors, Windows.
25 minutes
13 steps
1964 Textile Calculation -1
CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
To develop basic knowledge of calculation about cotton spinning such as-
a) Blow room
b) Carding
c) Draw frame
d) Simplex
e) Ring frame.
To develop basic knowledge of calculation about different yarn numbering system & moisture relative of textiles.
SHORT DESCRIPTION:
Blow room calculation; Carding calculation; Drawing calculation; Simplex calculation; Ring frame calculation & calculation of yarn numbering.
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
To develop basic knowledge of calculation about cotton spinning such as-
a) Blow room
b) Carding
c) Draw frame
d) Simplex
e) Ring frame.
To develop basic knowledge of calculation about different yarn numbering system & moisture relative of textiles.
SHORT DESCRIPTION:
Blow room calculation; Carding calculation; Drawing calculation; Simplex calculation; Ring frame calculation & calculation of yarn numbering.
2 hours 1 minute
54 steps
Sewing Practices (5022)
CONDUCTED BY:
MD.ASFAKUR RAHMAN
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
AIMS
To provide the students with an opportunity to develop knowledge, skill and attitude in the area of sewing practice with special emphasis on:
sewing needles and machines
stitch and seam
feed mechanism of sewing.
SHORT DESCRIPTION
Sewing needles; Sewing machines; Stitch; Seam and Feed mechanism of sewing.
MD.ASFAKUR RAHMAN
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
AIMS
To provide the students with an opportunity to develop knowledge, skill and attitude in the area of sewing practice with special emphasis on:
sewing needles and machines
stitch and seam
feed mechanism of sewing.
SHORT DESCRIPTION
Sewing needles; Sewing machines; Stitch; Seam and Feed mechanism of sewing.
39 minutes
15 steps
Clothing 1 (1954)
CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
AIMS
To enable the student a clear idea of garments.
To develop basic knowledge and skill of garment cloth.
To develop basic knowledge of garment accessories.
SHORT DESCRIPTION:
Garments; Garment accessories; Tailoring process; Patternmaking; Marker; Cutting machines; Fabric spreading; Seam & sewing.
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
AIMS
To enable the student a clear idea of garments.
To develop basic knowledge and skill of garment cloth.
To develop basic knowledge of garment accessories.
SHORT DESCRIPTION:
Garments; Garment accessories; Tailoring process; Patternmaking; Marker; Cutting machines; Fabric spreading; Seam & sewing.
38 minutes
11 steps
General Textile Processing-I (21111)
CONDUCTED BY:
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute
After undergoing the subject, students will be able to:
Identify machineries of cotton and jute yarn manufacturing.
Identify process sequence for cotton and jute fibers.
Identify grading, batch, batching, emulsion preparation and softening for jute yarn manufacturing.
Determine winding packages.
Identify warp beams.
Demonstrate power looms.
Identify maintenance tools and their uses.
Observe machine gears
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute
After undergoing the subject, students will be able to:
Identify machineries of cotton and jute yarn manufacturing.
Identify process sequence for cotton and jute fibers.
Identify grading, batch, batching, emulsion preparation and softening for jute yarn manufacturing.
Determine winding packages.
Identify warp beams.
Demonstrate power looms.
Identify maintenance tools and their uses.
Observe machine gears
3 steps
Textile Testing & Quality Control- 1 (1944)
CONDUCTED BY:
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute
Subject Aims:
Basic aspects of textile testing, humidity, moisture in textiles, sampling, identification of textile fibers, fiber length & its measurement, fiber strength & its measurement, Trash, naps & their measurement, fiber fineness &its measurement, micromere value, fiber maturity
Subject Outcome:
Students will be understood with an opportunity to acquire knowledge & skill about Testing,
Techniques & System of Testing. Operating system of different modern Testing instruments,
Interpretation & Analysis of testing data uses & Maintenance of testing instruments.
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute
Subject Aims:
Basic aspects of textile testing, humidity, moisture in textiles, sampling, identification of textile fibers, fiber length & its measurement, fiber strength & its measurement, Trash, naps & their measurement, fiber fineness &its measurement, micromere value, fiber maturity
Subject Outcome:
Students will be understood with an opportunity to acquire knowledge & skill about Testing,
Techniques & System of Testing. Operating system of different modern Testing instruments,
Interpretation & Analysis of testing data uses & Maintenance of testing instruments.
4 steps
Natural Textile Fiber(3rd Textile)
CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
5 hours 17 minutes
14 steps
Fabric Manufacturing-II(5051)
Conduct By
Sabina Yasmin
Instructor
Department of Textile & GDPM
Daffodil Polytechnic Institute
Sabina Yasmin
Instructor
Department of Textile & GDPM
Daffodil Polytechnic Institute
4 hours 56 minutes
15 steps
(21141)Man Made Fiber & Filament
Conducted By:
Sabina Yasmin koli
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
After undergoing the subject, students will be able to:
Explain Man-Made Fibre manufacturing process.
Explain Regenerated Cellulosic Fiber manufacturing process.
Identify problem during production.
Provide effective solution during production.
Explain High-performance Man-Made Fibre.
Illustrate recycling process and sustainability of Man-Made Fibre
Sabina Yasmin koli
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
After undergoing the subject, students will be able to:
Explain Man-Made Fibre manufacturing process.
Explain Regenerated Cellulosic Fiber manufacturing process.
Identify problem during production.
Provide effective solution during production.
Explain High-performance Man-Made Fibre.
Illustrate recycling process and sustainability of Man-Made Fibre
2 hours 35 minutes
8 steps
Yarn Manufacturing-II (21142)
Conducted By:
Sabina Yasmin koli
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Sabina Yasmin koli
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
2 hours 14 minutes
5 steps
Hydrology (26446)
1. Rationale: Hydrology is an extremely important field of study, dealing with one of the most valuable resources on Earth water. All aspects of the Earth's available water are studied by experts from many disciplines, from geologists to civil engineers, to obtain the information needed to manage this vital resource. Thus, considering the importance above mentioned, this discipline has been included in the diploma level as a subject to be graduate in the sector. The syllabus includes concept of engineering hydrology, hydrology cycle, hydrometeorology, introduction to precipitation, measurement of precipitation, analysis and interpretation of rainfall data, stream flow measurement, evaporation and evapotranspiration, infiltration, rainfall and runoff relationship, hydrograph analysis and flood routing modules/contents, blue economy and Delta plan in Bangladesh to be studied in the teaching learning process.
2. Learning outcome (Theoretical): After undergoing the subject, students will be able to
Describe origin, composition, classification and properties of soil.
State plasticity characteristics of soil.
Define hydraulic properties of soil.
Describe consolidation and compaction characteristics of soil.
Define lateral earth pressure of soil.
Describe subsurface investigation and method of sample collection.
Calculate the bearing capacity of soil.
3. Learning outcome (Practical): After undergoing the subject, students will be able to
Determine the water content of soil by oven drying method.
Determine the specific gravity of soil by Pycnometer method.
Determine the particle size of soil by sieve analysis method.
Determine the liquid limit and plastic limit of soil.
Perform the co-efficient of permeability of soil by constant head test.
Determine the bearing capacity of soil from Standard Penetration Test (SPT).
Perform standard proctor test of the soil.
Perform unconfined compression test of the soil.
Perform unit weight of soil by core cutter method.
Perform unit weight of soil by sand replacement method.
2. Learning outcome (Theoretical): After undergoing the subject, students will be able to
Describe origin, composition, classification and properties of soil.
State plasticity characteristics of soil.
Define hydraulic properties of soil.
Describe consolidation and compaction characteristics of soil.
Define lateral earth pressure of soil.
Describe subsurface investigation and method of sample collection.
Calculate the bearing capacity of soil.
3. Learning outcome (Practical): After undergoing the subject, students will be able to
Determine the water content of soil by oven drying method.
Determine the specific gravity of soil by Pycnometer method.
Determine the particle size of soil by sieve analysis method.
Determine the liquid limit and plastic limit of soil.
Perform the co-efficient of permeability of soil by constant head test.
Determine the bearing capacity of soil from Standard Penetration Test (SPT).
Perform standard proctor test of the soil.
Perform unconfined compression test of the soil.
Perform unit weight of soil by core cutter method.
Perform unit weight of soil by sand replacement method.
6 steps
New Content
Textile Testing & Quality Control- 1 (21151)
CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
7 hours 57 minutes
26 steps
New Content
Garments CAD & CAM-II
CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
1 hour 44 minutes
9 steps