All Courses
Apparel Merchandising
CONDUCTED BY:
Rumana Rashid Tandra
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
AIMS
To be able to understand the garments export and import management.
To be able to develop knowledge of export costing and pricing.
To be able acquire knowledge of garments export and import procedure.
To be able to understand the export documentation and export marketing communication.
SHORT DESCRIPTION
International trade theory; Export management; Category and quota of different
woven garments; Export business environment; Export policy decision of a firm;
Export costing and export pricing; Export finance; Export procedure; Export
documentation; Export marketing communication; Advantages of garments
export; Import procedure.
Rumana Rashid Tandra
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
AIMS
To be able to understand the garments export and import management.
To be able to develop knowledge of export costing and pricing.
To be able acquire knowledge of garments export and import procedure.
To be able to understand the export documentation and export marketing communication.
SHORT DESCRIPTION
International trade theory; Export management; Category and quota of different
woven garments; Export business environment; Export policy decision of a firm;
Export costing and export pricing; Export finance; Export procedure; Export
documentation; Export marketing communication; Advantages of garments
export; Import procedure.
3 hours 40 minutes
20 steps
Garment Manufacturing-2
CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
2 hours 48 minutes
19 steps
Fabric Manufacturing 1 (21231)
CONDUCTED BY:
Asif Shahriar
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION
To develop basic knowledge regarding the preparatory process of fabric manufacture.
To develop the skill of the students, in the weaving preparatory process.
To familiarize the students, with different types of loom.
To provide skill on the basic concept of knitting.
SHORT DESCRIPTION OF BOOKS STUDIES:
The basic concept of fabric weaving processes like winding; Warping; Sizing; Denting & drafting; Read & heald count; Weaving; Power loom; Loom motion & basic idea of knitting
Asif Shahriar
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION
To develop basic knowledge regarding the preparatory process of fabric manufacture.
To develop the skill of the students, in the weaving preparatory process.
To familiarize the students, with different types of loom.
To provide skill on the basic concept of knitting.
SHORT DESCRIPTION OF BOOKS STUDIES:
The basic concept of fabric weaving processes like winding; Warping; Sizing; Denting & drafting; Read & heald count; Weaving; Power loom; Loom motion & basic idea of knitting
3 hours 41 minutes
14 steps
Textile Testing & Quality Control- II
CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
1 hour 41 minutes
17 steps
Clothing II (1962)
CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION OF THIS COURSE:
• Our student will develop understanding and skill on operating different sewing machine. sewing of garments by using different types of sewing machine
• Our student can operating different sewing machine.
• Our student can get knowledge of different work aid of sewing machine.
• Our student can get knowledge of Interlining.
• Our student can get knowledge of Garments Finishing.
• Our student can get knowledge of care level code.
After completing the Course student will have knowledge about different sewing machine, sewing of garments by using different types of sewing machine, knowledge of different work aid of sewing machine, Interlining, Garments finishing & Garments care level code.
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION OF THIS COURSE:
• Our student will develop understanding and skill on operating different sewing machine. sewing of garments by using different types of sewing machine
• Our student can operating different sewing machine.
• Our student can get knowledge of different work aid of sewing machine.
• Our student can get knowledge of Interlining.
• Our student can get knowledge of Garments Finishing.
• Our student can get knowledge of care level code.
After completing the Course student will have knowledge about different sewing machine, sewing of garments by using different types of sewing machine, knowledge of different work aid of sewing machine, Interlining, Garments finishing & Garments care level code.
1 hour 18 minutes
8 steps
Theory of Structure [66454]
Subject Teacher : Md. Zahidul Isam, Jr. Instructor
Subject Name : Theory of Structure
Subject Code : 66454
Technology : Architecture
Semester :6th
AIMS
• To be able to consolidate and extend the fundamental understanding of the behavior of statically
determinate structures i.e. beams, frames etc.
• To be able to develop of awareness of structural behavior such as deflection and stability of
masonry dam.
• To be able to develop understanding for selection of suitable section of beam and member of the
truss.
SHORT DESCRIPTION
Shear force and bending moment of beams; Stresses in beams; Deflection of beams; Joints and
connections; Forces in frames; Steel structure; Masonry dam; Column; Moving loads; Thin Cylindrical
shells.
Subject Name : Theory of Structure
Subject Code : 66454
Technology : Architecture
Semester :6th
AIMS
• To be able to consolidate and extend the fundamental understanding of the behavior of statically
determinate structures i.e. beams, frames etc.
• To be able to develop of awareness of structural behavior such as deflection and stability of
masonry dam.
• To be able to develop understanding for selection of suitable section of beam and member of the
truss.
SHORT DESCRIPTION
Shear force and bending moment of beams; Stresses in beams; Deflection of beams; Joints and
connections; Forces in frames; Steel structure; Masonry dam; Column; Moving loads; Thin Cylindrical
shells.
7 hours 29 minutes
16 steps
Telecommunication Basic(69411)
Telecommunication Basic(69411)
This created by
Abdur Rahman
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
Telecommunication and its background; Terms of Communication; Signals and Systems; Communication
Frequency and Spectra; Modulation and Demodulation; Multiplexing/ De-multiplexing; Multiple Access
Techniques; Radio transmitter; Radio receiver; Network; Internet.
This created by
Abdur Rahman
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
Telecommunication and its background; Terms of Communication; Signals and Systems; Communication
Frequency and Spectra; Modulation and Demodulation; Multiplexing/ De-multiplexing; Multiple Access
Techniques; Radio transmitter; Radio receiver; Network; Internet.
6 steps
Yarn Manufacturing 3 (1951)
CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
AIMS
To enable the students with an opportunity to acquire knowledge, skill and attitude in the area of yarn manufacturing with special emphasis on
• Roving Frame/Speed frame/Simplex
• Ring frame
• Conditioning
• Winding
• Reeling
• Bundling and baling
• Waste
SHORT DESCRIPTION
The basic concept of ring-spinning frame; Component parts of the ring-spinning frame; Drafting and roller setting; Ring, traveler & spindle of ring-spinning frame; Faults, change places and waste in spinning; Conditioning of yarn; Winding; Reeling; Bundling and baling; jute spinning frame; Draft & Twist of spinning frame; Building & winding; Technical aspects of spinning frame; Waste in cotton spinning.
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
AIMS
To enable the students with an opportunity to acquire knowledge, skill and attitude in the area of yarn manufacturing with special emphasis on
• Roving Frame/Speed frame/Simplex
• Ring frame
• Conditioning
• Winding
• Reeling
• Bundling and baling
• Waste
SHORT DESCRIPTION
The basic concept of ring-spinning frame; Component parts of the ring-spinning frame; Drafting and roller setting; Ring, traveler & spindle of ring-spinning frame; Faults, change places and waste in spinning; Conditioning of yarn; Winding; Reeling; Bundling and baling; jute spinning frame; Draft & Twist of spinning frame; Building & winding; Technical aspects of spinning frame; Waste in cotton spinning.
29 minutes
19 steps
Digital Communication(69451)
Digital Communication(69451)
This created by
Abdur Rahman
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
Introduction to digital communication, modulation technique; Pulse modulation; Pulse amplitude
modulation; Pulse width modulation; Pulse code modulation; Digital communication; Multiplexing in
communication system; Coder; Error detection and correction using block codes; Multiple access
techniques; Terrestrial radio communication system; Radio wave propagation; Electronic mail and
document communications.
This created by
Abdur Rahman
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
Introduction to digital communication, modulation technique; Pulse modulation; Pulse amplitude
modulation; Pulse width modulation; Pulse code modulation; Digital communication; Multiplexing in
communication system; Coder; Error detection and correction using block codes; Multiple access
techniques; Terrestrial radio communication system; Radio wave propagation; Electronic mail and
document communications.
8 steps
Foundation Engineering (26451)
AIMS
To be able to understand the foundation and foundation engineering.
To be able to understand the soil stabilization.
To be able to understand and the bearing capacity of soil.
To be able to understand the factors determining types of foundation.
To be able to understand the foundation on sand and non-plastic soil, plastic soil, non-uniform soil,
rock.
To be able to understand the excavating and bracing.
To be able to understand the sheet pile wall, cofferdam and bulk head.
To be able to understand the damages due to construction operations.
SHORT DESCRIPTION
Foundation and foundation engineering; Factors determining the types of foundation; Soil stabilization;
Bearing capacity of soil; Foundation on sand and non-plastic silt; Foundation on clay and plastic silt;
Foundation on non-uniform soil; Foundation on rock; Excavation and bracing; Sheet pile, cofferdam &
bulkhead; Damages due to construction operations.
To be able to understand the foundation and foundation engineering.
To be able to understand the soil stabilization.
To be able to understand and the bearing capacity of soil.
To be able to understand the factors determining types of foundation.
To be able to understand the foundation on sand and non-plastic soil, plastic soil, non-uniform soil,
rock.
To be able to understand the excavating and bracing.
To be able to understand the sheet pile wall, cofferdam and bulk head.
To be able to understand the damages due to construction operations.
SHORT DESCRIPTION
Foundation and foundation engineering; Factors determining the types of foundation; Soil stabilization;
Bearing capacity of soil; Foundation on sand and non-plastic silt; Foundation on clay and plastic silt;
Foundation on non-uniform soil; Foundation on rock; Excavation and bracing; Sheet pile, cofferdam &
bulkhead; Damages due to construction operations.
27 minutes
15 steps
Wet Processing-1 (21341)
Course Conducted by
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
3 hours 26 minutes
17 steps
Textile Testing & Quality Control- 1 (1944)
CONDUCTED BY:
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute
Subject Aims:
Basic aspects of textile testing, humidity, moisture in textiles, sampling, identification of textile fibers, fiber length & its measurement, fiber strength & its measurement, Trash, naps & their measurement, fiber fineness &its measurement, micromere value, fiber maturity
Subject Outcome:
Students will be understood with an opportunity to acquire knowledge & skill about Testing,
Techniques & System of Testing. Operating system of different modern Testing instruments,
Interpretation & Analysis of testing data uses & Maintenance of testing instruments.
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute
Subject Aims:
Basic aspects of textile testing, humidity, moisture in textiles, sampling, identification of textile fibers, fiber length & its measurement, fiber strength & its measurement, Trash, naps & their measurement, fiber fineness &its measurement, micromere value, fiber maturity
Subject Outcome:
Students will be understood with an opportunity to acquire knowledge & skill about Testing,
Techniques & System of Testing. Operating system of different modern Testing instruments,
Interpretation & Analysis of testing data uses & Maintenance of testing instruments.
4 steps
Natural Textile Fiber(3rd Textile)
CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
5 hours 17 minutes
14 steps
Fabric Manufacturing-II(5051)
Conduct By
Sabina Yasmin
Instructor
Department of Textile & GDPM
Daffodil Polytechnic Institute
Sabina Yasmin
Instructor
Department of Textile & GDPM
Daffodil Polytechnic Institute
4 hours 56 minutes
15 steps
Apparel Manufacturing-I (21441)
The textile industry plays a very significant role in the GDP of Bangladesh. For the smooth running of this sector diploma textile engineers are required in the mid-level who are playing key roles in this sector. To prepare an appropriate diploma graduate should have sufficient knowledge in Apparel Manufacturing-I. To attain this objective, we have added this course to the diploma level which consists of apparel manufacturing process containing pattern making, pattern grading, marker making, CAD & CAM, fabric inspection, fabric relaxation, fabric spreading, and fabric cutting process. By acquiring that knowledge, skills and attitude students will be able to gather apparel manufacturing technology as well as able to study in further courses.
This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
5 hours 8 minutes
20 steps
Clothing-II (1962)
The textile industry specially RMG sector plays a very significant role in the GDP of Bangladesh. For the smooth running of this sector diploma textile engineers are required in the mid-level who are playing key roles in this sector. To prepare an appropriate diploma graduate should have sufficient knowledge in Clothing-II. To attain this objective, we have added this course to the diploma level which consists Cloth making process containing pattern making, pattern grading, marker making, CAD & CAM, fabric inspection, fabric relaxation, fabric spreading, and fabric cutting process. By acquiring that knowledge, skills and attitude students will be able to gather clothing technology as well as able to study in further courses.
This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
45 minutes
3 steps
Garments manufacturing –III
The Ready-Made Garment sector plays a very significant role in the GDP of Bangladesh. For the smooth running of this sector diploma textile engineers are required in the mid-level who are playing key roles in this sector. To prepare an appropriate diploma graduate should have sufficient knowledge in Garment Manufacturing-III. To attain this objective, we have added this course to the diploma level which consists of garment manufacturing process containing pattern making, pattern grading, marker making, CAD & CAM, fabric inspection, fabric relaxation, fabric spreading, and fabric cutting process. By acquiring that knowledge, skills and attitude students will be able to gather garment manufacturing technology as well as able to study in further courses.
This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
25 minutes
2 steps
CAD & CAM-I (5062)
Many textile and fashion designers modernly use specialized forms of technology such as computer-aided design (CAD) and computer-aided manufacture (CAM) to speed up the production process, reduce waste, and reduce labor costs overall. Textile manufacturers use CAM to make printed textiles and whole garments. The CAD information is sent to the CAM, which controls and manages the manufacturing process. Often CAM systems involve the use of CNC, or computer-numerical control machines, that control processes like cutting and joining garment segments. This subject objective is to know about CAD & CAM.
This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
2 hours 40 minutes
8 steps