All Courses

Mathematics-3(Diploma)
Mathematics-1(Diploma)

 To enable to calculate the areas of regular polygons, hexagons, octagon, hydraulic mean depth (HMD) of a
channel, area occupied by water of circular culvert. Excavation work.
 To provide the ability to calculate volume of regular solids like pyramid frustum of pyramid, prismoid,
wedge and area of curved surfaces.
 To enable to use the knowledge of gradient of a straight line in finding speed, acceleration etc.
 To enable to use the knowledge of conic in finding the girder of a railway bridge, cable of a suspension
bridge and maximum height of an arch.
 To make understand the basic concept and techniques of composition and resolution of vectors and
computing the resultant of vectors.

 SHORT DESCRIPTION
Menstruation: Area of rectangles, squares, triangles, quadrilaterals, parallelograms, rhombus, trapezium, circle,
sector, segment; Volume of rectangular solids, prism, parallelepiped, pyramids, cones, spheres, frustum of pyramid
and cone; Area of curved surface of the prism, Cylinder cone, pyramid and frustum of cone.
Co-ordinate Geometry: Co-ordinates of a point, locus and its equation, straight lines, circles and conic.
Vector: Addition and subtraction, dot and cross product
Mathematics-1(Textile)
Course Conducted by
M.M. Shahanuzzaman,
Instructor,
Daffodil Polytechnic Institute.

This Course for: Diploma in Engineering (1st Semester)
Course Aims:

To acquaint the students with the basic terminology of Algebra.
To be able to understand the complex numbers which are being used in electrical engineering.
To be able to understand the binomial expansion.
To be able to use the knowledge of trigonometry in solving problems of engineering importance.

Course Outcome:
Students will able to learn about Algebra and Trigonometry by studying this subject.
Detail discussions in Algebra will be: AP & GP, Polynomials & polynomial equations, Complex number, Permutation & Combination, Binomial
Theorem for positive integral index and negative & fractional index.
Detail discussions in Trigonometry will be: Ratio of associated angles, Compound angles, Transformation formulae, multiple angles and Submultiple angles.
Certification icon
Statistics
Course Conducted by
Md. Tarekujjaman Riad,
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Textile Engineering
Mathematics-1(Diploma)
Course Conducted by
S. M. Abul Kalam Azad
Instructor,
Daffodil Polytechnic Institute.

This Course for: Diploma in Engineering (1st Semester)
Course Aims:

To acquaint the students with the basic terminology of Algebra.
To be able to understand the complex numbers which are being used in electrical engineering.
To be able to understand the binomial expansion.
To be able to use the knowledge of trigonometry in solving problems of engineering importance.

Course Outcome:
Students will able to learn about Algebra and Trigonometry by studying this subject.
Detail discussions in Algebra will be: AP & GP, Polynomials & polynomial equations, Complex number, Permutation & Combination, Binomial
Theorem for positive integral index and negative & fractional index.
Detail discussions in Trigonometry will be: Ratio of associated angles, Compound angles, Transformation formulae, multiple angles and Submultiple angles.
Certification icon
Physics-1(25912)
To provide a foundation in scientific principals and processes for the understanding and application of technology. It will help our students to make a common base for further studies in technology and science. It also help to develop the basic knowledge of modern physics.
Physics-2 (5922 & 65922)
To provide a foundation in scientific principals and processes for the understanding and application of technology. It will help our students to make a common base for further studies in technology and science. It also help to develop the basic knowledge of modern physics.
Apparel Merchandising
CONDUCTED BY:
Rumana Rashid Tandra
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.

AIMS
To be able to understand the garments export and import management.
To be able to develop knowledge of export costing and pricing.
To be able acquire knowledge of garments export and import procedure.
To be able to understand the export documentation and export marketing communication.

SHORT DESCRIPTION
International trade theory; Export management; Category and quota of different
woven garments; Export business environment; Export policy decision of a firm;
Export costing and export pricing; Export finance; Export procedure; Export
documentation; Export marketing communication; Advantages of garments
export; Import procedure.
Web Design (66632)
Subject Outcome:
This Subject covers the knowledge, skills and attitudes required to –

- Enter text and graphic Medias for the webpage using HTML (Hypertext Mark-up Language) and check the completed website for QA (Quality Assurance) using latest common browsers.
- Use advanced web editing software’s to design and develop interactive websites and check the completed website for accuracy using common browsers.
- Convert design (.psd, in design, image etc.) to HTML and check the completed HTML for accuracy using common browsers.
- Add animations for website using CSS3, HTML5 or latest.

- Develop Cascading Style Sheets (CSS) that are linked to a HTML document in order to externally define and control styles and structure to enhance and achieve commonality among web documents, and check compatibility of the completed CSS with common browsers.
- Add and edit animations for website using common front end framework.

- Enter dynamic features for the Client Side Dynamic Web page using JavaScript and check the completed website for accuracy using common browsers
Specialized Garments Production
Protective clothing; Production of specialized garments; Microbial protections; Medical Textiles; Water repellent clothing; Proofing of garments; Water proofing; Fire proofing; Mildew Proofing; Moth Proofing
Garment Manufacturing-2
Fabric spreading; Fabric spreading machines; Fabric splice; Fabric cutting; Fabric cutting machine; Stitches and seam
Architectural Design and Drawing - 1 (68712)
Subject Aims:
• Develop the ability to use various drawing instruments and equipment.
• Enable Design and Drawing Media
• Enable the elements of drawing
• Enable in constructing and using various types of scales in drawing.
• Provide the ability to construct various geometrical figures.
• Enable to adopt various symbols used in drawing.
• Provide the skill of freehand sketching with shades and shadows.
• Provide the basic skills of drawing orthographic views.

Subject Outcome:
• Students will learn about Architectural Design and Drawing Equipment.
• Students will learn about Design and Drawing Media.
• Students will learn about Element of Design, concept of View, reproduction, Lettering, numbering and constructing.
• Students will adopting alphabet of lines and Dimensioning.
• Students will learn about Constructing scales, constructing geometrical figures and constructing conic sections.
• Students will adopting Symbols, Freehand sketching (with shades and shadows).
Certification icon
Architecture Rendering & Animation - 2 (68772)
Subject Aims:
• Develop knowledge, skill and attitude in the field of Computer Rendering & Animation (3D Max and V-ray) with special emphasis on - 3D modeling.
• Develop knowledge and skill on Materials and mapping.
• Develop knowledge and skill on light, camera and render.
• Develop knowledge and skill V-Ray; and animation.

Subject Outcome:
• Students will learn about 3D Modeling & Animation Software.
• Students will learn about 3D Modeling, Tool Panels & It’s Sub Tools.
• Students will learn about Modeling with primitives and 3D Max main tool bar.
• Students will learn about Modeling with Spline, Compound Object and Modifier Stack.
• Students will learn about Setting and Preferences menu, Massing of Building Project.
• Students will learn about Doors, Windows, AEC Extended and Stair, Finishing of Massing, Materials Basics, Texture Mapping. Lighting Basic, Camera Basic, Rendering Basic.
• Students will learn about V-Ray, Render, V-ray Materials and Lights, Animation Basic, Key frame Animation, Work Throw Animation.
Certification icon
Architectural Design and Drawing - 2 (68721)
Subject Aims:

• Providing students more advance knowledge about the Architectural design and drawing as they completed Architectural Design and Drawing - 1.
• It is necessary to acquire accurate knowledge about the Architectural design and drawing to be a successful professional of Architecture.

Subject Outcome:

• Students can use Anthropometric data in design and planning.
• Students’ concept of design process will be clear.
• Students will be aware about design factors and principle of design.
• Students are able to identify the difference between house & housing.
• Students can identify the areas of a residence.
• Students will know about different types of door & window.
• Students can Plan staircase.
Architecture Rendering & Animation ‐ 1 (68763)
Subject Aims:

• Students able to develop knowledge, skill and attitude in the field of Computer Rendering & Animation (Sketch up)
• With special emphasis on students understand drawing environments and drawing aids.
• Students can understand different setup of drawing in Sketch up.
• Students can drawing commands, modification & edits of drawing.
• Students can know about V‐Ray, printing the drawing elements.

Subject Outcome:

• Students will understand the drawing environments and drawing aids.
• Students will know different setup of drawing in Sketch up.
• Students will learn drawing commands.
• Students can use modification & edits of drawing; camera, material assign, lighting setup.
• Students can use V‐ray; camera, lighting, Rendering etc.
History of Architecture and Interior Design (68743)
Course Conducted By
Md. Asaduzzaman Russel
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 4th Semester)

Objectives of the Course
• To understand the Architectural characteristics of Egyptian Civilization.
• To understand the Architectural characteristics of West Asiatic Civilization.
• To understand the Architectural characteristics of Hellenic period of Greek Architecture.
• To understand the Architectural characteristics of Roman Civilization.
• Develop the knowledge of beginning of Islamic architecture during the Mughal period.
• To know the development of Islamic & indo Islamic architecture in East Bengal.
• To understand Architecture & the decorative arts of the 20th century.
• Know Architects Bio and their works. Modern Architects in Bangladesh and their works.

Short Description

Style of decorative arts; Egyptian Civilization Architecture; West Asiatic Architecture; History of Hellenic period of Greek Architecture; Architectural features of Roman Civilization; Development of Islamic architecture during Mughal period and Architecture in East Bengal.
Interior Design - 3 (68751)
Subject Aims:
• Understand the planning of a shopping center.
• Understand the retail and self-service shop.
• Prepare a presentation drawing of a shopping center.
• Understand the planning of a health service.
• Prepare design of a health service.

Subject Outcome:
• Planning of shopping center and basic area of shopping center.
• Retail and self-service Shops, service detail of shopping center and shopping center signage.
• Interior component of retail shop and self-service shop.
• General conception of Hospitals; patient Rooms; Admitting Department of Hospital.
Certification icon
Interior Design - 4 (68761)
Subject Aims:

• Students can design of an office building.
• Students can design the interior of an office building.
• Students can design the arrangement of furniture in an office building.

Subject Outcome:

• Students will understnad the planning aspects.
• Students will know the design criteria.
• Students will learn about FAR and Space allowance.
• Students can plan the Office arrangements.
• Students can design Conference room.
• Students can design Ceiling and floor.
• Srudents will be aware of RAJUK rules.
Web Mastering (66643)
This Course Conducted by
Johir Ahemmod Chowduri
Instructor of Computer Technology
Daffodil Polytechnic Institute

COURSE AIM:
To be able to acquire the knowledge and skills on domain & domain registration. To be able to acquire the knowledge and skills on web hosting.
To be able to published web site.
To be able to admin Cpanel & dashboard.
To be able to upload web contents.
To be able to acquire the knowledge and skills on the integrity & security of a website. To be able to acquire the knowledge on cloud hosting & SEO.

SHORT DESCRIPTION
Web mastering, domain & domain registration, web hosting, feature of hosting server, web publishing, administration cpanel, dashboard, cloud hosting, web maintenace & backup, SEO
Programming in Java (66651)
This Course Conducted by
Johir Ahemmod Chowduri
Instructor of Computer Technology
Daffodil Polytechnic Institute

INTENTION
• To develop knowledge and skill on programming Basics in Java Language.
• To develop knowledge and skill to create, compile, debug & execute a java program.
SHORT DESCRIPTION
Basics of Java Language, Data Structures in Java, Object Oriented Concepts in Java, Build and Packaging Tools, Threading, Generics, Lambda, Collections, I/O operations, networking in Java, Database communication in Java, RMI package, web server in Java, servlet.
Advanced Database Management System
This Course Conducted by
Johir Ahemmod Chowduri
Instructor of Computer Technology
Daffodil Polytechnic Institute

INTENTION
• To be able to acquire the knowledge and skill in the Relational and XML Database.
• To be able to acquire the knowledge and skill in the Normalization & Query Optimization
• To be able to acquire the knowledge and skill in the Transaction and Concurrency control.
• To be able to acquire the knowledge and skill in the Crash Recovery and Backup, Security and
Privacy.
• To be able to acquire the knowledge and skill in the Parallel and Distributed Databases, Mobile &
• Intelligent Databases, Object Oriented DBMS, Database applications.
SHORT DESCRIPTION
Relational and XML Database, Normalization, Query Optimization, Transaction and Concurrency control, Crash Recovery and Backup, Security and Privacy, Parallel and Distributed Databases, Mobile & Intelligent Databases, Object Oriented DBMS, Database applications.
Chemistry-1(5913)-Textile & GDPM
Chemistry is a basic science subject which is essential to all engineering courses. It gives knowledge of
engineering material, their properties related application and selection of material for engineering
application. It is intended to teach student the quality of water and its treatment as per the requirement
and selection of various construction materials and their protection by metallic and organic coatings.
The topics covered will provide sufficient fundamental as well as background knowledge for the
particular branch.
Basic Electronics (66811) / Analog Electronics (66823)
Course Conducted By
Md. Abdulla-All-Mamun Rupom
Instructor
Daffodil Polytechnic Institute

OBJECTIVES:
 To provide the understanding skill on Electronic Components, Electronic measuring and testing equipment.
 To provide understanding and skill on the basic concept of semiconductor junction and to identify physically a
range of semiconductor diodes.
 To develop comprehensive knowledge and skill on special diodes and devices.
 To develop the abilities to construct different rectifier circuits.
 To provide understanding of the basic concept and principle of transistor and to identify physically a range of
transistor.
 To provide understanding and skill on the basic concept of logic gates.

SHORT DESCRIPTION:

Electronic components; measuring and test equipment; color code and soldering; semiconductor; P-N junction
diode; special diodes and devices; power supply; transistor; transistor amplifier; logic gates.
Certification icon
Surveillance Security System(66652)
Subject Aims:

After completing this course, participants will be able to:
• Interact with the customer in order to identify and understand their requirements.
• Ensure customer satisfaction
• Install and Repair dysfunctional system.
• Identify dysfunctional components through visual inspection and by use of multi meter
• To understand surveillance system installation requirement in terms of equipment, system, tools, applications appropriate for a particular site
• Install and Configure access control device and software
• Select Suitable cameras & DVR/NVR to provide the better solution to the customers.
• Read and Comprehend signs, labels and warning
• Communicate effectively
• Follow behavior etiquettes while interacting with others
• Establishing good working relationships with colleagues within and outside the department by
Coordinating Surveillance system Installation Technician

Subject Outcome:
Basic concepts of Designing the surveillance security System, Aims of a surveillance camera system, System design elements, Conditions for equipment selections, Camera Installation, Functions of video surveillance, Types of Camera, Lens, sensors & their functions, DVR, NVR interface, Principles of remote access, networking Basic.
Certification icon
Fabric Manufacturing 1 (1932)
CONDUCTED BY:
Md.Ashikur Rahman
Department of Textile Engineering
Daffodil Polytechnic Institute

INTENTION

 To develop basic knowledge regarding the preparatory process of fabric manufacture.
 To develop the skill of the students, in the weaving preparatory process.
 To familiarize the students, with different types of loom.
 To provide skill on the basic concept of knitting.

SHORT DESCRIPTION OF BOOKS STUDIES:
The basic concept of fabric weaving processes like winding; Warping; Sizing; Denting & drafting; Read & heald count; Weaving; Power loom; Loom motion & basic idea of knitting
Network Administration & Services(66672)
Subject Aims:

After completing this course, participants will be able to:
 To be able to design computer network system
 To be able to acquire the knowledge on Network Administration.
 To be able to provide the knowledge and to develop skill on Different routing protocol.
 To be able to acquire the knowledge on learning, forwarding and filtering decision.
 To be able to provide the knowledge and to develop skill on network Security.
 To be able to provide the knowledge and to develop skill on Router, Switch, NIC and Cabling.
 To be able to establish and implement Link Redundancy.

Subject Outcome:
Network Basics; Sub-netting, VLSM, Summarization; Internet Routing Protocol, Open Shortest Path First (OSPF), Enhanced Interior Gateway Routing Protocol (EIGRP), Spanning Tree Protocol (STP), VLANs and Inter-VLAN routing, network address translator (NAT), network security, Internet Protocol Version 6 (IPv6), Link and Gateway Redundancy.
Renewable Energy (66753)
Course Conducted By
Md. Abdulla-All-Mamun Rupom
Instructor
Daffodil Polytechnic Institute

Upon completion of these content students will be able to achieve and acquire knowledge, skill and
attitude in the area of Renewable Energy with special emphasis on;
 Overview of renewable energy.
 Main features of renewable energy generation.
 Challenges and problems associated with the use renewable energy in Bangladesh.
 Availability and implementation of potential renewable energy.
Chemistry(25913)
Chemistry is a basic science subject which is essential to all engineering courses. It gives knowledge of
engineering material, their properties related application and selection of material for engineering
application. It is intended to teach student the quality of water and its treatment as per the requirement
and selection of various construction materials and their protection by metallic and organic coatings.
The topics covered will provide sufficient fundamental as well as background knowledge for the
particular branch.
Yarn Manufacturing-1
CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Certification icon
Textile Testing & Quality Control- II
CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Certification icon
Introduction to Textile Science
CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Certification icon
Advanced Short Staple Spinning
CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Social science-5821
Subject Aims:

To provide the opportunity to acquire knowledge and understanding on:
• Importance of civics and its relationship with other social sciences.
• The relationship of an individual with other individuals in a society
• Social organizations, state and government,
• Rule of law, public opinion and political parties
• UNO and its roles
• The basic concepts and principles of economics and human endeavor in the economic system
• The realities of Bangladesh economy and the current problems confronting the country
• The role of Diploma Engineers in industries
• Occupations and career planning for Diploma Engineers

Subject Outcome:

Civic and Social Sciences; Individual and Society; Nation and Nationality; Citizenship; state and
government; Law; Constitution; Government and its organs; public Opinion; Political Party; UNO
And its organs;
Scope and importance of Economics; Basic concepts of Economics- Utility, Wealth, consumption, income wages and salary and savings; Production- meaning, nature, factors and laws; demand and supply; Current economic problems of Bangladesh; Role of Diploma engineers in the economic development of Bangladesh; Occupations and career planning; Engineering team.
Mst. Shahonewas Seraj Subarna
You're enrolled
Last Update 01/28/2021
Members 1
Course
Fashion and Design
SHORT DESCRIPTION:
Basic concept of fashion style and accessories; Product and design development; Fashion mercendising and market promotion; Fashion drawing from life; Fabric representation; Fashion illustration
Clothing-1
SHORT DESCRIPTION:
Garments; Garment accessories; Tailoring process; Pattern making; Marker; Cutting machines; Fabric spreading; Seam & sewing
T.D.E.Power-2 (66774)
Course Conducted By
Md.Abdulla-All-Mamun Rupom
Instructor, Electrical Technology
Daffodil Polytechnic Institute

Medium and long transmission line; High Voltage DC transmission; DC distribution system; AC distribution
system; Underground cables; Laying & jointing of underground cables; Insulation resistance and dielectric
stress of UG cables; Capacitance in underground cables; Cable faults localization; Operation and maintenance
of distribution line; Insulation resistance measurement; Grid system.
Interior Design-1(68731)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 3rd Semester)

Objectives of the Course
After completion of the course students will be able to:
❖ Acquire knowledge and skill with understanding basic terminology used by architects and interior designers.
❖ Understand design process of a residence.
❖ Understand color of a residence.
❖ Understand Texture of a residence.
❖ Understand materials of a residence.
Certification icon
Interior Construction-2(68753)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 5th Semester)

Objectives of the Course
After completion of the course students will be able to:
❖ Understand the interior construction procedure.
❖ Learning about the construction procedure of living room.
❖ Can See the construction procedure of false ceiling.
❖ Learn how to prepare materials schedule, cost and development process.
❖ Understand To prepare construction documents of interior wall paneling.
Digital Presentation & Visual Technique (68754)
Course Conducted By
Shanta Islam
Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 5th Semester)
Objectives of the Course
After completion of the course students will be able to:
❖ Understand the Graphic Design.
❖ Knowing about Design software.
❖ Understand the Editing software.
❖ Learn the Commercial printing output.
Furniture Design & Drawing (68773)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 7th Semester)

Interior Project(68771)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 3rd Semester)
Objectives of the Course
After completion of the course students will be able to:
❖ Understand the Individual space interior
❖ Can draw the Related Drawing
❖ Learn about the considering materials
❖ Develop knowledge, skill and attitude of preparing different types of Interior Project.
Mathematics-2(Diploma)
Course Conducted by
M.M. Shahanuzzaman, Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering(2nd Semester)
SHORT DESCRIPTION
Algebra: Determinants, Matrix, Exponential Series.
Trigonometry: Inverse circular functions, Properties of triangle and solution of triangles.
Differential Calculus: Function and limit of a function, differentiation with the help of limit, differentiation of functions, geometrical interpretation of dx/dy, successive
differentiation and Leibnitz theorem, partial differentiation.
Integral Calculus : Fundamental integrals, integration by substitutions, integration by parts, integration by partial fraction, definite integrals.
Testing & Maintenance of Electrical Equipment
Course Conducted By
Md.Shafikul Islam (Milon)
Instructor
Electrical Technology.
Daffodil Polytechnic Institute

Aims
To provide the students opportunities to acquire knowledge, skills and attitude in the area of Testing
and Maintenance of electrical equipment with the special emphasizes on:


•Trouble shooting and maintenance of electrical equipment,
•Faults findings and remedy the faults of Battery, DC Generators, DC motors,
•Faults findings and remedy the troubles Transformers, Induction motors, Alternators,
•Faults findings and remedy the troubles Synchronous motor and Circuit breaker



Short description
Trouble shooting and maintenance of electrical equipment, Identification of trouble and remedy the
troubles of Battery, DC Generators, DC motors, Identification of trouble and remedy the troubles of
Transformers, Induction motors, Alternators, Identification of trouble and remedy the troubles
Synchronous motor and Circuit breaker
Basic Electricity/Electrical Engineering Fundamentals (6711/66711/26711)
Course Conducted By
Md. Abdulla-All-Mamun Rupom/Md. Shafikul Islam
Instructor
Daffodil Polytechnic Institute

AIMS
• To familiarize the basic electrical quantities & laws and to apply them in solving problems of electrical circuits.
• To acquaint with electro-chemistry, electro-magnetism, electro-magnetic induction and electrostatic.
• To develop skill in electrical wiring.
• To appreciate the safety measures to be taken for electrical wiring.

SHORT DESCRIPTION
Electric current and ohm's law; conductors and insulators; basic electrical circuits; power and energy; basic electro-chemistry; electro-magnetism; electro-magnetic induction; electrostatics; wires and cables; hand tools used in wiring; house wiring; controlling devices; protective devices; earthing.

Certification icon
Basics of Mathematics
Course Conducted by
M.M. Shahanuzzaman,
Instructor,
Daffodil Polytechnic Institute.
This basic of Mathematics Course. There are 3 important topics include in this Course, such as Geometry, Trigonometry & Algebra.
AC Machines - 2 (66771)
Course Conducted By
Md.Shafikul Islam (Milon)
Instructor
Electrical Technology.
Daffodil Polytechnic Institute

AIMS
To provide the student with an opportunity to acquire knowledge, skill and attitude in the area of alternating current machines with special emphasis on:
1. Alternator
2. Synchronous motor
3. Single phase motor Motor control.

SHORT DESCRIPTION
Alternators: Principle, construction, emf equation, effect of load on alternator; voltage regulation, parallel operation and starting procedure of alternator; Synchronous motor: Operation, torques and excitation, Phase swinging, Starting method and uses, Power factor correction; Single phase motor: Operation of single phase motor; Operation of AC commentator motor; Motor control: Speed control of single phase motor; Starting of three phase induction motor; Controlling speed of three phase induction motor.
English/Basic English/English 1
Course Conducted by
Tamanna Rahman
Instructor
Daffodil Polytechnic Institute
English course deals with the basic grammar of the English language. The objective of this course is to make the students capable of using basic grammar.
Certification icon
Communicative English
Course Conducted by
Nahid Hasan
Instructor
Daffodil Polytechnic Institute
Communicative English course deals with the issues related to communication in the English language.
Fabric Manufacturing-2 (1941)
CONDUCTED BY:
MD.ASFAKUR RAHMAN
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.

SHORT DESCRIPTION:

Shed; Shedding mechanism; Tappet; Top roller mounting; Picking; Beating up; Take up motion, Let off motion & basic idea of knitting
Database Application(66621)

This Course Conducted by
Mst. Sathi Akter
Instructor of Computer Technology
Daffodil Polytechnic Institute

INTENTION
To assist in the efficient use of database packages.
To develop skill on computerized database management.
To develop skill on programming with database management.

SHORT DESCRIPTION
Database management package: Creating the database; Editing the database; Searching the records; Customizing the data entry form; Creating the query; Arranging the records; Generating reports.
Database management language: Creating a command file; Writing simple database program using decision-making commands; Designing data entry screen.
ELECTRICAL ENGINEERING MATERIALS (EEM)
Course Conducted By
Md. Shafikul Islam
Instructor
Electrical Technology.
Daffodil Polytechnic Institute

OBJECTIVES:
● Develop and understand the concept of conducting materials.
● Develop and understand the concept of insulating materials.
● Develop and understand the concept of semiconducting materials.
● Understand the magnetic materials.
● Understand the transformer oil.
● Understand the optical fiber.

SHORT DESCRIPTION:
Conducting and no conducting materials, conduct materials, high resistive materials, magnetic materials, insulating
materials, transformer oil, semiconducting materials, optical fiber.
Certification icon
Mathematics-2(Textile)
Course Conducted by
Farha Diba,
Sr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Textile Engineering (2nd Semester)

Certification icon
General Textile Processing-1
SHORT DESCRIPTION

To understand the flow-chart of yarn manufacturing; Ginning; Mixing and Blending; Blow-
Room; Batch & Batching; Cotton & Jute carding; Cotton and Jute drawing & doubling; Lap forming;

Combing; Simplex; Ring frame; Jute spinning frame; Yarn numbering system. To understand the basic
concepts of Winding; Warping; Sizing; Drafting & Denting; Weaving and knitting.
Perspective Drawing & Rendering(68744)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for Diploma in Engineering (AIDT 4th Semester)

Objectives of the Course
After completion of the course students will be able to:
 System and method of perspective drawing
 About One point perspective drawing
 About Two point perspective drawing
 About Three point perspective drawing
 Technique of distortion in perspective drawing
 Shades and shadows on perspective drawing
Textile Raw Materials- 1 (1911)
CONDUCTED BY:
Md.Ashikur Rahman
Instructor
Department of Textile Engineering and GDPM
Daffodil Polytechnic Institute

INTENTION
Our students will be able to develop knowledge, skill, and attitude in the field of garments manufacturing with special emphasis on:
 textile raw materials.
 different natural textile fibers.
 different natural fibers properties.
 natural filament yarn production.

SHORT DESCRIPTION ABOUT BOOKS STUDIES:
To understand the basic concepts of Cotton fibers; Jute fibers; Linen and Hemp fiber; Sisal and coir fibers; Wool fibers; Silk fibers.
Switch Gear & Protection
To provide the student with an opportunity to acquire knowledge, skill and attitude in the area of switchgear and protection with special emphasis on :
• Busbar and sub-station equipment.
• Circuit breakers and relays.
• Protection system for busbar, alternators, transformer, feeder and transmission line.
• Protection against over voltage.
• Sub station.

Subject Outcome:
After the semester, Students will be able to detect & operate Switch gear; Electrical faults; Busbar arrangements; Short circuit current calculation; power system stability; Current limiting reactors; Fuses; Circuit breakers; Relays; Protection of alternator & transformer; Protection of feeder & transmission line; Busbar protection; Over-voltage on transmission line; Protection against lightning; Sub-station.
Network Security System (66676)
Subject Aims:

After completing this course, participants will be able to:
 To be able to understand computer network and information security.
 To be able to learn why network security is important
 To be able to explain network security prevention, detection and response.
 To be able to define and explain the concept of network confidentiality, information integrity, network availability, network auditability.
 To be able to understand management’s role in the development, implementation and maintenance of network security.
 To be able to understand security architecture, it’s principles, components and employment.
 To be able to understand the relationship between risks, threats, vulnerabilities and countermeasures.
 To be able to understand the need for constantly evaluating the status of security management.
 To be able to understand the difference between policies, procedures, standards, guidelines, encryption, cryptography terms, firewalls.
 To be able to understand operation of Virtual Private Networks, importance of authentication and the characteristics of a good password.

Subject Outcome:
Network and information security, network security prevention, detection and response, the concept of network confidentiality, information integrity, network availability, network auditability, security architecture, relationship between risks, threats, vulnerabilities and countermeasures, policies, procedures, standards, guidelines, encryption, cryptography terms, firewalls, Operation of Virtual Private Networks, authentication and the characteristics of a good password.
Certification icon
New Content
Clothing II (1962)
CONDUCTED BY:
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute

INTENTION OF THIS COURSE:
• Our student will develop understanding and skill on operating different sewing machine. sewing of garments by using different types of sewing machine
• Our student can operating different sewing machine.
• Our student can get knowledge of different work aid of sewing machine.
• Our student can get knowledge of Interlining.
• Our student can get knowledge of Garments Finishing.
• Our student can get knowledge of care level code.

After completing the Course student will have knowledge about different sewing machine, sewing of garments by using different types of sewing machine, knowledge of different work aid of sewing machine, Interlining, Garments finishing & Garments care level code.
E-Commerce and CMS (66674)

OBJECTIVES
 Understand the E-Commerce and E-Commerce Transition in the World.
 Recognize the benefits and limitations of E-Commerce.
 Analyze different E-Commerce business models
 Analyze different E-commerce Payment System.
 Understand the E-Commerce Security System.
 Understand the concept of CMS.
SHORT DESCRIPTION
UNDERSTAND THE CONCEPT OF E-COMMERCE, E-COMMERCE BUSINESS

MODELS, INFRASTRUCTURE, MARKETING CONCEPT, E-COMMERCE ENVIRONMENT, E-
COMMERCE ─ PAYMENT SYSTEMS, SECURITY SYSTEMS, CONCEPT OF CMS WITH

WORDPRESS / DRUPAL / JOOMLA.
Environmental Studies(69054)
Basic concepts of environment; Ecology & eco-systems; global environmental issues Air and atmospheric layers; Air pollution sources & effects; climate change,green house effect and depletion of ozone layer; Control of air pollution; Water pollution sources & effects; Monitoring of water pollution; Waste water treatment; Sound pollution and its control; Soil pollution and its management; Radioactive pollution and its control; Solid waste management; Major environmental issues and disaster management- Arsenic pollution; Pesticides pollution and its management, Environmental legislations and guidelines frame work and policy in Bangladesh.
Certification icon
Database Management System(66654)
AIMS
● To be able to acquire the knowledge and skill in the database system concept.
● To be able to familiarize with data models in database systems.
● To be able to acquire the knowledge and skill in the Relational databases
● To be able to acquire the knowledge and skill in the Integrity & security.
● To be able to acquire the knowledge and skill in the Data storage, Transactions & concurrency
● Control and Database system architecture.

SHORT DESCRIPTION
● Database system concept; Data models; Relational databases, Integrity & security, Data storage,
● Transactions & concurrency control, cursor and Database system architecture.
Diploma math
This Math for Diploma.
Fundamental Surveying-66435
To provide the students with an opportunity to acquire knowledge and skills to:
• Survey work with chain, compass and total station.
• Conduct cadastral survey.
• Conduct leveling and contouring
• Calculation of the area by using different instrument.
Advance Electricity (66732)
OBJECTIVES
After completion of these contents students will be able to acquire, achieve and develop:
 To acquire knowledge and skills of Electrical house wiring.
 To develop the capacity to know constructional details and working principles of electric lamps.
 To develop understanding about earthing.
 To develop understanding about controlling and protective devices.
 To acquaint the principles of Electro-magnetic Induction.
 To familiarize Magnetism and magnetization
SHORT DESCRIPTION
Advance wiring; Electric lamps; Earthing; Controlling and Protective devices; Electro-magnetic Induction;
Magnetism and Magnetization; Hysteresis and eddy current loss; Energy stored in magnetic field
Advanced Knitting & Non Woven (1975)
Scouring; Souring; Bleaching; color & concept of color; Dye & dyeing; Direct dyes; Basic dyes; Acid dyes; Vat dyes and Reactive dyes.
Textile Calculation-2 (1977)
CONDUCTED BY:
Md.Asfakur Rahman
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.

INTENTION
To develop the basic knowledge to calculate :
a) Winding b) Warping
c) Sizing d) Loom and knitting production.
e) Read count and heald count. f) Fabric calculation
g) Fabric requirement in garment. h) Sewing thread consumption
i) Costing j) Gearing Calculation

SHORT DESCRIPTION:
Calculation of winding; Calculation of warping; Calculation of sizing;Calculation of heald count and Reed count; Calculation of loom and
knitting productions,Cloth calculation; Calculation of cloth requirement in garments; Sewing thread consumption & costing.
Fabric Structure Design & Color (5055)
CONDUCTED BY:
MD.ASFAKUR RAHMAN
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
INTENTION :
To provide the student with an opportunity to acquire knowledge, skill and attitude in the area of fabric structure and cloth analysis with special emphasis on:
● Fabrics design
● Fabrics construction
● Fabrics drafting & lifting plan
● Analysis of cloth
SHORT DESCRIPTION
Basic Concepts of textile design and artistic design; Drafting and lifting. Weaving structure; Plan weave; Twill weave; Satin and sateen weave; Ornamentation of fabrics design; Figuring with extra threads; Double cloth Backed cloth; Leno weave; Velvet; Terry; and Analysis of cloth.
Garments Dyeing Washing and Finishing (5072)
CONDUCTED BY:
MD.ASFAKUR RAHMAN
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
INTENTION:
To be able to develop knowledge, skill and attitude in the area of garments dyeing, washing and finishing with special emphasis on:
 garments dyeing, steaming & drying
 garments washing and finishing
 enzyme, De-Lusturing and brightening finish of garments
 drying machine and ironing of garments.
SHORT DESCRIPTION
Garments washing; Stone wash; Chemical wash; Garments finishing; Enzyme finish; De-Lusturing finishing of garments; Brightening finish of garments; Garments dyeing; Steam of garments; Drying machine; Ironing of garments.
Printing & Finishing Process (5054)
CONDUCTED BY:
MD.ASFAKUR RAHMAN
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.

INTENTION :
To be able to develop knowledge, skill and attitude in the field of printing and finishing process with special emphasis on:
printing, printing paste and ingredients
printing thickness and printing machinery
method and style of printing
ageing and steaming
printing and finishing
sunforising and calendaring.

SHORT DESCRIPTION

Printing; Printing paste and ingredients; Printing thickness; Methods and styles of printing; Printing machinery; Ageing and steaming; Printing of cellulose fabric; Printing of wool and silk fabrics; Printing with disperse dye; Printing with pigments; Textile finishing; Sunforising; Calendering and Anti creasing.
Generation of Electrical Power (66752)
Course Conducted By
Md.Shafikul Islam (Milon)
Instructor
Electrical Technology.
Daffodil Polytechnic Institute

Aim

To provide the student with an opportunity to acquire knowledge, skill and attitude in the area of planning and
estimating of electrical installation with special emphasis on:
• Planning and preparation of estimate for an electrical installation.
• Internal wiring and service connection.
• Installation of electrical machines.
• Electricity act / rules and safety practices..

Outcome

 Student will be able to know about Planning and estimating;
 They will be able to know how to use Measurement book,
 They will be able to understand importance of price sheet, catalogue and schedule of labor rate;
 They can calculate the Illumination;
 They will be able to chose Conductor size and can calculate current carrying capacity;
 They will be able to know Electricity Acts/Rules; Electrical codes;
 They will be able to perform Internal wiring installation;
 They can estimate for Distribution line;
 They can perform winding of electrical machine
 They will be able to Test electrical installation.
Construction Process-2 (66451)
Course Conducted by
Md.Josim Uddin.
Jr. Instructor,
Daffodil Polytechnic Institute.

This Course for: Diploma in Engineering (5th Semester Civil)

AIMS
After completion of the course the students will be able to:
 Understand the construction process of arch and lintel.
 Understand the construction process of different types of floor.
 Understand the construction process of stairs.
 Understand the construction process of different types of roof.
 Understand the different finishing works in building.
 Understand the construction process of doors and windows.
 Understand the different operation and maintenance construction equipment.
 Understand the construction of bridge, culvert, canals etc.

SHORT DESCRIPTION
Arches; Lintels; Ground floors; Upper floors; Damp proofing; Termite treatment; Stairs; Roof; Pitched
roof; Plastering and pointing; Doors; Windows; Carpentry and joinery; Scaffolding; Form works, Pointing
& Varnishing, construction equipment, Building Services, Insulation, bridge/culverts and canals etc.
Surveying-3 (66452)
Course Conducted by
Md. Shazzad Hossain
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)

AIMS
 To be able to set out different types of curve.
 To be able to conduct sounding.
 To be able to learn using total station,
 To be able to perform city survey.

SHORT DESCRIPTION
Curve ranging; Setting out Plan/alignment; Hydrographic survey; Total station; City survey.
Water Supply Engineering (66453)
Course Conducted by
Uchingla Marma
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)

AIMS
 To enable to select suitable methods for collection and distribution of water from given source to
given community.
 To enable to identify impurities of water of given sources and selected suitable method/methods of
purification up to potable standard.
 To assist in comparing various types of water pipes and pipe fittings.
 To develop understanding of the procedure of construction, repair, replacement and maintenance
of water supply systems.
 To provide understanding of the socio-economic aspect of water supply and sanitation (WSS).

SHORT DESCRIPTION
Introduction; Water requirements; Sources of water; Water pipes; Collection and transmission of water;
Quality of water; Treatment of water (clarification); Treatment of water (filtration); Treatment of water
(disinfection and softening); Miscellaneous water treatment; Water distribution; Water reservoir;
Distribution system; Rural water supply system; Plumbing system.
Construction Management & Documentation
Course Conducted by
Md. Josim Uddin
Jr. Instructor,
Daffodil Polytechnic Institute.

This Course for: Diploma in Engineering (7th Semester,Civil)

AIMS:
 To be able to understand the modern techniques of construction management.
 To be able to understand the operational research & site layout and organization.
 To be able to understand the mobilization of materials in construction management.
 To be able to understand the quality and cost control.
 To be able to understand the Pre-tender and Post-tender planning.
 To be able to prepare pre-qualification documents.
 To be able to evaluate pre-qualification documents.
 To be able to prepare technical specifications.
 To be able to prepare financial evaluation.
 To be able to prepare contract clauses.
 To be able to prepare tender documents.
 To be able to prepare contract documents.
 To be able to prepare Quality control document.
 To be able to understand the cost control.
 To be able to develop knowledge, skill and attitude of evaluating tenders and preparing
comparative statement.

SHORT DESCRIPTION
Principles of management and construction; Organization of contracts department; Operational
research; Site layout and organization; Mobilization of materials; Demobilization of STRUCTURE; Safety
in construction; Quality and cost control; Codes and building by-laws; Tender; Pre-tender and Posttender planning; Tender document; Tender notice; Instruction to tender; Contract clauses/condition of
contract; Technical specifications of materials and works; Pre-qualification of contractors; Evaluation
and comparative statement; Contract agreement.
Sanitary Engineering (66472)
Course Conducted by
Md. Josim Uddin
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (7th Semester,Civil)

AIMS
 To be able to compare various methods and techniques used to treat and dispose of sewage and control of
water pollution and select appropriate methods for given situations.
 To be able to identify various sewer pipes, fittings, procedures of construction, repair, replacement
and maintenance of sewage disposal system.
 To be able to determine the size of circular sewer pipes, septic tanks and soak pit of sewage
disposal system.
 To be able to compare various types of pit latrine and biogas generating plants.
 To be able to understand the basic concept of solid waste and management.
 To be able to understand the basic concept of ETP

SHORT DESCRIPTION
Sewage; Sewer pipe; Sewer appurtenance; Flow in sewer; Construction of sewer; Maintenance of
sewer; Characteristics of sewage; Sewage disposal; Preliminary Sewage treatment system; Secondary
treatment system; Sludge treatment and disposal; Effluent Treatment Plant; Water pollution and its
effects on the environment; Rural sanitation; Health and hygiene; Generation of biogas; Sources and
classification of solid waste; Municipal and industrial solid waste; different steps of solid management.
Water Resources Engineering (66475)
Course Conducted by
Zayanta Chandra
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (7th Semester,Civil)

AIMS
• To provide understanding on the influence of the climatic condition of Bangladesh on its ground
water and surface water flow
• To provide understanding of recharging of underground water and ascertain its necessity in
Bangladesh.
• To enable to select a suitable source of water and method of irrigation for particular situation.
• To enable to select a suitable method of drainage for particular situation.
• To enable to select a suitable method for control of rivers and flood in Bangladesh.
• To understand rain water harvesting.

SHORT DESCRIPTION
Sources of water; Rainfall and run-off; Lifting of underground water; Storing and Recharging of
ground/rain water; Irrigation and its effect; Well irrigation; Water requirements for crops; and quality
of irrigation water; Storage reservoir; Dam and dyke; Irrigation canals; Silt deposit; Scouring; Canal
works; Drainage; River training works; Flood and flood management and flood control; Irrigation
projects in Bangladesh.
English II
Course Conducted by -
Nahid Hasan
Instructor of English
Tamanna Rahman
Jr. Instructor
Daffodil Polytechnic Institute

The objectives of the course are:
- Developing the basic language skills of the learners
- Increasing the accuracy of grammar
- Improving the spelling and pronunciation
- Developing the habit of creative writing
- Developing presentation skill
- Developing the public communication
Design Of Structure - I
AIMS
 To be able to understand the properties of reinforced cement concrete (RCC).
 To be able to select the suitable size of reinforced concrete beams & lintels with reinforcement.
 To be able to supervise the placing of reinforcement for beams & lintel.
Design of Structure – 2
AIMS
 To be able to select suitable reinforcement and section required for reinforced cement concrete
solid floor / roof slab.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
column.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
stair slab.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
footing for brick wall and reinforced cement concrete wall.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
column footing.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
cantilever retaining wall.
 To be able to supervise the placement of reinforcement for all types of reinforced cement
concrete works.
 To be able to acquire preliminary knowledge about pre-stressed concrete.
Fabric Structure and Analysis-01
Course Created By
Md.Ashikur Rahman
Instructor, Textile & GDPM
Daffodil Polytechnic Institute

AIMS :
● To develop the basic knowledge required for structural design of fabric.
● To develop the skill of the student in textile design.
● To familiarize the student with different Plain & Twill weave.
● To acquire knowledge of different structured fabrics.

SHORT DESCRIPTION :
Basic concept of Textile design; Artistic design; Drafting & lifting plan; Weave plan; Plain weave; Twill weave; Diamond; Diaper; Broken twill; Stepped twill & standard commercial fabrics.
Architectural Materials and Products(68711)
Subject Teacher - Sharmin Akter

After complete this subject student Able:-
To provide the students with an opportunity to acquire knowledge and skill,
• To be able to recognize the sources of various architectural materials.
• To be able to understand the characteristics of various architectural materials.
• To be able to understand the uses of different architectural products.

SHORT DESCRIPTIONS:
Aspects of architectural materials , use of mud, brick, sand, cement, lime as mortar, timber,
insulating materials, glass, paint & varnishes, acoustics materials and steel as architectural materials.
Hydraulics
AIMS
• To enable to understand the behavior of incompressible fluids.
• To enable to understand the fundamentals of buoyancy.
• To enable to understand flow of liquid in closed system and in open channel.
• To assist in identifying the common measuring instruments / apparatus used in measuring the
various parameters of flowing liquid.
• To enable to applying the common measuring instruments / apparatus in measuring the various
parameters of flowing liquid.
Mathematics-3 (Textile)
Course Conducted by
Farha Diba,
Sr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Textile Engineering
Interior Graphics(68732)
Interior Graphics
Subject Coad: 68732


This Course for: Diploma in Architecture and Interior Design Technology (3rd Semester)

Objective of the Course:
• Develop knowledge, skill and attitude in the field of the graphical representation of architectural design & drafting.
• Creativity
• Elements of design.
• Principles of Design
• Proportion and scale
• Composition
• Color
• Rendering and presentation

SHORT DESCRIPTION -
Creativity, creative process and theories, rhythm, emphasis, proportion, appearance, unity, variety, repetition, opposition, transition, form, shape & space, transformation of forms, balance, rule of thirds, scale and Proportion, golden section, composition, color, rendering and presentation.

AIDT Professional Practice (68774)
Subject Aims:

• To be able to understand Architectural & Interior design Profession.
• To be able to understand the importance of site visit
• To be able to develop knowledge of architectural and interior design profession.
• To be able to understand the controlling authority in Architectural field
• To be able to understand BNBC.
• To be able to understand the public works accounts.
• To be able to acquire knowledge of the public procurement rules(PPR).
• To be able to prepare tender documents.
• To be able to develop knowledge, skill and attitude of evaluating tenders and preparing comparative statement.
• To be able to understand the Project Estimate and Valuation.
• To be able to Understand the Arbitration.

Subject Outcome:

Architectural & Interior design Profession, professional practice, site visit, practice of Architect profession, set- up of Architectural firm, compensation for architect’s / Designers service, controlling authority and related local authorities, building By-laws & Bangladesh National Building Code, Arbitration.
Theory of Structure
• To be able to consolidate and extend the fundamental understanding of the behavior of statically
determinate structures i.e. beams, frames etc.
• To be able to develop of awareness of structural behavior such as deflection and stability of
masonry dam.
• To be able to develop understanding for selection of suitable section of beam and member of the
truss.
Structural Mechanics
• To enable to apply the knowledge of scientific principles to problems of mechanical nature.
• To develop an understanding of mechanical properties of materials.
• To assist in applying mathematical and geometrical calculations to the analysis of statically
determinate beams.
Digital electronics and microprocessor
OBJECTIVES
Upon completion of this content student will be able to achieve and acquire knowledge, skills and
attitude in the area of Digital Electronics and Microprocessors special emphasis on:
 Number system, Binary arithmetic and codes
 Logic gates and Sequential logic circuits
 Semi conductor memories, A/D and D/A converters
 Microprocessors
Electrical & Electronic Measurement-I
OBJECTIVES
Upon completion of this contents students will be able to achieve and acquire knowledge, skill and
attitude in the area of Electrical and Electronic measurement-1 with special emphasis on;
 Accuracy, precision, sensitivity and error in electrical measuring instruments.
 Concept of operation of different types of electrical measuring instruments.
 Selection of correct type of meters for particular measurement.
 Measurement of power of single phase and three phase system.
 Concept of operation of energy meter.
INSTRUMENTATION & PROCESS CONTROL
OBJECTIVES
Upon completion of these content student will be able to achieve and acquire knowledge, skills and
attitude in the area of instrumentation and process control with special emphasis on:
 Transducer
 Signal conditioning
 Recorders.
 Measuring techniques of special quantities
 Data acquisition
 Control theory
 Servo control
OUTSIDE PLANT (69432)
To provide the student with an opportunity to develop knowledge, skill and attitude in the area of outside plant with
special emphasis on:
• Features of telecommunication cable
• Electrical properties of cable
• Features of manhole , hand hole , ducts and trenches
• Cross connection cabinet
• Mast , tower and antenna
• Testing of telecommunication cable
• Fault localization of telecommunication cable
PCB Design & Circuit Making
AIMS
To provide the students with an opportunity to acquire knowledge and skills to
 Operate and practice PCB design software tools
 Perform schematic design including simulation
 Perform PCB layout design including auto routing
 Generate the output of the PCB layout design
 Build the circuit by soldering
Textile Design & Color - 1973
Course Created By
Rumana Rashid Tandra
Instructor, Textile & GDPM
Daffodil Polytechnic Institute

AIMS :
1. To familiarize the students with the drawing instrument and their uses.
2. To develop the skill of the student in making designs.
3. To give the students a clear concept about light and color.
4. To familiarize with color and weave effects.
5. The students able to develop knowledge, skill and attitude in the area of Textile design and color.

SHORT DESCRIPTION

Basic concept of drawing instruments and their uses; Designing; Motif and repeat of a design; Construction of design from incomplete repeats; Light and color phenomena; Theory of color; Color harmony and contrast of color; Color and weave effect; Check-stripe and shaded design.
Telecom Workshop Practice
This created by
Abdur Rahman
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
Telecommunication Basic(69411)
Telecommunication Basic(69411)
This created by
Abdur Rahman
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute

Telecommunication and its background; Terms of Communication; Signals and Systems; Communication
Frequency and Spectra; Modulation and Demodulation; Multiplexing/ De-multiplexing; Multiple Access
Techniques; Radio transmitter; Radio receiver; Network; Internet.
Yarn Manufacturing 3 (1951)
CONDUCTED BY:
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute

AIMS
To enable the students with an opportunity to acquire knowledge, skill and attitude in the area of yarn manufacturing with special emphasis on
• Roving Frame/Speed frame/Simplex
• Ring frame
• Conditioning
• Winding
• Reeling
• Bundling and baling
• Waste

SHORT DESCRIPTION
The basic concept of ring-spinning frame; Component parts of the ring-spinning frame; Drafting and roller setting; Ring, traveler & spindle of ring-spinning frame; Faults, change places and waste in spinning; Conditioning of yarn; Winding; Reeling; Bundling and baling; jute spinning frame; Draft & Twist of spinning frame; Building & winding; Technical aspects of spinning frame; Waste in cotton spinning.
Fabric Manufacturing 3 (1952)
CONDUCTED BY:
Md.Ashikur Rahman
Department of Textile Engineering
Daffodil Polytechnic Institute

Subject Aims:

1. To develop the basic knowledge regarding Fabric manufacturing
2. To develop knowledge & skill about different motions
3. To acquire knowledge to make different fabric shedding mechanisms, stop motion
Subject Outcome:1. To know the process of fabric manufacturing
2. Understand properly the process of stop motions, and shedding mechanisms.
Production Planning & Control (7074)
CONDUCTED BY:
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute

INTENTION
1. To develop the basic knowledge regarding production control
2. To develop knowledge & skill about different planning
3. To acquire knowledge to make different inventory control
4. To acquire knowledge to know different production calculation

SHORT DESCRIPTION ABOUT BOOKS STUDIES:
Production system; division of labor; production planning; localization of industry; time study and motion study; selection of factory site; factory building; plant layout; equipment layout; operation of the factory; production control; quality control; cost control; inventory control; materials handling; case study.
Digital Communication(69451)
Digital Communication(69451)
This created by
Abdur Rahman
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute

Introduction to digital communication, modulation technique; Pulse modulation; Pulse amplitude
modulation; Pulse width modulation; Pulse code modulation; Digital communication; Multiplexing in
communication system; Coder; Error detection and correction using block codes; Multiple access
techniques; Terrestrial radio communication system; Radio wave propagation; Electronic mail and
document communications.
Wave Propagation & Radar (69453)
Wave Propagation & Radar
This created by
Abdur Rahman
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute

SHORT DESCRIPTION
The propagation of radio waves, Transmission media, Electronic Wave propagation, the effect of earth
curvature & ionosphere on wave propagation, the basic concept of radio detection and ranging
(RADAR), the basic features of radar system, the features of radar system, basic concept of radio aids,
navigational aids.
Satellite Communication
Satellite Communication
This created by
Abdur Rahman
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute

SHORT DESCRIPTION
Satellite Communication; Communication Satellite Link Design; Analog and digital Satellite Communication;
Multiple access Techniques in Satellite; Satellite Orbits and Inclination; Communication Satellite Subsystems;
Satellite Earth Station; Special Purpose Communication Satellites; LASER Satellite Communication; Satellite and
cable Transmission Systems; Global indication of Satellite and Performance Measurement of Satellite link.
Network Planning & Management
Network Planning & Management
This created by
Abdur Rahman
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute

Network Planning and Management, WCDMA for UMTS, WCDMA Radio Network Planning, Verification
of Dimensioning of Radio Network Planning, Radio Resource Utilization, WCDMA–GSM Co-Planning
Issues, Coverage and Capacity Enhancement Methods, UMTS Quality of Service, Analysis Methods and
Radio Access Network Auto tuning, concept of 3G Radio Access Technologies
Mobile Communication Networks
Mobile Communication Networks
This created by
MD. ARIF MIA
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute


Concept of mobile communication and network; Cellular concept and its initial implementations; Digital
cellular mobile systems; Cordless communications systems (CT2, DECT, PACS and PHS); Mobile data
communication systems; Third generation mobile communication system; telecommunication
management network (TMN) and signaling system; concept of TDMA cellular mobile communication;
concept of CDMA cellular mobile communication; Global mobile satellite systems; Numbers and
identities for mobile communication services; performance benchmarks for mobile; Traffic engineering
and tracking system.
New Content
Civil Engineering Drawing - 1
Subject Aims:
● To enable to understanding civil engineering drawing scale.
● To prepare simple building drawing
● To assist to understand the code & symbols used in civil engineering drawing .
● To enable to learning detail drawing of building components.
● To enable in learning detail drawing of different types of foundation, culvert, Road & truss.

Subject Outcomes:
● Civil engineering drawing scale.
● Drawing of single storied building.
● Code and symbols used in drawing.
● Detail drawing of different types of foundation ,flooring system in/c beam & slab, road, doors & windows, steel structure
Construction Process-1(66433)
OBJECTIVES:

At the end of course the students will be able to:
 Apply relevant theory and practice of concrete construction and its quality control
methods.
 Perform skills for construction work and Its supervision.
 understand the process, techniques and materials used in different types of masonry.

SHORT DESCRIPTION
Concrete, Brick masonry, Composite masonry, Foundation, Partition wall, Cavity wall.
Civil Engineering Materials (66421)
AIMS
• To be able to identify and classify the materials used for construction in civil engineering field.
• To be able to recognize the sources of various civil engineering materials.
• To be able to understand the characteristics of various civil engineering materials.
• To be able to understand the uses of different civil engineering materials.

SHORT DESCRIPTION
Aspects of engineering materials; Engineering uses of Stone; Bricks; Sand; Cement; Timber ; Aluminum
as construction materials; Timber & Wood based materials ; Glass and ceramics; Paints and varnishes;
Plastic materials ; Alloy & Mattel; Insulating materials; Geo-Textile ; Lime and water proofing
materials.
Structural mechanics (66441)
AIMS:
• To enable to apply the knowledge of scientific principles to problems of mechanical nature.
• To develop an understanding of mechanical properties of materials.
• To assist in applying mathematical and geometrical calculations to the analysis of statically
determinate beams.

SHORT DESCRIPTION
Mechanical properties of material; Laws of forces; Moment; Friction; Centroid and centre of gravity;
Moment of inertia; Torsion on circular shaft; Shear force and bending moment.
Foundation engineering (66465)
AIMS
 To be able to understand the foundation and foundation engineering.
 To be able to understand the soil stabilization.
 To be able to understand and the bearing capacity of soil.
 To be able to understand the factors determining types of foundation.
 To be able to understand the foundation on sand and non-plastic soil, plastic soil, non-uniform soil,
rock.
 To be able to understand the excavating and bracing.
 To be able to understand the sheet pile wall, cofferdam and bulk head.
 To be able to understand the damages due to construction operations.

SHORT DESCRIPTION
Foundation and foundation engineering; Factors determining the types of foundation; Soil stabilization;
Bearing capacity of soil; Foundation on sand and non-plastic silt; Foundation on clay and plastic silt;
Foundation on non-uniform soil; Foundation on rock; Excavation and bracing; Sheet pile, cofferdam &
bulkhead; Damages due to construction operations.
Fundamental Construction Process-66446
OBJECTIVES:
At the end of course the students will be able to:
 apply relevant theory and practice of concrete construction and its quality control methods.
 perform skills for construction work and its supervision.
 understand the process, techniques and materials used in different types of masonry, Floor, Doors &
Windows.

SHORT DESCRIPTION
Concrete, Brick masonry, Foundation, Painting & varnishing, Insulation, Floor, Doors, Windows.
Advance Surveying (66461)
At the end of the course my students will be Perform:
• My Students use to level and theodolite Machine Also Skills.
• My Students conduct to leveling work.
• My Students recognize to errors in leveling.
• My Students conduct to traversing with theodolite.
• My Students determine to horizontal and vertical distances of inaccessible points.
Civil Engineering Drawing -3 (66464)
To be able to develop knowledge, skill and attitude in the field of Civil Engineering Drawing with
Special emphasis on:
• Building Plan,
• detail drawing of staircase, Kitchen, Toilet
• Plumbing drawing, Electrical drawing,
• working drawing with Auto CAD
• Building Approval Sheet.
• Rendering,
• Layout and Plotting.
Textile Calculation -1 (1964)
CONDUCTED BY:
Emam Shad Ahmed
Instructor & Course Teacher
Department of Textile Engineering
Daffodil Polytechnic Institute

To develop basic knowledge of calculation about cotton spinning such as-

a) Blow room
b) Carding
c) Draw frame
d) Simplex
e) Ring frame.

To develop basic knowledge of calculation about different yarn numbering system & moisture relative of textiles.


SHORT DESCRIPTION:

Blow room calculation; Carding calculation; Drawing calculation; Simplex calculation; Ring frame calculation & calculation of yarn numbering.
Sewing Practices (5022)
CONDUCTED BY:
MD.ASFAKUR RAHMAN
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.

AIMS

To provide the students with an opportunity to develop knowledge, skill and attitude in the area of sewing practice with special emphasis on:
sewing needles and machines
stitch and seam
feed mechanism of sewing.

SHORT DESCRIPTION

Sewing needles; Sewing machines; Stitch; Seam and Feed mechanism of sewing.
Wet Processing-1 (1943)
Course Conducted by
Rumana Rashid Tandra
Instructor( Textile & GDPM)
Daffodil Polytechnic Institute.
This Course for: Diploma in Textile Engineering
Physics-1(5912)
To provide a foundation in scientific principals and processes for the understanding and application of technology. It will help our students to make a common base for further studies in technology and science. It also help to develop the basic knowledge of modern physics.
Wet Processing- 3
Course Conducted by
Rumana Rashid Tandra
Instructor (Textile & GDPM)
Daffodil Polytechnic Institute.
This Course for: Diploma in Textile Engineering
Optic Fiber Communications
Optic Fiber Communications (69461)
Created by
Abdur Rahman
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute

SHORT DESCRIPTION
Fiber optic communication; optical fiber waveguides; transmission characteristics of fiber optics; optical
fibers; optical fiber cables; optical fiber Joints; couplers and isolators; Optical source: LASER, LED;
Optical detection; Optical detector detection receiver performance; Optical amplification, wavelength
conversion and regeneration; intensity modulation/direct detection; Optical fiber measurements
Optical Networks.
(69441)Television Transmission And Reception
(69441)Television Transmission And Reception
Created by
Abdur Rahman
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute

SHORT DESCRIPTION
Television system, Working principles of TV cameras, picture tube, transmitters and receivers,
Television signal, Television Signal Generation, Transmission and Propagation, Modern Television –
Transmission and Reception, Advanced Television systems and digital studio equipments, Cable
Television, teletext broadcast services, Satellite home receiving system and its networking, Video
recording & play back (VHS, Bmax, U-matic , video 2000, DV and HDV), Storage system, Television
studio and Automation and Features of remote control
Networks, Filters & Transmission Lines (66841)
(66841)Networks, Filters & Transmission Lines
Created by
Abdur Rahman
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute

SHORT DESCRIPTION
Network theorems, Four terminal networks; Half section network; Attenuators and filters; Transmission line; Line
constant & impedance matching; Antenna; Propagation of radio wave; Effect of earth curvature & ionosphere on
wave propagation.
Electrical Appliance (66722)
OBJECTIVES
 To develop understanding and skill on the construction and operation of electrical appliances based on
heating principle.
 To develop understanding and skill on the construction and operation of appliances operated by electric
motor.
 To enable to acquire skill/competence in diagnosing/localizing faults and repairing & servicing of electrical
appliances.
SHORT DESCRIPTION
Electric iron; Electric heater; Rice cooker; Electric Kettle; Geyser; Electric fan; Rechargeable (Emergency)
lamp; Vacuum Cleaner; Blower; Dehumidifier; Blender; Washing machine; Refrigerator; Air conditioner;
Microwave oven
Certification icon
Transmission & Distribution of Electrical Power - 1 (66763)
Course Conducted By
Md.Shafikul Islam (Milon)
Head of the department
Electrical Technology.
Daffodil Polytechnic Institute

AIMS
My students will be able to acquire knowledge, skills and attitude in the area of transmission and distribution electrical power with special emphasizes on:
 Transmission and distribution systems of electrical power.
 Comparison of different types of transmission and distribution systems.
 Electrical and Mechanical design of overhead lines.
 Survey of transmission and distribution line routes.
 Voltage regulation and Efficiency of transmission lines.

SHORT DESCRIPTION

Different systems of transmission; Aspect of transmission system; Mechanical design of overhead lines; support of overhead lines; conductors & conductor materials; Insulators; Effect of sag; Methods for survey of transmission/distribution line route; Voltage distribution of suspension insulator; Corona; Erection of poles and drawing of conductors of overhead lines; Electrical design of overhead line; Resistance of the line conductor; Skin effect of transmission line; Effect of inductance on transmission line; Effect of capacitance of overhead transmission line; Voltage regulation and efficiency of short transmission line.

Certification icon
Social Science - 1 (5811)
Subject Aims:

To provide the opportunity to acquire knowledge and understanding on:
Importance of civics and its relationship with other social sciences.
The relationship of an individual with other individuals in a society
Social organizations, state and government,
Rule of law, public opinion and political parties
UNO and its roles
The basic concepts and principles of economics and human endeavor in the economic system
The realities of Bangladesh economy and the current problems confronting the country
The role of Diploma Engineers in industries
Occupations and career planning for Diploma Engineers

Subject Outcome:

Civic and Social Sciences; Individual and Society; Nation and Nationality; Citizenship; state and government; Law; Constitution Government and its organs; public Opinion; Political Party; UNO And its organs; Scope and importance of Economics; Basic concepts of Economics- Utility, Wealth, consumption, income wages and salary and savings; Production- meaning, nature, factors and laws; demand and supply; Current economic problems of Bangladesh; Role of Diploma engineers in the economic development of Bangladesh; Occupations and career planning; Engineering team.

(66867) COMMUNICATION ENGINEERING
(66867) COMMUNICATION ENGINEERING
Created by
Abdur Rahman
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute.

SHORT DESCRIPTION
Communication networks; Modulation; Demodulation Receiver and Transmitter; Telephone system;
Digital communication; Communication switching system; Optical fiber; Satellite communication; Digital
Communication, Modem and mobile communications.
Basic Electricity (26711)
Basic Electricity
Created by
Abdur Rahman
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute.

AIMS
• To familiarize the basic electrical quantities & laws and to apply them in solving problems of electrical circuits.
• To acquaint with electro-chemistry, electro-magnetism, electro-magnetic induction and electrostatic.
• To develop skill in electrical wiring.
• To appreciate the safety measures to be taken for electrical wiring.

SHORT DESCRIPTION
Electric current and ohm's law; conductors and insulators; basic electrical circuits; power and energy; basic electro-chemistry; electro-magnetism; electro-magnetic induction; electrostatics; wires and cables; hand tools used in wiring; house wiring; controlling devices; protective devices; earthing.
Civil Engineering Drawing (CED-2): 66443
Course Conducted By
Md. Asaduzzaman Russel
Daffodil Polytechnic Institute
This course is for: Diploma in Engineering (AIDT 4th Semester)

Objectives of the Course:
• To enable in learning detail drawing of building components.
• To enable to understand and perform computer-aided design (AutoCAD).
• To be able to prepare a production drawing of a multi‐storied building.
• To be able to prepare detail drawing of building components.
• To be able to acquire knowledge and skill to prepare detail working drawing of a scheme.
• To be able to interpret the structural drawings of a multi‐storied building.
• To be able to prepare production drawings of multi‐storied buildings adopting CAD.

Short Description:
Computer-Aided Design (CAD) and plotting; 2D & 3D CAD commands; Multi‐storied building (CAD); Detail working drawing (CAD) of RCC column with footing; Lintel with sunshade; Retaining wall; Foundation, Beam, Slab, Staircase, ramp and lift core; Underground water reservoir; Septic tank.
Environmental Management(5840)
AIMS:
The aims are to enable candidates to acquire: • knowledge of natural systems which make life possible on Earth • an understanding that humans are part of these systems and depend on them • an appreciation of the diverse influences of human activity on natural systems • an awareness of the need to manage natural systems • an understanding of sustainable development to meet the needs of the present, without compromising the ability of future generations to meet their own needs • a sense of responsibility and concern for the welfare of the environment and all organisms • an awareness of their own values concerning environmental issues • an awareness of the values of others • a willingness to review their own attitudes in the light of new knowledge and experiences • a sound basis for further study, personal development and participation in local and global environmental concerns.

SHORT DESCRIPTION:
Basic concepts of environment; Ecology & eco-systems; global environmental issues Air and atmospheric layers; Air pollution sources & effects; climate change, green house effect and depletion of ozone layer; Control of air pollution; Water pollution sources & effects; Monitoring of water pollution; Waste water treatment; Sound pollution and its control; Soil pollution and its management; Radioactive pollution and its control; Solid waste management; Major environmental issues and disaster management- Arsenic pollution; Pesticides pollution and its management, Environmental legislations and guidelines frame work and policy in Bangladesh.
Telecommunication Fundamentals
Course Conducted By
MD. ARIF MIA
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 2nd Semester)
Objectives of the Course
After completion of the course students will be able to:

Basic Telephony (1G, 2G, 3G, 4G,LTE And UMTS)
o Wireless and Cellular/Mobile Radio
o Wi-MAX, Wi-Fi, VOIP, PCS
o Local and Long-Distance Communications
o Image Communications
o Transmission Media , Media Gateway Control Protocol
o Telephone switching
o Voice over Internet Protocol (VoIP) and VoIP Gateway
o Telephony and Telegraph system, (NWD, ISD and PSTN)
o Telecommunication standardization organization
o OSI Model
o Bangladesh Telecommunication Regulatory Commission , function , Acts, mission and vision of BTRC
Digital Electronics (66834)
Course Conducted By
MD. ARIF MIA
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 4th Semester)
Objectives of the Course
After completion of the course students will be able to:
You will get concept of digital electronics; Logic gates, Boolean algebra and logic simplification &Combinational logic circuits.
Wireless Communication & Networking
Course Conducted By
MD. ARIF MIA
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 6th Semester)
Objectives of the Course
After completion of the course students will be able to:
Introduction to Wireless communication, Modern wireless communication system, third generation(3G) wireless
network, fourth generation(4G) wireless network, cellular network, Amplitude Modulation(AM), Frequency
Modulation(FM), Linear Modulation technique, Constant envelope modulation technique, equalization, diversity
and channel coding, polarization diversity, frequency diversity, time diversity, different types of multiple access,
packet radio protocols, several types of wireless network, wireless system standard and 4th Industrial Revolutions.
Microwave and Antennas
Course Conducted By
MD. ARIF MIA
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 6th Semester)
Objectives of the Course
After completion of the course students will be able to:

Concept of Microwave, Microwave components; Wave guide; Microwave tubes; Microwave
measurements; Semiconductor microwave devices; Propagation models: Microwave antenna.
Transportation Engineering-1
Subject Teacher : Md. Nur Alam, Instructor
Subject Name : Transportation Engineering-1
Subject Code : 66462
Technology : Civil
Semester : 6th

Subject Aims:

• To be able to understand the standard types of construction used in Bangladesh for road & pavement, bridge
& culvert to assess the advantages and disadvantages of each type.
• To be able to understand the procedure, methods & techniques used in Construction of road & pavement,
Drainage system, bridges & culverts, Embankment & cuttings.
• To be able to understand the importance of traffic control system.
• To be able to understand the maintenance, servicing & repair procedure, methods & techniques used to keep the highway operational.
• To be able to acquaint with the different aspects of airport construction.
Subject Outcome:
Modes of transportation and history of road development; Highway planning; Road Alignment and survey; Highway geometrics; Sub-grade soil; Highway materials, Construction of road formation & classification of road; Low cost road; Water bound macadam road; Bituminous road; Cement concrete road; Hill road; Highway drainage; Traffic control; Road arboriculture; Highway machinery; Highway failures & maintenance; Highway bridges & culverts; Planning of airport; Geometric standard in airport, airport building & warehouses.
Geotechnical Engineering
Subject Teacher : Uchingla Marma Rupu , Instructor
Subject Name : Geotechnical Engineering
Subject Code : 66445
Technology : Civil
Semester :4th

Subject Aims:

At the end of the course the student will be able:
Our students will able to know about the soil.
They will learn how to determine various soil.
They also can know about various property of soil.
They can know about the compaction system of the soil.
They will know about the bearing capacity of soil

Subject Outcome:
Introduction to geotechnical engineering; Preliminary definition and simple tests; Particle size of soil; Plasticity characteristic of soil; Hydraulic properties of soil; Consolidation characteristics of soil; Subsurface investigation; Lateral earth pressure; Bearing capacity of soil.
Garments production planning and control (5064)
CONDUCTED BY:
MD.ASFAKUR RAHMAN
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.

Aims :
To be able to understand the planning of garments production and control.
To be able to acquire knowledge of material and inventory management of garments industry.
To be able to understand the garments tools of planning and material handling.
To be able to develop knowledge of garments product and service design.
Short Description

Understand the basic aspects of Production planning; Tools of planning; Materials handling; Product and service design; Material management; Inventory management; Scheduling.

Certification icon
Object Oriented Programming
Course Conducted by
Alamin Hossain
Instructor,
Daffodil Polytechnic Institute.
This Course for Diploma in Computer Technology

Subject Aims:
● To develop knowledge and skill in Object Oriented Programming (OOP).
● To develop knowledge and skill on C# language as OOP, its syntax, keywords and programming.
● To develop knowledge on the .Net Framework.

Subject Outcome:
⮚ Codes basic programs in C# programming language;
⮚ Uses objects and classes;
⮚ Lists the object-oriented programming concepts;
⮚ Names special functions;
⮚ Codes object-oriented programs;
⮚ Explains and handles exceptions;
⮚ Uses generic classes and methods;
Principles of Software Engineering
Course Conducted by
Alamin Hossain
Instructor,
Daffodil Polytechnic Institute.
This Course for Diploma in Computer Technology

Subject Aims:
• To study the approaches of application of engineering to software.
• To develop knowledge and skill to apply the systematic, disciplined, quantifiable approach to the
development, operation and maintenance of software.

Subject Outcome:
⮚ Concept of Software Engineering
⮚ Basics of Software Development Life Cycle (SDLC)
⮚ Project Management
⮚ Software Requirements Analysis
⮚ Basics Design, Analysis, Tools & Strategies
⮚ User Interface Design
⮚ Understanding Of Design Complexity
⮚ Software Implementation, Testing And Quality Assurance
⮚ Software Maintenance & CASE.
Art of Living
Developed by:
Md. Sabur Khan &
Syed Mizanur Rahman
Daffodil International University
CAD-1 (68742)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 4th Semester)

Subject Aims:
After completion of the course students will be able to:
❖ Drawing environments and drawing aids.
❖ Different setup of drawing in Auto CAD.
❖ Drawing commands. • Modification & edits of drawing.
❖ Printing the drawing elements.

Subject Outcome:
● Student will know About Drawing environments and drawing aids.
● Can ensure different setup of drawing in Auto CAD.
● Learn about Drawing commands.
● Can be able to Modification & edits of drawing.
● Can Practice how to Print the drawing elements.

Air Conditioning & Acoustics(68764)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 6th Semester)

Subject Aims:
After completion of the course students will be able to:
❖ To be able to understand the fundamental of air condition.
❖ To be able to understand the construction procedure of air condition syste
m.
❖ To be able to understand the fundamental of architectural acoustics.
❖ To be able to prepare materials schedule, cost and development process.
Subject Outcome:
▪ Student will know about Materialsfor air conditioning system.
▪ Will learn the list of Acoustics materials.
▪ Can Design false ceiling.
▪ Knowing Aboutsound absorption.
▪ Can learn about auditorium acoustics etc.
▪ Can Estimate the Cooling & heating load after calculation. K, C, R & U factor.
▪ Will be able to design varioustypes of lighting
Interior Working Drawing-2 (68762)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 6th Semester)

Subject Outcome:
 To be able to understand
 The working drawing of residential building plan procedure,
 The working drawing of residential building furniture drawing procedure,
 The working drawing on kitchen & toilet with fixture & fittings,
 The working drawing of false ceiling,
 Wall partition
 Cabinet and floor and materials.

Web Development(66643)
Short Description:
This unit covers knowledge, skills and attitudes required to -
 Create and manage rich web content including jQuery plugins, images, CSS3 animation, audio and video within
a website.
 To enter dynamic features for the Client Side Dynamic Web page using jQuery and check the completed
website for accuracy using common browsers.
 get the benefits of reusability in design and development and understand how grid works and how to use them in
mobile and responsive web design and development
 understand the design of single-page applications and how AngularJS facilitates their development and
elegantly implement Ajax in AngularJS applications
 Properly separate the model, view, and controller layers of your application and implement them using
AngularJS
 Gain the PHP programming skills needed to successfully build interactive, data-driven sites
Basic Estimating & Costing (66447)
Introduction to estimating, Quantity estimation of excavating tank, road embankment, canal digging,
Steps, boundary wall, bituminous & RCC road, estimate of a single storied two-roomed building with
Verandah and double storied building, rate analysis.
Surveying -2
Leveling; Errors in leveling; Contouring; Theodolite traversing, Trigonometrical leveling and Topographic surveying.
Micro-controller And PLC (66868)
AIMS
To provide the students with opportunities to acquire knowledge, skills and attitude in the area of Microcontroller and PLC emphasizes on:
The Fundamentals of microcontroller.
The features of the 8051 microcontroller.
The architecture of 8051 microcontroller.
Develop C language program for the 8051 microcontroller.
Understand I/O port Programming.
Understand the Timer and Counter of the 8051.
Interfacing LCD and Real world devices.
Relay logic control Ladder diagram elements and programming.
SHORT DESCRIPTION
Fundamentals of microcontroller, hardware of 8051, instruction set, Assembly language programming, C programming, Timer, Interrupt, DC motor interfacing, Stepper motor interfacing, interfacing LCD display, Relay logic control, Fundamentals of PLC, PLC ladder diagram programming, Inter relay, Jump and Call, Timer and Counter.
Personality Development & Etiquette
Course Conducted By:
Imunnahar Shorna

Subject Aims:
This is an introduction to the basic concepts and topics in personality Development and Etiquettes. It focuses on three levels: Individual, Interpersonal, and collective managing change.

Subject Outcome:
The objectives of this module are to prepare the students for the overall development of students in order to mold them towards the challenges in the industry & society. Positive Body Language Skills, Attitudinal Development, Grooming & power dressing, resume writing, Extempore & Public Speaking, Modules on Leadership & Teamwork, Participative Learning, etc.
TEXTILE TESTING & QUALITY CONTROL (5045)
CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute

Subject Aims:
Basic aspects of textile testing, humidity, moisture in textiles, sampling, identification of textile fibers, fiber length & its measurement, fiber strength & its measurement, Trash, naps & their measurement, fiber fineness &its measurement, micromere value, fiber maturity

Subject Outcome:
Students will be understood with an opportunity to acquire knowledge & skill about Testing,
Techniques & System of Testing. The operating system of different modern Testing instruments,
Interpretation & Analysis of testing data use & Maintenance of testing instruments.
Apparel Testing (5063)
Course Conducted by
Rumana Rashid Tandra
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in GDPM
Garments Manufacturing-3
Course Conducted by
Rumana Rashid Tandra,
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in GDPM Technology
Principle of Digital Electronics
Md. Husne Fahad
Instructor
Electrical
Daffodil Polytechnic Institute

AIMS
 To develop knowledge & skill on number systems, codes and binary arithmetic operation.
 To provide knowledge & skill on logic gates, logic circuits, Boolean algebra and logic families.
 To assist to acquire the knowledge & skill on combinational logic circuit.
SHORT DESCRIPTION
Basic concept of digital electronics; Number system & codes; Logic gates, Boolean algebra
and logic simplification &Combinational logic circuits.
Electrical Circuits ‐2
Conducted by
Md. Husne Fahad
Instructor
Electrical Department
Daffodil Polytechnic Institute

Objectives
After completion of these contents students will be able to acquire, achieve and develop:
 To provide knowledge and skill (to apply complex algebra) for AC circuits.
 To acquire knowledge and skills on resonance by varying inductance, Capacitance and frequency.
 To develop concept on Poly phase balanced power system.
 To achieve skills in measuring line and phase quantities in three phase supply.
 To assist in acquainting the concept of poly phase unbalanced power system.
 To develop the concept of non-sinusoidal waves.
SHORT DESCRIPTION
Complex algebra − application to AC circuits; RLC Parallel circuits; Expression for power and VAR; series resonance;
Parallel resonance ; Poly phase system – 3-phase interconnection; Star connected system; Delta connected system;
Balanced Power System; Unbalanced power system; Non-sinusoidal waves.
Programming Essentials-66631(Python)
# To develop knowledge and skill on programming Basics.
# To develop knowledge and skill to create, compile, debug & execute a program.
Clothing 1 (1954)
CONDUCTED BY:
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute

AIMS
To enable the student a clear idea of garments.
To develop basic knowledge and skill of garment cloth.
To develop basic knowledge of garment accessories.

SHORT DESCRIPTION:
Garments; Garment accessories; Tailoring process; Patternmaking; Marker; Cutting machines; Fabric spreading; Seam & sewing.
General Textile Processing-I (21111)
CONDUCTED BY:
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute

After undergoing the subject, students will be able to:
 Identify machineries of cotton and jute yarn manufacturing.
 Identify process sequence for cotton and jute fibers.
 Identify grading, batch, batching, emulsion preparation and softening for jute yarn manufacturing.
 Determine winding packages.
 Identify warp beams.
 Demonstrate power looms.
 Identify maintenance tools and their uses.
 Observe machine gears
Social Science 25811
Civic and Social Sciences; Individual and Society; Nation and Nationality; Citizenship; state and government; Law; Constitution Government and its organs;
public Opinion; Political Party; UNO And its organs; Scope and importance of Economics; Basic concepts of Economics- Utility, Wealth, consumption, income
wages and salary and savings; Production- meaning, nature, factors and laws; demand and supply; Current economic problems of Bangladesh; Role of Diploma
engineers in the economic development of Bangladesh; Occupations and career planning; Engineering team.
Interior Working Drawing -1(68752)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 5th Semester)

To be able to draw the working drawing of living room, dining room, bedroom.
To be able to draw the working drawing of kitchen, toilet.
To be able to draw the working drawing of a 2bedroom house.
To be able to draw the working drawing of door and window.
Mathematics-1 (All Technology)
Course Conducted by
S. M. Abul Kalam Azad
Instructor,
Daffodil Polytechnic Institute.

This Course for: Diploma in Engineering (1st Semester)
Course Aims:

To acquaint the students with the basic terminology of Algebra.
To be able to understand the complex numbers which are being used in electrical engineering.
To be able to understand the binomial expansion.
To be able to use the knowledge of trigonometry in solving problems of engineering importance.

Course Outcome:
Students will able to learn about Algebra and Trigonometry by studying this subject.
Detail discussions in Algebra will be: AP & GP, Polynomials & polynomial equations, Complex number, Permutation & Combination, Binomial
Theorem for positive integral index and negative & fractional index.
Detail discussions in Trigonometry will be: Ratio of associated angles, Compound angles, Transformation formulae, multiple angles and Submultiple angles.
Physics-2 (65922 & 5922)
To provide a foundation in scientific principals and processes for the understanding and application of technology. It will help our students to make a common base for further studies in technology and science. It also help to develop the basic knowledge of modern physics.
Introduction To Finance
Designed to impart financial literacy to readers with no previous background in the subject, the text provides a solid foundation for students to build upon in later courses in financial management, investments, or financial markets. Equations and mathematical concepts are kept to a minimum, and include understandable, step-by-step solutions.
Electrical Installation Planning and Estimating (66741)
Course Conducted By
Md.Shafikul Islam (Milon)
Head of Department
Electrical Technology.
Daffodil Polytechnic Institute

Aim
To provide the student with an opportunity to acquire knowledge, skill, and attitude in the area of planning and
estimating electrical installation with special emphasis on:
• Planning and preparation of estimate for an electrical installation.
• Internal wiring and service connection.
• Installation of electrical machines.
• Electricity act/rules and safety practices.

Outcome
Students will be able to know about Planning and estimating;
They will be able to know how to use the Measurement book,
They will be able to understand the importance of price sheet, catalog, and schedule of labor rate;
They can calculate the Illumination;
They will be able to choose Conductor size and can calculate the current carrying capacity;
They will be able to know Electricity Acts/Rules; Electrical codes;
They will be able to perform Internal wiring installation;
They can estimate for Distribution line;
They can perform winding of electrical machine
They will be able to Test the electrical installation.
Accounting Theory And Practice
Accounting Theory And Practice (65851) / Bookkeeping And Accounting (5851)

 To be able to understand the principles and practices of book keeping and accounting.
 To be able to understand the procedures of general accounting, financial accounting and their applications.
 To be able to understand the concept of income tax, VAT and Public works accounts.

SHORT DESCRIPTION
Concept of book keeping and accounting; Transactions; Entry systems; Accounts; Journal; Ledger; Cash Book; Trial Balance; Final Accounts; Cost Account and Financial Accounting; Income Tax; Public works Accounts.
Industrial Management (65852)
Industrial Management (65852)

* To be able to develop the working condition in the field of industrial or other organization.
* To be able to understand develop the labor management relation in the industrial sector.
* To be able to develop the management techniques in the process of decision making.
* To be able to manage the problems created by trade union.
* To be able to understand planning.
* To be able to perform the marketing.
* To able to maintain inventory.

 SHORT DESCRIPTION
Basic concept of management; Principles of management; planning, Organization, Scientific management; span of supervision; Motivation; Personal Management & human relation ; Staffing and manpower planning; Training of Staff; Concepts and techniques of decision making; Concept of Leadership; Concept of trade union; Inventory control; Economic lot size; Break even analysis; Trade Union and industrial dispute, Marketing.
New Content
Textile Testing & Quality Control- 1 (1944)
CONDUCTED BY:
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute

Subject Aims:
Basic aspects of textile testing, humidity, moisture in textiles, sampling, identification of textile fibers, fiber length & its measurement, fiber strength & its measurement, Trash, naps & their measurement, fiber fineness &its measurement, micromere value, fiber maturity

Subject Outcome:
Students will be understood with an opportunity to acquire knowledge & skill about Testing,
Techniques & System of Testing. Operating system of different modern Testing instruments,
Interpretation & Analysis of testing data uses & Maintenance of testing instruments.