All Courses

CONDUCTED BY:
Md.Ashikur Rahman
Instructor
Department of Textile Engineering and GDPM
Daffodil Polytechnic Institute

INTENTION
Our students will be able to develop knowledge, skill, and attitude in the field of garments manufacturing with special emphasis on:
 textile raw materials.
 different natural textile fibers.
 different natural fibers properties.
 natural filament yarn production.

SHORT DESCRIPTION ABOUT BOOKS STUDIES:
To understand the basic concepts of Cotton fibers; Jute fibers; Linen and Hemp fiber; Sisal and coir fibers; Wool fibers; Silk fibers.

Course Conducted by
Md. Emon Khan.
Jr. Instructor,
Daffodil Polytechnic Institute.

This Course for: Diploma in Engineering (5th Semester Civil)

AIMS
After completion of the course the students will be able to:
 Understand the construction process of arch and lintel.
 Understand the construction process of different types of floor.
 Understand the construction process of stairs.
 Understand the construction process of different types of roof.
 Understand the different finishing works in building.
 Understand the construction process of doors and windows.
 Understand the different operation and maintenance construction equipment.
 Understand the construction of bridge, culvert, canals etc.

SHORT DESCRIPTION
Arches; Lintels; Ground floors; Upper floors; Damp proofing; Termite treatment; Stairs; Roof; Pitched
roof; Plastering and pointing; Doors; Windows; Carpentry and joinery; Scaffolding; Form works, Pointing
& Varnishing, construction equipment, Building Services, Insulation, bridge/culverts and canals etc.

Course Conducted by
Md. Emon Khan
Jr.Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (6th Semester,Civil)

AIMS
• To provide understanding on the influence of the climatic condition of Bangladesh on its ground
water and surface water flow
• To provide understanding of recharging of underground water and ascertain its necessity in
Bangladesh.
• To enable to select a suitable source of water and method of irrigation for particular situation.
• To enable to select a suitable method of drainage for particular situation.
• To enable to select a suitable method for control of rivers and flood in Bangladesh.
• To understand rain water harvesting.

SHORT DESCRIPTION
Sources of water; Rainfall and run-off; Lifting of underground water; Storing and Recharging of
ground/rain water; Irrigation and its effect; Well irrigation; Water requirements for crops; and quality
of irrigation water; Storage reservoir; Dam and dyke; Irrigation canals; Silt deposit; Scouring; Canal
works; Drainage; River training works; Flood and flood management and flood control; Irrigation
projects in Bangladesh.

Course Created By
Asif Shahriar
Instructor, Textile & GDPM
Daffodil Polytechnic Institute

AIMS :
● To develop the basic knowledge required for structural design of fabric.
● To develop the skill of the student in textile design.
● To familiarize the student with different Plain & Twill weave.
● To acquire knowledge of different structured fabrics.

SHORT DESCRIPTION :
Basic concept of Textile design; Artistic design; Drafting & lifting plan; Weave plan; Plain weave; Twill weave; Diamond; Diaper; Broken twill; Stepped twill & standard commercial fabrics.

CONDUCTED BY:
Md.Ashikur Rahman
Department of Textile Engineering
Daffodil Polytechnic Institute

Subject Aims:

1. To develop the basic knowledge regarding Fabric manufacturing
2. To develop knowledge & skill about different motions
3. To acquire knowledge to make different fabric shedding mechanisms, stop motion
Subject Outcome:1. To know the process of fabric manufacturing
2. Understand properly the process of stop motions, and shedding mechanisms.

CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute

To develop basic knowledge of calculation about cotton spinning such as-

a) Blow room
b) Carding
c) Draw frame
d) Simplex
e) Ring frame.

To develop basic knowledge of calculation about different yarn numbering system & moisture relative of textiles.


SHORT DESCRIPTION:

Blow room calculation; Carding calculation; Drawing calculation; Simplex calculation; Ring frame calculation & calculation of yarn numbering.

Regarding textile fabric design

CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.

Offset machine operation is a critical process in the printing industry, involving several meticulous steps to ensure high-quality results. Initially, the machine is prepared by collecting job information and setting up the machine according to this data. The inking unit is controlled by measuring pH levels, roller hardness, and adjusting the roller gap to regulate ink supply. The feeding unit is then prepared by setting the sucker and blower, adjusting guides, and maintaining the feed board height. Sheet control involves setting various lays, measuring paper thickness, and adjusting the double sheet detector. Plates and blankets are cleaned, prepared, and preserved to ensure quality. During the printing process, the press is made ready, run for production, and cleaned as needed, with strict control over print registration for multi-color jobs. Safety measures are followed meticulously, raw materials are handled carefully, and management plays a crucial role in accident prevention. Finally, the delivery unit is set up by adjusting guides and maintaining the delivery chain gripper. Detailed record-keeping throughout these steps is essential for consistent and high-quality printing outcomes.

Image Carrier preparation refers to the processes and techniques involved in creating the medium on which images will be printed using various printing technologies. The preparation process varies depending on the type of printing method being used, such as relief printing, planographic printing, intaglio printing, and screen printing. Each method requires specific materials, tools, and steps to ensure the quality and accuracy of the printed image.

### Types of Image Carriers and Their Preparation

1. Conventional Relief Printing:
involves preparing block and type forms.
uses materials like rubber and photopolymer plates.
Processes include making line blocks and half-tone blocks and handling photopolymer and rubber plates.

2. Modern Relief Printing:
utilizes digital flexo plates and various digital imaging technologies.
involves the use of digital imagers (DI) and different types of lasers for plate making.

3. Conventional Planographic Printing:
uses lithographic plates and involves the photomechanical process.
requires materials like Ps plates and involves graining processes to prepare the plate surface.

4. Modern Planographic Printing:
employs Employs Computer-to-Plate (CtP) technology and various digital imaging techniques.
includes auto plate exposure, processing of digitally imaged plates, and maintenance of image and non-image areas.

5. Intaglio Printing:
involves materials and equipment for gravure image preparation.
Processes include electroplating gravure cylinders, etching, and engraving.

6. Screen Printing:
utilizes raw materials, tools, and equipment for stencil making.
Methods include direct and indirect stencil making and Computer-to-Screen (CtS) processes.

### Learning Outcomes

**Theoretical:**
Understand image preparation processes for different printing technologies.
Differentiate between various types of image carriers.
Know the raw materials and chemicals used in image preparation.
Solve problems related to image preparation using different printing methods.

**Practical:**
Apply the tools and equipment used in screen printing.
Prepare various types of stencils and print on different substrates.
Operate screen-printing machines and presses.

These processes are essential for ensuring high-quality prints in various printing applications, from commercial printing to specialized artistic productions】.