All Courses

 To enable to calculate the areas of regular polygons, hexagons, octagon, hydraulic mean depth (HMD) of a
channel, area occupied by water of circular culvert. Excavation work.
 To provide the ability to calculate volume of regular solids like pyramid frustum of pyramid, prismoid,
wedge and area of curved surfaces.
 To enable to use the knowledge of gradient of a straight line in finding speed, acceleration etc.
 To enable to use the knowledge of conic in finding the girder of a railway bridge, cable of a suspension
bridge and maximum height of an arch.

 SHORT DESCRIPTION
Menstruation: Area of rectangles, squares, triangles, quadrilaterals, parallelograms, rhombus, trapezium, circle,
sector, segment; Volume of rectangular solids, prism, parallelepiped, pyramids, cones, spheres, frustum of pyramid
and cone; Area of curved surface of the prism, Cylinder cone, pyramid and frustum of cone.
Co-ordinate Geometry: Co-ordinates of a point, locus and its equation, straight lines, circles and conic.
Calculus: Differential equation, Laplace transformation

CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute

Course Conducted By
Shanta Islam
Instructor
Architecture Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering Architecture 6th semester

Subject Aims:

• Students able to develop knowledge, skill and attitude in the field of Computer Rendering & Animation (Sketch up)
• With special emphasis on students understand drawing environments and drawing aids.
• Students can understand different setup of drawing in Sketch up.
• Students can drawing commands, modification & edits of drawing.
• Students can know about V‐Ray, printing the drawing elements.

Subject Outcome:

• Students will understand the drawing environments and drawing aids.
• Students will know different setup of drawing in Sketch up.
• Students will learn drawing commands.
• Students can use modification & edits of drawing; camera, material assign, lighting setup.
• Students can use V‐ray; camera, lighting, Rendering etc.

CONDUCTED BY:
Asif Shahriar
Department of Textile Engineering
Daffodil Polytechnic Institute

INTENTION

 To develop basic knowledge regarding the preparatory process of fabric manufacture.
 To develop the skill of the students, in the weaving preparatory process.
 To familiarize the students, with different types of loom.
 To provide skill on the basic concept of knitting.

SHORT DESCRIPTION OF BOOKS STUDIES:
The basic concept of fabric weaving processes like winding; Warping; Sizing; Denting & drafting; Read & heald count; Weaving; Power loom; Loom motion & basic idea of knitting

CONDUCTED BY:
Asif Shahriar
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute

Course Conducted By
Lima Akter
Jr. Instructor
Architecture Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (Architecture 6th Semester)

Objectives of the Course
After completion of the course students will be able to:
❖ Acquire knowledge and skill with understanding basic terminology used by architects and interior designers.
❖ Understand design process of a residence.
❖ Understand color of a residence.
❖ Understand Texture of a residence.
❖ Understand materials of a residence.
❖Identify the function of interior design to be able to understand the construction procedure of air condition system.
❖Verify Fundamental of this entire process is a working knowledge of construction materials
❖Plays a significant role in creating comfortable living or working environments.

CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute

INTENTION OF THIS COURSE:
• Our student will develop understanding and skill on operating different sewing machine. sewing of garments by using different types of sewing machine
• Our student can operating different sewing machine.
• Our student can get knowledge of different work aid of sewing machine.
• Our student can get knowledge of Interlining.
• Our student can get knowledge of Garments Finishing.
• Our student can get knowledge of care level code.

After completing the Course student will have knowledge about different sewing machine, sewing of garments by using different types of sewing machine, knowledge of different work aid of sewing machine, Interlining, Garments finishing & Garments care level code.

Telecommunication Basic(69411)
This created by
Abdur Rahman
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute

Telecommunication and its background; Terms of Communication; Signals and Systems; Communication
Frequency and Spectra; Modulation and Demodulation; Multiplexing/ De-multiplexing; Multiple Access
Techniques; Radio transmitter; Radio receiver; Network; Internet.

CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute

AIMS
To enable the students with an opportunity to acquire knowledge, skill and attitude in the area of yarn manufacturing with special emphasis on
• Roving Frame/Speed frame/Simplex
• Ring frame
• Conditioning
• Winding
• Reeling
• Bundling and baling
• Waste

SHORT DESCRIPTION
The basic concept of ring-spinning frame; Component parts of the ring-spinning frame; Drafting and roller setting; Ring, traveler & spindle of ring-spinning frame; Faults, change places and waste in spinning; Conditioning of yarn; Winding; Reeling; Bundling and baling; jute spinning frame; Draft & Twist of spinning frame; Building & winding; Technical aspects of spinning frame; Waste in cotton spinning.

Digital Communication(69451)
This created by
Abdur Rahman
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute

Introduction to digital communication, modulation technique; Pulse modulation; Pulse amplitude
modulation; Pulse width modulation; Pulse code modulation; Digital communication; Multiplexing in
communication system; Coder; Error detection and correction using block codes; Multiple access
techniques; Terrestrial radio communication system; Radio wave propagation; Electronic mail and
document communications.

CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute

To develop basic knowledge of calculation about cotton spinning such as-

a) Blow room
b) Carding
c) Draw frame
d) Simplex
e) Ring frame.

To develop basic knowledge of calculation about different yarn numbering system & moisture relative of textiles.


SHORT DESCRIPTION:

Blow room calculation; Carding calculation; Drawing calculation; Simplex calculation; Ring frame calculation & calculation of yarn numbering.

Course Conducted by
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.

To provide a foundation in scientific principals and processes for the understanding and application of technology. It will help our students to make a common base for further studies in technology and science. It also help to develop the basic knowledge of modern physics.

Course Conducted By
Md.Husne Fahad
Instructor
Electrical Technology.
Daffodil Polytechnic Institute

AIMS
My students will be able to acquire knowledge, skills and attitude in the area of transmission and distribution electrical power with special emphasizes on:
 Transmission and distribution systems of electrical power.
 Comparison of different types of transmission and distribution systems.
 Electrical and Mechanical design of overhead lines.
 Survey of transmission and distribution line routes.
 Voltage regulation and Efficiency of transmission lines.

SHORT DESCRIPTION

Different systems of transmission; Aspect of transmission system; Mechanical design of overhead lines; support of overhead lines; conductors & conductor materials; Insulators; Effect of sag; Methods for survey of transmission/distribution line route; Voltage distribution of suspension insulator; Corona; Erection of poles and drawing of conductors of overhead lines; Electrical design of overhead line; Resistance of the line conductor; Skin effect of transmission line; Effect of inductance on transmission line; Effect of capacitance of overhead transmission line; Voltage regulation and efficiency of short transmission line.

Course Conducted By
MD. Badeuzzamal Sarker
Instructor
Electrical Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (CMT 4th Semester)
Objectives of the Course
After completion of the course students will be able to:
You will get concept of digital electronics; Logic gates, Boolean algebra and logic simplification &Combinational logic circuits.

Course Conducted by
Asif Shahriar
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in GDPM

Course Conducted by
Sabina Yasmin Koli
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in GDPM Technology

CONDUCTED BY:
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute

Subject Aims:
Basic aspects of textile testing, humidity, moisture in textiles, sampling, identification of textile fibers, fiber length & its measurement, fiber strength & its measurement, Trash, naps & their measurement, fiber fineness &its measurement, micromere value, fiber maturity

Subject Outcome:
Students will be understood with an opportunity to acquire knowledge & skill about Testing,
Techniques & System of Testing. Operating system of different modern Testing instruments,
Interpretation & Analysis of testing data uses & Maintenance of testing instruments.

Course Conducted By
Nishat Akter Munia
Jr. Instructor
Architecture Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering(6th Arch)

Landscape design course aims to make students understand how to consider impact of built environment while designing different types of site and waterbody. Main focus of the course is to enable students to get into the decision making process considering aspects of more environmental based layouts. Major emphasis of the course includes sitedesign development and topographic view. Student will understand institutionalstructures in the context of Bangladesh climate and context along with formal expression of the soil structure. Importance should be given to building materials and technology and be able to design innovative ideas that respond to the need of the landscape.

Course Conducted By
Shanta Islam
Instructor
Architecture Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering Architecture 2nd semester

Objectives of the Course
After undergoing the subject, students will be able to:

Learning Outcome (Theoretical):
 Understand Architectural terminology.
 Familiar with Building components.
 Explain Plan, Elevation, Section.
 Explain Different circulations.
 Describe Design principals.

Learning Outcome (Practical):
After undergoing the subject, students will be able to:
 Draw Architectural Drawing.
 Draw Plan, Elevation, Section.
 Draw detail drawings.
 Design single room house.
 Draw Building component.
 Draw and Differentiate the Similar terms of building.

CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute

Conduct By
Sabina Yasmin
Instructor
Department of Textile & GDPM
Daffodil Polytechnic Institute

Course Conducted By
Lima Akter & Nishat Akter Munia
Jr. Instructor
Architecture Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (Architecture 3th semester)

The subject will enable the diploma Architecture students to improve architectural
design and drawing skill by enhancing his imagination and accumulation of knowledge.
Concept and mind maps that are some of these methods guide students to think and
explore. The student to establish an analysis–synthesis–evaluation relationship and
improve his intellectual and visual perception abilities. Learners can be expressed of
the relationships between a design product (in this case, an architecture), its purpose,
the designer's (architect's) conceptualization and the contextual constraints on
realizing the purpose. Skilled students can apply their knowledge and experience in
Architectural different sector.

The course on Advanced Surveying offers a comprehensive exploration of advanced techniques, methodologies, and technologies employed in the field of surveying. Building upon the fundamental principles of surveying, this course delves into the intricacies of precise measurements, data analysis, and spatial data management.

Throughout the course, students will develop an in-depth understanding of advanced surveying methods used in diverse applications, such as land development, infrastructure planning, environmental monitoring, and construction projects. By integrating theoretical concepts with practical exercises, this course equips students with the necessary skills to address complex surveying challenges effectively.

Key Topics Covered:

Geodetic and Control Surveying: Understanding geodetic datums, reference systems, coordinate transformations, and control point establishment for large-scale projects.
GNSS (Global Navigation Satellite Systems): Leveraging satellite-based positioning techniques, including GPS, GLONASS, and Galileo, to achieve precise and accurate measurements.
Remote Sensing and Photogrammetry: Utilizing aerial and satellite imagery, LiDAR, and digital photogrammetric techniques for terrain modeling, feature extraction, and mapping.
Geographic Information Systems (GIS): Applying spatial data analysis, database management, and visualization techniques to support surveying operations and decision-making processes.
Terrestrial Laser Scanning: Exploring 3D laser scanning technology for high-resolution mapping, deformation monitoring, and volumetric calculations.
Digital Terrain Modelling (DTM) and Digital Elevation Modelling (DEM): Creating accurate representations of the Earth's surface using advanced elevation data processing techniques.
Construction Surveying and Building Information Modeling (BIM): Understanding surveying procedures in construction projects and integrating survey data within the BIM framework.
Advanced Data Analysis and Error Estimation: Developing skills in statistical analysis, error propagation, and uncertainty estimation to ensure the reliability of surveying results.
Legal and Ethical Considerations: Examining legal frameworks, standards, and professional ethics relevant to surveying practices, including land boundaries and cadastral systems.
By the end of this course, students will be equipped with the necessary theoretical knowledge and practical skills to tackle complex surveying tasks, leverage cutting-edge surveying tools and technologies, and make informed decisions in various professional contexts. Whether pursuing a career in land surveying, civil engineering, or geospatial analysis, this course provides a solid foundation for success in the field of advanced surveying.

Course Conducted By
Nishat Akter Munia
Jr. Instructor
Architecture Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering(4th Arch)

After Completing the subject, students will be able to:
 State Site Plan of a multistoried Residential building.
 Explain staircase of a multistoried Residential building.
 Describe Fire Escape for multistoried residential building.
 Interpret lift for residential building.
 Discuss door and window.
 Explain Electrical fixture and fittings.
 State sanitary and plumbing layout.
 Discuss RCC sub-structure.
 Discuss RCC super-structure.
 Interpret construction site visi

Subject Aims:

• State shelter/shed/canopy.
• Describe structural consideration for shed/canopy.
• Describe the religious building.
• Describe planning of Mosque.
• Describe design feature of a mosque.
• Explain stair.
• Discuss Building by-laws and Building Approval.
• Describe basic terms of building by-laws about building construction act.

Subject Outcome:

• Students will understand the structural consideration for shed/canopy.
• Students will know the religious building.
• Students will learn planning of Mosque.
• Students will learn design feature of a mosque.
• Students will learn Building by-laws and Building Approval.
• Students will understand the basic terms of building by-laws about building construction act.