All Courses

Course Conducted By
Md. Badeuzzamal Sarker
Instructor, Electrical Technology
Daffodil Polytechnic Institute

Course Conducted By
MD SHAHRIYAR RAHMAN
Instructor
Daffodil Polytechnic Institute

Course Conducted By
RUBEL HOSSEN
Instructor
Daffodil Polytechnic Institute

OBJECTIVES:
 To provide the understanding skill on Electronic Components, Electronic measuring and testing equipment.
 To provide understanding and skill on the basic concept of semiconductor junction and to identify physically a
range of semiconductor diodes.
 To develop comprehensive knowledge and skill on special diodes and devices.
 To develop the abilities to construct different rectifier circuits.
 To provide understanding of the basic concept and principle of transistor and to identify physically a range of
transistor.
 To provide understanding and skill on the basic concept of logic gates.

SHORT DESCRIPTION:

Electronic components; measuring and test equipment; color code and soldering; semiconductor; P-N junction
diode; special diodes and devices; power supply; transistor; transistor amplifier; logic gates.

Shuva Sarker
Jr. Instructor
Telecommunication Department
Daffodil Polytechnic Institute

This created by
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute

Mobile Communication Networks
This created by
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute


Concept of mobile communication and network; Cellular concept and its initial implementations; Digital
cellular mobile systems; Cordless communications systems (CT2, DECT, PACS and PHS); Mobile data
communication systems; Third generation mobile communication system; telecommunication
management network (TMN) and signaling system; concept of TDMA cellular mobile communication;
concept of CDMA cellular mobile communication; Global mobile satellite systems; Numbers and
identities for mobile communication services; performance benchmarks for mobile; Traffic engineering
and tracking system.

CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute

To develop basic knowledge of calculation about cotton spinning such as-

a) Blow room
b) Carding
c) Draw frame
d) Simplex
e) Ring frame.

To develop basic knowledge of calculation about different yarn numbering system & moisture relative of textiles.


SHORT DESCRIPTION:

Blow room calculation; Carding calculation; Drawing calculation; Simplex calculation; Ring frame calculation & calculation of yarn numbering.

(69441)Television Transmission And Reception
Created by
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute

SHORT DESCRIPTION
Television system, Working principles of TV cameras, picture tube, transmitters and receivers,
Television signal, Television Signal Generation, Transmission and Propagation, Modern Television –
Transmission and Reception, Advanced Television systems and digital studio equipments, Cable
Television, teletext broadcast services, Satellite home receiving system and its networking, Video
recording & play back (VHS, Bmax, U-matic , video 2000, DV and HDV), Storage system, Television
studio and Automation and Features of remote control

(66841)Networks, Filters & Transmission Lines
Created by
Shuva Sarker
Junior Instructor
Telecommunication Technology
Daffodil Polytechnic Institute

SHORT DESCRIPTION
Network theorems, Four terminal networks; Half section network; Attenuators and filters; Transmission line; Line
constant & impedance matching; Antenna; Propagation of radio wave; Effect of earth curvature & ionosphere on
wave propagation.

Communication Engineering (26842)
Created by
Shuva Sarker
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute.

SHORT DESCRIPTION
Communication networks; Modulation; Demodulation Receiver and Transmitter; Telephone system;
Digital communication; Communication switching system; Optical fiber; Satellite communication; Digital
Communication, Modem and mobile communications.

Course Conducted By
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 1st Semester)
Objectives of the Course
After completion of the course students will be able to:

Basic Telephony (1G, 2G, 3G, 4G,LTE And UMTS)
o Wireless and Cellular/Mobile Radio
o Wi-MAX, Wi-Fi, VOIP, PCS
o Local and Long-Distance Communications
o Image Communications
o Transmission Media , Media Gateway Control Protocol
o Telephone switching
o Voice over Internet Protocol (VoIP) and VoIP Gateway
o Telephony and Telegraph system, (NWD, ISD and PSTN)
o Telecommunication standardization organization
o OSI Model
o Bangladesh Telecommunication Regulatory Commission , function , Acts, mission and vision of BTRC

Course Conducted By
MD. Badeuzzamal Sarker
Instructor
Electrical Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (CMT 4th Semester)
Objectives of the Course
After completion of the course students will be able to:
You will get concept of digital electronics; Logic gates, Boolean algebra and logic simplification &Combinational logic circuits.

Course Conducted By
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 6th Semester)
Objectives of the Course
After completion of the course students will be able to:
Introduction to Wireless communication, Modern wireless communication system, third generation(3G) wireless
network, fourth generation(4G) wireless network, cellular network, Amplitude Modulation(AM), Frequency
Modulation(FM), Linear Modulation technique, Constant envelope modulation technique, equalization, diversity
and channel coding, polarization diversity, frequency diversity, time diversity, different types of multiple access,
packet radio protocols, several types of wireless network, wireless system standard and 4th Industrial Revolutions.

Course Conducted By
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 6th Semester)
Objectives of the Course
After completion of the course students will be able to:

Concept of Microwave, Microwave components; Wave guide; Microwave tubes; Microwave
measurements; Semiconductor microwave devices; Propagation models: Microwave antenna.

Course Conducted By
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 4th Semester)
Objectives of the Course
After completion of the course students will be able to:
This is a sector specific course of diploma in engineering program required for enabling the
graduates to use and work with ICT. It includes Concept of digital electronics, Number system
and binary arithmetic operation, Arithmetic codes and code conversion, Concept of logic gates,
Electronic circuit of logic gates, Digital ic’s Logic families, Logic simplification & circuit design,
Combinational logic circuits, Encoder and decoder, Multiplexers and DE-Multiplexer, Sequential
logic circuits. This course designed emphasis will be more on teaching practical aspect rather
than theory.

CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.

Desktop Publishing (DTP) combines the capabilities of personal computers and advanced software to create professional-quality printed documents. It involves the use of software such as Adobe InDesign, Adobe PageMaker, and Microsoft Publisher to design and produce various materials, including brochures, newsletters, books, and marketing materials. DTP integrates text, graphics, and images, allowing for sophisticated page layouts and precise formatting.
DTP is essential in numerous industries, such as marketing, publishing, education, and corporate communications. It enables the creation of visually appealing and informative documents that effectively communicate messages to target audiences. The software required for DTP typically includes features for text formatting, image manipulation, and layout design, while the necessary hardware often consists of a high-performance computer, a high-resolution monitor, and a quality printer.
The importance of DTP extends to the job market, offering roles like graphic designers, layout artists, and publication designers. These professionals use DTP skills to enhance visual communication and produce high-quality printed materials. Overall, DTP is a vital tool in modern communication, enabling the efficient production of engaging and professional documents.