All Courses
General Textile Processing-1
SHORT DESCRIPTION
To understand the flow-chart of yarn manufacturing; Ginning; Mixing and Blending; Blow-
Room; Batch & Batching; Cotton & Jute carding; Cotton and Jute drawing & doubling; Lap forming;
Combing; Simplex; Ring frame; Jute spinning frame; Yarn numbering system. To understand the basic
concepts of Winding; Warping; Sizing; Drafting & Denting; Weaving and knitting.
To understand the flow-chart of yarn manufacturing; Ginning; Mixing and Blending; Blow-
Room; Batch & Batching; Cotton & Jute carding; Cotton and Jute drawing & doubling; Lap forming;
Combing; Simplex; Ring frame; Jute spinning frame; Yarn numbering system. To understand the basic
concepts of Winding; Warping; Sizing; Drafting & Denting; Weaving and knitting.
5 hours 59 minutes
29 steps
System Analysis & Design (66671)
Subject Teacher : Md.Rajib Ahamed (Instructor).
Subject Name : System Analysis and Design.
Subject Code : 66671
Technology : Computer.
Semester : 7th
Reference Book Name :
1). System Analysis and Design (Publisher: Hoque Publication).
2). System Analysis and Design - Elias M. Awad
3). Analysis and Design of Information Systems - V. Rajaraman
4). System Analysis and Design Methods - Whitten, Bently, Barlow
Subject Aims:
To provide the students with an opportunity to acquire knowledge, skill and attitude in the fields of system analysis, design and computer based development with special emphasis on system concept, system development life cycle, system analysis, system design & Development, implementation & Information security and object-oriented system design.
Subject Outcome:
System concept, system development life cycle, system analysis, system design & Development, implementation& Information security and object-oriented system design.
Subject Name : System Analysis and Design.
Subject Code : 66671
Technology : Computer.
Semester : 7th
Reference Book Name :
1). System Analysis and Design (Publisher: Hoque Publication).
2). System Analysis and Design - Elias M. Awad
3). Analysis and Design of Information Systems - V. Rajaraman
4). System Analysis and Design Methods - Whitten, Bently, Barlow
Subject Aims:
To provide the students with an opportunity to acquire knowledge, skill and attitude in the fields of system analysis, design and computer based development with special emphasis on system concept, system development life cycle, system analysis, system design & Development, implementation & Information security and object-oriented system design.
Subject Outcome:
System concept, system development life cycle, system analysis, system design & Development, implementation& Information security and object-oriented system design.
2 days 7 hours 16 minutes
35 steps
Construction Process-2(26441)
Course Conducted by
Md. Emon Khan.
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester Civil)
AIMS
After completion of the course the students will be able to:
Understand the construction process of arch and lintel.
Understand the construction process of different types of floor.
Understand the construction process of stairs.
Understand the construction process of different types of roof.
Understand the different finishing works in building.
Understand the construction process of doors and windows.
Understand the different operation and maintenance construction equipment.
Understand the construction of bridge, culvert, canals etc.
SHORT DESCRIPTION
Arches; Lintels; Ground floors; Upper floors; Damp proofing; Termite treatment; Stairs; Roof; Pitched
roof; Plastering and pointing; Doors; Windows; Carpentry and joinery; Scaffolding; Form works, Pointing
& Varnishing, construction equipment, Building Services, Insulation, bridge/culverts and canals etc.
Md. Emon Khan.
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester Civil)
AIMS
After completion of the course the students will be able to:
Understand the construction process of arch and lintel.
Understand the construction process of different types of floor.
Understand the construction process of stairs.
Understand the construction process of different types of roof.
Understand the different finishing works in building.
Understand the construction process of doors and windows.
Understand the different operation and maintenance construction equipment.
Understand the construction of bridge, culvert, canals etc.
SHORT DESCRIPTION
Arches; Lintels; Ground floors; Upper floors; Damp proofing; Termite treatment; Stairs; Roof; Pitched
roof; Plastering and pointing; Doors; Windows; Carpentry and joinery; Scaffolding; Form works, Pointing
& Varnishing, construction equipment, Building Services, Insulation, bridge/culverts and canals etc.
1 hour
6 steps
Surveying-3 (66452)
Course Conducted by
Md. Zahidul Islam
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)
AIMS
To be able to set out different types of curve.
To be able to conduct sounding.
To be able to learn using total station,
To be able to perform city survey.
SHORT DESCRIPTION
Curve ranging; Setting out Plan/alignment; Hydrographic survey; Total station; City survey.
Md. Zahidul Islam
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)
AIMS
To be able to set out different types of curve.
To be able to conduct sounding.
To be able to learn using total station,
To be able to perform city survey.
SHORT DESCRIPTION
Curve ranging; Setting out Plan/alignment; Hydrographic survey; Total station; City survey.
1 hour
9 steps
Water Supply Engineering (66453)
Course Conducted by
Uchingla Marma
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)
AIMS
To enable to select suitable methods for collection and distribution of water from given source to
given community.
To enable to identify impurities of water of given sources and selected suitable method/methods of
purification up to potable standard.
To assist in comparing various types of water pipes and pipe fittings.
To develop understanding of the procedure of construction, repair, replacement and maintenance
of water supply systems.
To provide understanding of the socio-economic aspect of water supply and sanitation (WSS).
SHORT DESCRIPTION
Introduction; Water requirements; Sources of water; Water pipes; Collection and transmission of water;
Quality of water; Treatment of water (clarification); Treatment of water (filtration); Treatment of water
(disinfection and softening); Miscellaneous water treatment; Water distribution; Water reservoir;
Distribution system; Rural water supply system; Plumbing system.
Uchingla Marma
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)
AIMS
To enable to select suitable methods for collection and distribution of water from given source to
given community.
To enable to identify impurities of water of given sources and selected suitable method/methods of
purification up to potable standard.
To assist in comparing various types of water pipes and pipe fittings.
To develop understanding of the procedure of construction, repair, replacement and maintenance
of water supply systems.
To provide understanding of the socio-economic aspect of water supply and sanitation (WSS).
SHORT DESCRIPTION
Introduction; Water requirements; Sources of water; Water pipes; Collection and transmission of water;
Quality of water; Treatment of water (clarification); Treatment of water (filtration); Treatment of water
(disinfection and softening); Miscellaneous water treatment; Water distribution; Water reservoir;
Distribution system; Rural water supply system; Plumbing system.
3 hours 26 minutes
16 steps
Hydraulics
AIMS
• To enable to understand the behavior of incompressible fluids.
• To enable to understand the fundamentals of buoyancy.
• To enable to understand flow of liquid in closed system and in open channel.
• To assist in identifying the common measuring instruments / apparatus used in measuring the
various parameters of flowing liquid.
• To enable to applying the common measuring instruments / apparatus in measuring the various
parameters of flowing liquid.
• To enable to understand the behavior of incompressible fluids.
• To enable to understand the fundamentals of buoyancy.
• To enable to understand flow of liquid in closed system and in open channel.
• To assist in identifying the common measuring instruments / apparatus used in measuring the
various parameters of flowing liquid.
• To enable to applying the common measuring instruments / apparatus in measuring the various
parameters of flowing liquid.
3 hours 22 minutes
22 steps
Theory of Structure [66454]
Subject Teacher : Md. Zahidul Isam, Jr. Instructor
Subject Name : Theory of Structure
Subject Code : 66454
Technology : Architecture
Semester :6th
AIMS
• To be able to consolidate and extend the fundamental understanding of the behavior of statically
determinate structures i.e. beams, frames etc.
• To be able to develop of awareness of structural behavior such as deflection and stability of
masonry dam.
• To be able to develop understanding for selection of suitable section of beam and member of the
truss.
SHORT DESCRIPTION
Shear force and bending moment of beams; Stresses in beams; Deflection of beams; Joints and
connections; Forces in frames; Steel structure; Masonry dam; Column; Moving loads; Thin Cylindrical
shells.
Subject Name : Theory of Structure
Subject Code : 66454
Technology : Architecture
Semester :6th
AIMS
• To be able to consolidate and extend the fundamental understanding of the behavior of statically
determinate structures i.e. beams, frames etc.
• To be able to develop of awareness of structural behavior such as deflection and stability of
masonry dam.
• To be able to develop understanding for selection of suitable section of beam and member of the
truss.
SHORT DESCRIPTION
Shear force and bending moment of beams; Stresses in beams; Deflection of beams; Joints and
connections; Forces in frames; Steel structure; Masonry dam; Column; Moving loads; Thin Cylindrical
shells.
7 hours 29 minutes
16 steps
Textile Design & Color - 1973
Course Created By
Jihad Hasan
Instructor, (Textile Technology)
Daffodil Polytechnic Institute
AIMS :
1. To familiarize the students with the drawing instrument and their uses.
2. To develop the skill of the student in making designs.
3. To give the students a clear concept about light and color.
4. To familiarize with color and weave effects.
5. The students able to develop knowledge, skill and attitude in the area of Textile design and color.
SHORT DESCRIPTION
Basic concept of drawing instruments and their uses; Designing; Motif and repeat of a design; Construction of design from incomplete repeats; Light and color phenomena; Theory of color; Color harmony and contrast of color; Color and weave effect; Check-stripe and shaded design.
Jihad Hasan
Instructor, (Textile Technology)
Daffodil Polytechnic Institute
AIMS :
1. To familiarize the students with the drawing instrument and their uses.
2. To develop the skill of the student in making designs.
3. To give the students a clear concept about light and color.
4. To familiarize with color and weave effects.
5. The students able to develop knowledge, skill and attitude in the area of Textile design and color.
SHORT DESCRIPTION
Basic concept of drawing instruments and their uses; Designing; Motif and repeat of a design; Construction of design from incomplete repeats; Light and color phenomena; Theory of color; Color harmony and contrast of color; Color and weave effect; Check-stripe and shaded design.
1 hour 42 minutes
18 steps
Structural mechanics (66441)
AIMS:
• To enable to apply the knowledge of scientific principles to problems of mechanical nature.
• To develop an understanding of mechanical properties of materials.
• To assist in applying mathematical and geometrical calculations to the analysis of statically
determinate beams.
SHORT DESCRIPTION
Mechanical properties of material; Laws of forces; Moment; Friction; Centroid and centre of gravity;
Moment of inertia; Torsion on circular shaft; Shear force and bending moment.
• To enable to apply the knowledge of scientific principles to problems of mechanical nature.
• To develop an understanding of mechanical properties of materials.
• To assist in applying mathematical and geometrical calculations to the analysis of statically
determinate beams.
SHORT DESCRIPTION
Mechanical properties of material; Laws of forces; Moment; Friction; Centroid and centre of gravity;
Moment of inertia; Torsion on circular shaft; Shear force and bending moment.
1 hour 43 minutes
15 steps
Foundation Engineering (26451)
AIMS
To be able to understand the foundation and foundation engineering.
To be able to understand the soil stabilization.
To be able to understand and the bearing capacity of soil.
To be able to understand the factors determining types of foundation.
To be able to understand the foundation on sand and non-plastic soil, plastic soil, non-uniform soil,
rock.
To be able to understand the excavating and bracing.
To be able to understand the sheet pile wall, cofferdam and bulk head.
To be able to understand the damages due to construction operations.
SHORT DESCRIPTION
Foundation and foundation engineering; Factors determining the types of foundation; Soil stabilization;
Bearing capacity of soil; Foundation on sand and non-plastic silt; Foundation on clay and plastic silt;
Foundation on non-uniform soil; Foundation on rock; Excavation and bracing; Sheet pile, cofferdam &
bulkhead; Damages due to construction operations.
To be able to understand the foundation and foundation engineering.
To be able to understand the soil stabilization.
To be able to understand and the bearing capacity of soil.
To be able to understand the factors determining types of foundation.
To be able to understand the foundation on sand and non-plastic soil, plastic soil, non-uniform soil,
rock.
To be able to understand the excavating and bracing.
To be able to understand the sheet pile wall, cofferdam and bulk head.
To be able to understand the damages due to construction operations.
SHORT DESCRIPTION
Foundation and foundation engineering; Factors determining the types of foundation; Soil stabilization;
Bearing capacity of soil; Foundation on sand and non-plastic silt; Foundation on clay and plastic silt;
Foundation on non-uniform soil; Foundation on rock; Excavation and bracing; Sheet pile, cofferdam &
bulkhead; Damages due to construction operations.
27 minutes
15 steps
Civil Engineering Drawing (CED-2): 66443
Course Conducted By
zayanta chandra
Daffodil Polytechnic Institute
This course is for: Diploma in Engineering (Civil 4th Semester)
Objectives of the Course:
• To enable in learning detail drawing of building components.
• To enable to undrstand and perform computer-aided design (AutoCAD).
• To be able to prepare a production drawing of a multi‐storied building.
• To be able to prepare detail drawing of building components.
• To be able to acquire knowledge and skill to prepare detail working drawing of a scheme.
• To be able to interpret the structural drawings of a multi‐storied building.
• To be able to prepare production drawings of multi‐storied buildings adopting CAD.
Short Description:
Computer-Aided Design (CAD) and plotting; 2D & 3D CAD commands; Multi‐storied building (CAD); Detail working drawing (CAD) of RCC column with footing; Lintel with sunshade; Retaining wall; Foundation, Beam, Slab, Staircase, ramp and lift core; Underground water reservoir; Septic tank.
zayanta chandra
Daffodil Polytechnic Institute
This course is for: Diploma in Engineering (Civil 4th Semester)
Objectives of the Course:
• To enable in learning detail drawing of building components.
• To enable to undrstand and perform computer-aided design (AutoCAD).
• To be able to prepare a production drawing of a multi‐storied building.
• To be able to prepare detail drawing of building components.
• To be able to acquire knowledge and skill to prepare detail working drawing of a scheme.
• To be able to interpret the structural drawings of a multi‐storied building.
• To be able to prepare production drawings of multi‐storied buildings adopting CAD.
Short Description:
Computer-Aided Design (CAD) and plotting; 2D & 3D CAD commands; Multi‐storied building (CAD); Detail working drawing (CAD) of RCC column with footing; Lintel with sunshade; Retaining wall; Foundation, Beam, Slab, Staircase, ramp and lift core; Underground water reservoir; Septic tank.
1 day 6 hours 51 minutes
34 steps
Data Communication System for 4th CMT-A / 6th TCT (66644)
Subject Teacher: Md. Rajib Ahamed(Instructor)
Subject Name: Data CommunicationSystem
Subject Code: 66644
Technology: Computer
Semester: 4th-A
Reference Book: Computer Networks. By ANDREW S.TANENBAUM
Text Book: Data Communication System
(Publisher: HaqueProkashani / Technical Prokashoni)
INTENTION
AIMS
• To be able to acquire the knowledge on data communication Basics.
• To be able to provide the knowledge and to develop skill on signal and data transmission systems and transmission media.
• To be able to acquire the knowledge on Digital communication and computer networks.
• To be able to provide the knowledge and to develop skill on network topologies and protocols.
• To be able to provide the knowledge and to develop skill on MODEM, Hub, Switch, NICand Repeater.
• To be able to establish and implement a LAN to provide Network services.
SHORT DESCRIPTION
Communication Basics; Analog and Digital Modulation and Demodulation; Analog and Digital communication; Transmission media and connectors; LAN, Network fundamentals; Peer‐peer & Client‐Server techniques; Topologies and protocols; NIC; Network Addressing; IP address and Subnet Mask.
Subject Name: Data CommunicationSystem
Subject Code: 66644
Technology: Computer
Semester: 4th-A
Reference Book: Computer Networks. By ANDREW S.TANENBAUM
Text Book: Data Communication System
(Publisher: HaqueProkashani / Technical Prokashoni)
INTENTION
AIMS
• To be able to acquire the knowledge on data communication Basics.
• To be able to provide the knowledge and to develop skill on signal and data transmission systems and transmission media.
• To be able to acquire the knowledge on Digital communication and computer networks.
• To be able to provide the knowledge and to develop skill on network topologies and protocols.
• To be able to provide the knowledge and to develop skill on MODEM, Hub, Switch, NICand Repeater.
• To be able to establish and implement a LAN to provide Network services.
SHORT DESCRIPTION
Communication Basics; Analog and Digital Modulation and Demodulation; Analog and Digital communication; Transmission media and connectors; LAN, Network fundamentals; Peer‐peer & Client‐Server techniques; Topologies and protocols; NIC; Network Addressing; IP address and Subnet Mask.
14 hours 45 minutes
12 steps
Computer Architecture & Microprocessor for 5th CMT (28553)
Subject Teacher : Md. Rajib Ahamed (Instructor).
S Subject Name : Microprocessor & Interfacing.
S Subject Code : 66662
T Technology : Computer.
Semester : 6th
Reference Book Name : Microprocessor & Interfacing (Publisher: Hoque Publication). The 8086 and 80286 Microprocessor - Avatar Singh. Microprocessors and Interfacing: Programming and Hardware - Douglas V. Hall.
Subject Aims:
To be able to acquire the knowledge on microprocessor, microcomputer.
To be able to develop the knowledge and skill on the architecture and assembly
Language programming of 16- bit microprocessor.
To be able to acquire the knowledge and skill on memory, interrupt and I/O
Interfacing.
Subject Outcome:
⮚ Concept of microprocessor, Basic conception of microprocessor and microcomputer, Architecture
and addressing mode of Intel 8086p.
⮚ Instruction timing of Intel 8086 p; Memory, input /output and interrupt interfacing of Intel 8086
p.
Interfacing principle and peripheral devices; programming of Intel 8086/8088; Intel x86 family,
multi-core processor idea.
S Subject Name : Microprocessor & Interfacing.
S Subject Code : 66662
T Technology : Computer.
Semester : 6th
Reference Book Name : Microprocessor & Interfacing (Publisher: Hoque Publication). The 8086 and 80286 Microprocessor - Avatar Singh. Microprocessors and Interfacing: Programming and Hardware - Douglas V. Hall.
Subject Aims:
To be able to acquire the knowledge on microprocessor, microcomputer.
To be able to develop the knowledge and skill on the architecture and assembly
Language programming of 16- bit microprocessor.
To be able to acquire the knowledge and skill on memory, interrupt and I/O
Interfacing.
Subject Outcome:
⮚ Concept of microprocessor, Basic conception of microprocessor and microcomputer, Architecture
and addressing mode of Intel 8086p.
⮚ Instruction timing of Intel 8086 p; Memory, input /output and interrupt interfacing of Intel 8086
p.
Interfacing principle and peripheral devices; programming of Intel 8086/8088; Intel x86 family,
multi-core processor idea.
22 hours 49 minutes
49 steps
Basic Estimating & Costing (66447)
Introduction to estimating, Quantity estimation of excavating tank, road embankment, canal digging,
Steps, boundary wall, bituminous & RCC road, estimate of a single storied two-roomed building with
Verandah and double storied building, rate analysis.
Steps, boundary wall, bituminous & RCC road, estimate of a single storied two-roomed building with
Verandah and double storied building, rate analysis.
1 hour
2 steps
Sequential Logic System (66653)
Subject Teacher : Md. Rajib Ahamed (Instructor)
Subject Name : Sequential Logic System.
Subject Code : 66653
Technology : Computer Technology.
Semester : 5th
BTEB Text Book Name : Sequential Logic System (Publisher: Technical Prokashani)
Reference Book/Note Name:
1. Digital principles and application − Albert PaulMalvino.
2. Digital Computer Electronics− Albert PaulMalvino.
3. Digital Systems–Ronald J.Tocci.
4. Modern Digital Electronics - R. P. Jain.
5. Class note paper.
Subject Aims:
• To be able to acquire the knowledge & skill on Flip Flop, counters, shift registers and their applications.
• To be able to acquire the knowledge & skill on semiconductor memories & ALU.
• To be able to acquire the knowledge & skill on A/D and D/A converters.
• To familiarize with PLD & simple computer (SAP-1& SAP-2).
Subject Outcome:
Synchronous optical network;
Integrated services digital network;
Asynchronous transfer mode; Wireless internet;
Multimedia communication over IP network;
Computer telephony integration and unified messaging;
Telecommunication management network and Information security.
Subject Name : Sequential Logic System.
Subject Code : 66653
Technology : Computer Technology.
Semester : 5th
BTEB Text Book Name : Sequential Logic System (Publisher: Technical Prokashani)
Reference Book/Note Name:
1. Digital principles and application − Albert PaulMalvino.
2. Digital Computer Electronics− Albert PaulMalvino.
3. Digital Systems–Ronald J.Tocci.
4. Modern Digital Electronics - R. P. Jain.
5. Class note paper.
Subject Aims:
• To be able to acquire the knowledge & skill on Flip Flop, counters, shift registers and their applications.
• To be able to acquire the knowledge & skill on semiconductor memories & ALU.
• To be able to acquire the knowledge & skill on A/D and D/A converters.
• To familiarize with PLD & simple computer (SAP-1& SAP-2).
Subject Outcome:
Synchronous optical network;
Integrated services digital network;
Asynchronous transfer mode; Wireless internet;
Multimedia communication over IP network;
Computer telephony integration and unified messaging;
Telecommunication management network and Information security.
15 hours 46 minutes
52 steps
General Textile Process - II (21121)
Students need to gather basic knowledge and skill on overall processes for wet processing, garments manufacturing, fashion design and merchandising before in depth study on specific subject matter as well as specialization. Fundamental knowledge and skills are the prerequisite to study specialized subjects. This course outlines the overview of wet processing and apparel manufacturing as well as introduces the basic knowledge of fashion design and merchandising.
This course is conducted by:
Md. Jihad Hasan
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
This course is conducted by:
Md. Jihad Hasan
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
3 hours 53 minutes
17 steps
Python Programming for 2nd CST (28521)
Subject Teacher : Md. Rajib Ahamed (Instructor).
Subject Name : Python Programming
Subject Code : 28521
Technology : Computer Science & Technology
Semester : 2nd
Reference Book : (1). Python Programming (Publisher: Hoque Publication)
(2). Learning Python-Mark Lutz (5th Edition)
(3). Python Programming: An Introduction to Computer Science-John Zelle (3rd Edition)
(4). Python for Data Analysis: Data Wrangling with Pandas, NumPy and IPython-Wes Mckinney (2nd Edition)
(5). Learn Python the Hard Way-ZED SHAW (3rdEdition).
Subject Aims:
To provide the students with an opportunity to acquire knowledge, skills and attitude in the area. To develop knowledge and skill on programming and problem-solving. To develop knowledge and skill to create, compile, debug & execute a program.
Subject Outcome:
After undergoing the subject, students will be able to develop knowledge of the Basics of programming language, Basics of python, Variables and data types, String processing, Python operators, Branch, Loop, List, Tuple, Set, Dictionary structures, Function, and I/O operation of Python Programming Language.
Subject Name : Python Programming
Subject Code : 28521
Technology : Computer Science & Technology
Semester : 2nd
Reference Book : (1). Python Programming (Publisher: Hoque Publication)
(2). Learning Python-Mark Lutz (5th Edition)
(3). Python Programming: An Introduction to Computer Science-John Zelle (3rd Edition)
(4). Python for Data Analysis: Data Wrangling with Pandas, NumPy and IPython-Wes Mckinney (2nd Edition)
(5). Learn Python the Hard Way-ZED SHAW (3rdEdition).
Subject Aims:
To provide the students with an opportunity to acquire knowledge, skills and attitude in the area. To develop knowledge and skill on programming and problem-solving. To develop knowledge and skill to create, compile, debug & execute a program.
Subject Outcome:
After undergoing the subject, students will be able to develop knowledge of the Basics of programming language, Basics of python, Variables and data types, String processing, Python operators, Branch, Loop, List, Tuple, Set, Dictionary structures, Function, and I/O operation of Python Programming Language.
23 hours 54 minutes
44 steps
(21141)Man Made Fiber & Filament
Conducted By:
Md. Jihad Hasan
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
After undergoing the subject, students will be able to:
Explain Man-Made Fibre manufacturing process.
Explain Regenerated Cellulosic Fiber manufacturing process.
Identify problem during production.
Provide effective solution during production.
Explain High-performance Man-Made Fibre.
Illustrate recycling process and sustainability of Man-Made Fibre
Md. Jihad Hasan
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
After undergoing the subject, students will be able to:
Explain Man-Made Fibre manufacturing process.
Explain Regenerated Cellulosic Fiber manufacturing process.
Identify problem during production.
Provide effective solution during production.
Explain High-performance Man-Made Fibre.
Illustrate recycling process and sustainability of Man-Made Fibre
2 hours 35 minutes
8 steps