All Courses

Subject Teacher : Md.Rajib Ahamed (Instructor).
Subject Name : System Analysis and Design.
Subject Code : 66671
Technology : Computer.
Semester : 7th

Reference Book Name :
1). System Analysis and Design (Publisher: Hoque Publication).
2). System Analysis and Design - Elias M. Awad
3). Analysis and Design of Information Systems - V. Rajaraman
4). System Analysis and Design Methods - Whitten, Bently, Barlow

Subject Aims:
To provide the students with an opportunity to acquire knowledge, skill and attitude in the fields of system analysis, design and computer based development with special emphasis on system concept, system development life cycle, system analysis, system design & Development, implementation & Information security and object-oriented system design.

Subject Outcome:
System concept, system development life cycle, system analysis, system design & Development, implementation& Information security and object-oriented system design.

Course Conducted by
Md. Emon Khan.
Jr. Instructor,
Daffodil Polytechnic Institute.

This Course for: Diploma in Engineering (5th Semester Civil)

AIMS
After completion of the course the students will be able to:
 Understand the construction process of arch and lintel.
 Understand the construction process of different types of floor.
 Understand the construction process of stairs.
 Understand the construction process of different types of roof.
 Understand the different finishing works in building.
 Understand the construction process of doors and windows.
 Understand the different operation and maintenance construction equipment.
 Understand the construction of bridge, culvert, canals etc.

SHORT DESCRIPTION
Arches; Lintels; Ground floors; Upper floors; Damp proofing; Termite treatment; Stairs; Roof; Pitched
roof; Plastering and pointing; Doors; Windows; Carpentry and joinery; Scaffolding; Form works, Pointing
& Varnishing, construction equipment, Building Services, Insulation, bridge/culverts and canals etc.

Course Conducted by
Md. Emon Khan
Jr.Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (6th Semester,Civil)

AIMS
• To provide understanding on the influence of the climatic condition of Bangladesh on its ground
water and surface water flow
• To provide understanding of recharging of underground water and ascertain its necessity in
Bangladesh.
• To enable to select a suitable source of water and method of irrigation for particular situation.
• To enable to select a suitable method of drainage for particular situation.
• To enable to select a suitable method for control of rivers and flood in Bangladesh.
• To understand rain water harvesting.

SHORT DESCRIPTION
Sources of water; Rainfall and run-off; Lifting of underground water; Storing and Recharging of
ground/rain water; Irrigation and its effect; Well irrigation; Water requirements for crops; and quality
of irrigation water; Storage reservoir; Dam and dyke; Irrigation canals; Silt deposit; Scouring; Canal
works; Drainage; River training works; Flood and flood management and flood control; Irrigation
projects in Bangladesh.

AIMS
 To be able to understand the properties of reinforced cement concrete (RCC).
 To be able to select the suitable size of reinforced concrete beams & lintels with reinforcement.
 To be able to supervise the placing of reinforcement for beams & lintel.

AIMS
• To enable to understand the behavior of incompressible fluids.
• To enable to understand the fundamentals of buoyancy.
• To enable to understand flow of liquid in closed system and in open channel.
• To assist in identifying the common measuring instruments / apparatus used in measuring the
various parameters of flowing liquid.
• To enable to applying the common measuring instruments / apparatus in measuring the various
parameters of flowing liquid.

AIMS:
• To enable to apply the knowledge of scientific principles to problems of mechanical nature.
• To develop an understanding of mechanical properties of materials.
• To assist in applying mathematical and geometrical calculations to the analysis of statically
determinate beams.

SHORT DESCRIPTION
Mechanical properties of material; Laws of forces; Moment; Friction; Centroid and centre of gravity;
Moment of inertia; Torsion on circular shaft; Shear force and bending moment.

Course Conducted By
zayanta chandra
Daffodil Polytechnic Institute
This course is for: Diploma in Engineering (Civil 4th Semester)

Objectives of the Course:
• To enable in learning detail drawing of building components.
• To enable to undrstand and perform computer-aided design (AutoCAD).
• To be able to prepare a production drawing of a multi‐storied building.
• To be able to prepare detail drawing of building components.
• To be able to acquire knowledge and skill to prepare detail working drawing of a scheme.
• To be able to interpret the structural drawings of a multi‐storied building.
• To be able to prepare production drawings of multi‐storied buildings adopting CAD.

Short Description:
Computer-Aided Design (CAD) and plotting; 2D & 3D CAD commands; Multi‐storied building (CAD); Detail working drawing (CAD) of RCC column with footing; Lintel with sunshade; Retaining wall; Foundation, Beam, Slab, Staircase, ramp and lift core; Underground water reservoir; Septic tank.

Subject Teacher: Md. Rajib Ahamed(Instructor)
Subject Name: Data CommunicationSystem
Subject Code: 66644
Technology: Computer
Semester: 4th-A
Reference Book: Computer Networks. By ANDREW S.TANENBAUM
Text Book: Data Communication System
(Publisher: HaqueProkashani / Technical Prokashoni)

INTENTION
AIMS
• To be able to acquire the knowledge on data communication Basics.
• To be able to provide the knowledge and to develop skill on signal and data transmission systems and transmission media.
• To be able to acquire the knowledge on Digital communication and computer networks.
• To be able to provide the knowledge and to develop skill on network topologies and protocols.
• To be able to provide the knowledge and to develop skill on MODEM, Hub, Switch, NICand Repeater.
• To be able to establish and implement a LAN to provide Network services.

SHORT DESCRIPTION
Communication Basics; Analog and Digital Modulation and Demodulation; Analog and Digital communication; Transmission media and connectors; LAN, Network fundamentals; Peer‐peer & Client‐Server techniques; Topologies and protocols; NIC; Network Addressing; IP address and Subnet Mask.

Subject Teacher : Md. Rajib Ahamed (Instructor).
S Subject Name : Microprocessor & Interfacing.
S Subject Code : 66662
T Technology : Computer.
Semester : 6th
Reference Book Name : Microprocessor & Interfacing (Publisher: Hoque Publication). The 8086 and 80286 Microprocessor - Avatar Singh. Microprocessors and Interfacing: Programming and Hardware - Douglas V. Hall.

Subject Aims:
 To be able to acquire the knowledge on microprocessor, microcomputer.
 To be able to develop the knowledge and skill on the architecture and assembly
Language programming of 16- bit microprocessor.
 To be able to acquire the knowledge and skill on memory, interrupt and I/O
Interfacing.

Subject Outcome:
⮚ Concept of microprocessor, Basic conception of microprocessor and microcomputer, Architecture
and addressing mode of Intel 8086p.
⮚ Instruction timing of Intel 8086 p; Memory, input /output and interrupt interfacing of Intel 8086
p.
 Interfacing principle and peripheral devices; programming of Intel 8086/8088; Intel x86 family,
multi-core processor idea.

Introduction to estimating, Quantity estimation of excavating tank, road embankment, canal digging,
Steps, boundary wall, bituminous & RCC road, estimate of a single storied two-roomed building with
Verandah and double storied building, rate analysis.

Subject Teacher : Md. Rajib Ahamed (Instructor)
Subject Name : Sequential Logic System.
Subject Code : 66653
Technology : Computer Technology.
Semester : 5th

BTEB Text Book Name : Sequential Logic System (Publisher: Technical Prokashani)
Reference Book/Note Name:
1. Digital principles and application − Albert PaulMalvino.
2. Digital Computer Electronics− Albert PaulMalvino.
3. Digital Systems–Ronald J.Tocci.
4. Modern Digital Electronics - R. P. Jain.
5. Class note paper.

Subject Aims:
• To be able to acquire the knowledge & skill on Flip Flop, counters, shift registers and their applications.
• To be able to acquire the knowledge & skill on semiconductor memories & ALU.
• To be able to acquire the knowledge & skill on A/D and D/A converters.
• To familiarize with PLD & simple computer (SAP-1& SAP-2).

Subject Outcome:
 Synchronous optical network;
 Integrated services digital network;
 Asynchronous transfer mode; Wireless internet;
 Multimedia communication over IP network;
 Computer telephony integration and unified messaging;
 Telecommunication management network and Information security.

Subject Teacher : Md. Rajib Ahamed (Instructor).
Subject Name : Python Programming
Subject Code : 28521
Technology : Computer Science & Technology
Semester : 2nd
Reference Book : (1). Python Programming (Publisher: Hoque Publication)
(2). Learning Python-Mark Lutz (5th Edition)
(3). Python Programming: An Introduction to Computer Science-John Zelle (3rd Edition)
(4). Python for Data Analysis: Data Wrangling with Pandas, NumPy and IPython-Wes Mckinney (2nd Edition)
(5). Learn Python the Hard Way-ZED SHAW (3rdEdition).

Subject Aims:
To provide the students with an opportunity to acquire knowledge, skills and attitude in the area. To develop knowledge and skill on programming and problem-solving. To develop knowledge and skill to create, compile, debug & execute a program.

Subject Outcome:
After undergoing the subject, students will be able to develop knowledge of the Basics of programming language, Basics of python, Variables and data types, String processing, Python operators, Branch, Loop, List, Tuple, Set, Dictionary structures, Function, and I/O operation of Python Programming Language.

Principle Concept:
Sensor & IoT System is the most significant area of diploma in Computer Science & Technology. To work with Sensor & IoT System should have the knowledge, skills and attitude of Sensor and IoT, IoT Architecture, Raspberry pi and Arduino, IoT Architecture, IoT devices, Connectivity in IoT, Security in IoT, Data analytics in IoT, IIoT in agriculture, IoT standards and interoperability, Regulatory and ethical considerations, Future trends in IoT and IIoT.

Learning Outcome (Theoretical):
After completing the subject, students will be able to:
1. Interpret Sensor and IoT
2. Illustrate IoT Architecture
3. Interpret Raspberry pi and Arduino.
4. Explain IoT Architecture
5. Explain IoT devices and sensors
6. Describe connectivity in IoT
7. Illustrate security in IoT
8. Describe data analytics in IoT
9. Explain IIoT in agriculture
10. Explain IoT standards and interoperability
11. Explain regulatory and ethical considerations
12. Describe future trends in IoT and IIoT

Principle Concept:
As electronic devices continue to play a vital role in our daily lives, the need for understanding Microcontroller and Embedded Systems becomes imperative. This course aims to equip Diploma in Engineering Level students with knowledge and skills related to Microcontroller Architecture, Programming, Interfacing within Embedded Systems, and practical applications in real-world projects.

Learning Outcome (Theoretical):
After completing the subject, students will be able to:
1. Interpret Microcontroller Architecture.
2. Write Program Microcontrollers using suitable IDEs.
3. State procedure to Interface the Microcontrollers with various sensors and actuators.
4. Comprehend communication protocols in Embedded Systems.
5. Explain Analog-to-Digital Conversion and PWM.
6. Develop and troubleshoot projects involving Microcontrollers and Embedded Systems.
7. Explain procedure of Interface with real world devices.
8. Illustrate mini development kit.

Offset machine operation is a critical process in the printing industry, involving several meticulous steps to ensure high-quality results. Initially, the machine is prepared by collecting job information and setting up the machine according to this data. The inking unit is controlled by measuring pH levels, roller hardness, and adjusting the roller gap to regulate ink supply. The feeding unit is then prepared by setting the sucker and blower, adjusting guides, and maintaining the feed board height. Sheet control involves setting various lays, measuring paper thickness, and adjusting the double sheet detector. Plates and blankets are cleaned, prepared, and preserved to ensure quality. During the printing process, the press is made ready, run for production, and cleaned as needed, with strict control over print registration for multi-color jobs. Safety measures are followed meticulously, raw materials are handled carefully, and management plays a crucial role in accident prevention. Finally, the delivery unit is set up by adjusting guides and maintaining the delivery chain gripper. Detailed record-keeping throughout these steps is essential for consistent and high-quality printing outcomes.

Image Carrier preparation refers to the processes and techniques involved in creating the medium on which images will be printed using various printing technologies. The preparation process varies depending on the type of printing method being used, such as relief printing, planographic printing, intaglio printing, and screen printing. Each method requires specific materials, tools, and steps to ensure the quality and accuracy of the printed image.

### Types of Image Carriers and Their Preparation

1. Conventional Relief Printing:
involves preparing block and type forms.
uses materials like rubber and photopolymer plates.
Processes include making line blocks and half-tone blocks and handling photopolymer and rubber plates.

2. Modern Relief Printing:
utilizes digital flexo plates and various digital imaging technologies.
involves the use of digital imagers (DI) and different types of lasers for plate making.

3. Conventional Planographic Printing:
uses lithographic plates and involves the photomechanical process.
requires materials like Ps plates and involves graining processes to prepare the plate surface.

4. Modern Planographic Printing:
employs Employs Computer-to-Plate (CtP) technology and various digital imaging techniques.
includes auto plate exposure, processing of digitally imaged plates, and maintenance of image and non-image areas.

5. Intaglio Printing:
involves materials and equipment for gravure image preparation.
Processes include electroplating gravure cylinders, etching, and engraving.

6. Screen Printing:
utilizes raw materials, tools, and equipment for stencil making.
Methods include direct and indirect stencil making and Computer-to-Screen (CtS) processes.

### Learning Outcomes

**Theoretical:**
Understand image preparation processes for different printing technologies.
Differentiate between various types of image carriers.
Know the raw materials and chemicals used in image preparation.
Solve problems related to image preparation using different printing methods.

**Practical:**
Apply the tools and equipment used in screen printing.
Prepare various types of stencils and print on different substrates.
Operate screen-printing machines and presses.

These processes are essential for ensuring high-quality prints in various printing applications, from commercial printing to specialized artistic productions】.