All Courses

SHORT DESCRIPTION

To understand the flow-chart of yarn manufacturing; Ginning; Mixing and Blending; Blow-
Room; Batch & Batching; Cotton & Jute carding; Cotton and Jute drawing & doubling; Lap forming;

Combing; Simplex; Ring frame; Jute spinning frame; Yarn numbering system. To understand the basic
concepts of Winding; Warping; Sizing; Drafting & Denting; Weaving and knitting.

Course Conducted by
Md. Zahidul Islam
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)

AIMS
 To be able to set out different types of curve.
 To be able to conduct sounding.
 To be able to learn using total station,
 To be able to perform city survey.

SHORT DESCRIPTION
Curve ranging; Setting out Plan/alignment; Hydrographic survey; Total station; City survey.

Course Conducted by
Uchingla Marma
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)

AIMS
 To enable to select suitable methods for collection and distribution of water from given source to
given community.
 To enable to identify impurities of water of given sources and selected suitable method/methods of
purification up to potable standard.
 To assist in comparing various types of water pipes and pipe fittings.
 To develop understanding of the procedure of construction, repair, replacement and maintenance
of water supply systems.
 To provide understanding of the socio-economic aspect of water supply and sanitation (WSS).

SHORT DESCRIPTION
Introduction; Water requirements; Sources of water; Water pipes; Collection and transmission of water;
Quality of water; Treatment of water (clarification); Treatment of water (filtration); Treatment of water
(disinfection and softening); Miscellaneous water treatment; Water distribution; Water reservoir;
Distribution system; Rural water supply system; Plumbing system.

Subject Teacher : Md. Zahidul Isam, Jr. Instructor
Subject Name : Theory of Structure
Subject Code : 66454
Technology : Architecture
Semester :6th

AIMS
• To be able to consolidate and extend the fundamental understanding of the behavior of statically
determinate structures i.e. beams, frames etc.
• To be able to develop of awareness of structural behavior such as deflection and stability of
masonry dam.
• To be able to develop understanding for selection of suitable section of beam and member of the
truss.
SHORT DESCRIPTION
Shear force and bending moment of beams; Stresses in beams; Deflection of beams; Joints and
connections; Forces in frames; Steel structure; Masonry dam; Column; Moving loads; Thin Cylindrical
shells.

Course Created By
Jihad Hasan
Instructor, (Textile Technology)
Daffodil Polytechnic Institute

AIMS :
1. To familiarize the students with the drawing instrument and their uses.
2. To develop the skill of the student in making designs.
3. To give the students a clear concept about light and color.
4. To familiarize with color and weave effects.
5. The students able to develop knowledge, skill and attitude in the area of Textile design and color.

SHORT DESCRIPTION

Basic concept of drawing instruments and their uses; Designing; Motif and repeat of a design; Construction of design from incomplete repeats; Light and color phenomena; Theory of color; Color harmony and contrast of color; Color and weave effect; Check-stripe and shaded design.

AIMS
 To be able to understand the foundation and foundation engineering.
 To be able to understand the soil stabilization.
 To be able to understand and the bearing capacity of soil.
 To be able to understand the factors determining types of foundation.
 To be able to understand the foundation on sand and non-plastic soil, plastic soil, non-uniform soil,
rock.
 To be able to understand the excavating and bracing.
 To be able to understand the sheet pile wall, cofferdam and bulk head.
 To be able to understand the damages due to construction operations.

SHORT DESCRIPTION
Foundation and foundation engineering; Factors determining the types of foundation; Soil stabilization;
Bearing capacity of soil; Foundation on sand and non-plastic silt; Foundation on clay and plastic silt;
Foundation on non-uniform soil; Foundation on rock; Excavation and bracing; Sheet pile, cofferdam &
bulkhead; Damages due to construction operations.

Students need to gather basic knowledge and skill on overall processes for wet processing, garments manufacturing, fashion design and merchandising before in depth study on specific subject matter as well as specialization. Fundamental knowledge and skills are the prerequisite to study specialized subjects. This course outlines the overview of wet processing and apparel manufacturing as well as introduces the basic knowledge of fashion design and merchandising.

This course is conducted by:
Md. Jihad Hasan
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.

Conducted By:
Md. Jihad Hasan
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute


After undergoing the subject, students will be able to:
Explain Man-Made Fibre manufacturing process.
Explain Regenerated Cellulosic Fiber manufacturing process.
Identify problem during production.
Provide effective solution during production.
Explain High-performance Man-Made Fibre.
Illustrate recycling process and sustainability of Man-Made Fibre

Fabric is the primary completed product of textile industry. Different apparel/garments are produced from different types of fabric. So, it is very essential for textile diploma students to identify the basic woven and knit fabrics. Textile diploma engineer’s responsibilities are identifying, analyzing and developing the supplied fabric for re-production. Fabric structure and design analysis is very important for merchant as well as factory management. This course has been designed in such a way that the upcoming textile diploma engineer’s be specialized in fabric manufacturing to analyze, identify and reproduce the advance structure of woven and knit fabric.

This course is conducted by:
Md. Jihad Hasan
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.

This course will help students to explore the merchandising concepts, core activities and get to know about successful merchandising professionals. This course deals with the activities of apparel merchandising which starts from the sourcing of the materials to the shipment of the end products to the desired destination of the buyers. Learners will learn about how to communicate with different stakeholders including suppliers, production departments, liaison offices, commercial offices, banks and buyers. Learners will learn about merchandising planning, critical analysis of lead time, and upholding negotiations with the internal and external associates. They will also learn about various importing and exporting practices like shipping, customs and port operating procedures.


This course is conducted by:
Md. Jihad Hasan
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.