All Courses

Course Conducted by
Md.Josim Uddin.
Jr. Instructor,
Daffodil Polytechnic Institute.

This Course for: Diploma in Engineering (5th Semester Civil)

AIMS
After completion of the course the students will be able to:
 Understand the construction process of arch and lintel.
 Understand the construction process of different types of floor.
 Understand the construction process of stairs.
 Understand the construction process of different types of roof.
 Understand the different finishing works in building.
 Understand the construction process of doors and windows.
 Understand the different operation and maintenance construction equipment.
 Understand the construction of bridge, culvert, canals etc.

SHORT DESCRIPTION
Arches; Lintels; Ground floors; Upper floors; Damp proofing; Termite treatment; Stairs; Roof; Pitched
roof; Plastering and pointing; Doors; Windows; Carpentry and joinery; Scaffolding; Form works, Pointing
& Varnishing, construction equipment, Building Services, Insulation, bridge/culverts and canals etc.

Course Conducted by
Md. Zahidul Islam
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)

AIMS
 To be able to set out different types of curve.
 To be able to conduct sounding.
 To be able to learn using total station,
 To be able to perform city survey.

SHORT DESCRIPTION
Curve ranging; Setting out Plan/alignment; Hydrographic survey; Total station; City survey.

Course Conducted by
Uchingla Marma
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)

AIMS
 To enable to select suitable methods for collection and distribution of water from given source to
given community.
 To enable to identify impurities of water of given sources and selected suitable method/methods of
purification up to potable standard.
 To assist in comparing various types of water pipes and pipe fittings.
 To develop understanding of the procedure of construction, repair, replacement and maintenance
of water supply systems.
 To provide understanding of the socio-economic aspect of water supply and sanitation (WSS).

SHORT DESCRIPTION
Introduction; Water requirements; Sources of water; Water pipes; Collection and transmission of water;
Quality of water; Treatment of water (clarification); Treatment of water (filtration); Treatment of water
(disinfection and softening); Miscellaneous water treatment; Water distribution; Water reservoir;
Distribution system; Rural water supply system; Plumbing system.

AIMS
• To enable to understand the behavior of incompressible fluids.
• To enable to understand the fundamentals of buoyancy.
• To enable to understand flow of liquid in closed system and in open channel.
• To assist in identifying the common measuring instruments / apparatus used in measuring the
various parameters of flowing liquid.
• To enable to applying the common measuring instruments / apparatus in measuring the various
parameters of flowing liquid.

Subject Teacher : Md. Zahidul Isam, Jr. Instructor
Subject Name : Theory of Structure
Subject Code : 66454
Technology : Architecture
Semester :6th

AIMS
• To be able to consolidate and extend the fundamental understanding of the behavior of statically
determinate structures i.e. beams, frames etc.
• To be able to develop of awareness of structural behavior such as deflection and stability of
masonry dam.
• To be able to develop understanding for selection of suitable section of beam and member of the
truss.
SHORT DESCRIPTION
Shear force and bending moment of beams; Stresses in beams; Deflection of beams; Joints and
connections; Forces in frames; Steel structure; Masonry dam; Column; Moving loads; Thin Cylindrical
shells.

Prepared by: Benojir Tabassum
Instructor
Deffodil polytechnic institute

Prepared by: Benojir Tabassum
Instructor, Deffodil Polytechnic Institute

AIMS:
• To enable to apply the knowledge of scientific principles to problems of mechanical nature.
• To develop an understanding of mechanical properties of materials.
• To assist in applying mathematical and geometrical calculations to the analysis of statically
determinate beams.

SHORT DESCRIPTION
Mechanical properties of material; Laws of forces; Moment; Friction; Centroid and centre of gravity;
Moment of inertia; Torsion on circular shaft; Shear force and bending moment.

AIMS
 To be able to understand the foundation and foundation engineering.
 To be able to understand the soil stabilization.
 To be able to understand and the bearing capacity of soil.
 To be able to understand the factors determining types of foundation.
 To be able to understand the foundation on sand and non-plastic soil, plastic soil, non-uniform soil,
rock.
 To be able to understand the excavating and bracing.
 To be able to understand the sheet pile wall, cofferdam and bulk head.
 To be able to understand the damages due to construction operations.

SHORT DESCRIPTION
Foundation and foundation engineering; Factors determining the types of foundation; Soil stabilization;
Bearing capacity of soil; Foundation on sand and non-plastic silt; Foundation on clay and plastic silt;
Foundation on non-uniform soil; Foundation on rock; Excavation and bracing; Sheet pile, cofferdam &
bulkhead; Damages due to construction operations.

Course Conducted By
zayanta chandra
Daffodil Polytechnic Institute
This course is for: Diploma in Engineering (Civil 4th Semester)

Objectives of the Course:
• To enable in learning detail drawing of building components.
• To enable to undrstand and perform computer-aided design (AutoCAD).
• To be able to prepare a production drawing of a multi‐storied building.
• To be able to prepare detail drawing of building components.
• To be able to acquire knowledge and skill to prepare detail working drawing of a scheme.
• To be able to interpret the structural drawings of a multi‐storied building.
• To be able to prepare production drawings of multi‐storied buildings adopting CAD.

Short Description:
Computer-Aided Design (CAD) and plotting; 2D & 3D CAD commands; Multi‐storied building (CAD); Detail working drawing (CAD) of RCC column with footing; Lintel with sunshade; Retaining wall; Foundation, Beam, Slab, Staircase, ramp and lift core; Underground water reservoir; Septic tank.

Introduction to estimating, Quantity estimation of excavating tank, road embankment, canal digging,
Steps, boundary wall, bituminous & RCC road, estimate of a single storied two-roomed building with
Verandah and double storied building, rate analysis.

Civic and Social Sciences; Individual and Society; Nation and Nationality; Citizenship; state and government; Law; Constitution Government and its organs;
public Opinion; Political Party; UNO And its organs; Scope and importance of Economics; Basic concepts of Economics- Utility, Wealth, consumption, income
wages and salary and savings; Production- meaning, nature, factors and laws; demand and supply; Current economic problems of Bangladesh; Role of Diploma
engineers in the economic development of Bangladesh; Occupations and career planning; Engineering team.

Accounting Theory And Practice (65851) / Bookkeeping And Accounting (5851)

 To be able to understand the principles and practices of book keeping and accounting.
 To be able to understand the procedures of general accounting, financial accounting and their applications.
 To be able to understand the concept of income tax, VAT and Public works accounts.

SHORT DESCRIPTION
Concept of book keeping and accounting; Transactions; Entry systems; Accounts; Journal; Ledger; Cash Book; Trial Balance; Final Accounts; Cost Account and Financial Accounting; Income Tax; Public works Accounts.

Industrial Management (65852)

* To be able to develop the working condition in the field of industrial or other organization.
* To be able to understand develop the labor management relation in the industrial sector.
* To be able to develop the management techniques in the process of decision making.
* To be able to manage the problems created by trade union.
* To be able to understand planning.
* To be able to perform the marketing.
* To able to maintain inventory.

 SHORT DESCRIPTION
Basic concept of management; Principles of management; planning, Organization, Scientific management; span of supervision; Motivation; Personal Management & human relation ; Staffing and manpower planning; Training of Staff; Concepts and techniques of decision making; Concept of Leadership; Concept of trade union; Inventory control; Economic lot size; Break even analysis; Trade Union and industrial dispute, Marketing.

Prepared By: Benojir Tabassum
Instructor
Deffodil Polytechnic Institute