All Courses
Garment Manufacturing-2
CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
2 hours 48 minutes
19 steps
Basic Electronics (26811)
Course Conducted By
Md. Badeuzzamal Sarker
Instructor, Electrical Technology
Daffodil Polytechnic Institute
Course Conducted By
RUBEL HOSSEN
Instructor
Daffodil Polytechnic Institute
OBJECTIVES:
To provide the understanding skill on Electronic Components, Electronic measuring and testing equipment.
To provide understanding and skill on the basic concept of semiconductor junction and to identify physically a
range of semiconductor diodes.
To develop comprehensive knowledge and skill on special diodes and devices.
To develop the abilities to construct different rectifier circuits.
To provide understanding of the basic concept and principle of transistor and to identify physically a range of
transistor.
To provide understanding and skill on the basic concept of logic gates.
SHORT DESCRIPTION:
Electronic components; measuring and test equipment; color code and soldering; semiconductor; P-N junction
diode; special diodes and devices; power supply; transistor; transistor amplifier; logic gates.
Md. Badeuzzamal Sarker
Instructor, Electrical Technology
Daffodil Polytechnic Institute
Course Conducted By
RUBEL HOSSEN
Instructor
Daffodil Polytechnic Institute
OBJECTIVES:
To provide the understanding skill on Electronic Components, Electronic measuring and testing equipment.
To provide understanding and skill on the basic concept of semiconductor junction and to identify physically a
range of semiconductor diodes.
To develop comprehensive knowledge and skill on special diodes and devices.
To develop the abilities to construct different rectifier circuits.
To provide understanding of the basic concept and principle of transistor and to identify physically a range of
transistor.
To provide understanding and skill on the basic concept of logic gates.
SHORT DESCRIPTION:
Electronic components; measuring and test equipment; color code and soldering; semiconductor; P-N junction
diode; special diodes and devices; power supply; transistor; transistor amplifier; logic gates.
1 day 4 hours 1 minute
82 steps
Fabric Manufacturing 1 (21231)
CONDUCTED BY:
Asif Shahriar
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION
To develop basic knowledge regarding the preparatory process of fabric manufacture.
To develop the skill of the students, in the weaving preparatory process.
To familiarize the students, with different types of loom.
To provide skill on the basic concept of knitting.
SHORT DESCRIPTION OF BOOKS STUDIES:
The basic concept of fabric weaving processes like winding; Warping; Sizing; Denting & drafting; Read & heald count; Weaving; Power loom; Loom motion & basic idea of knitting
Asif Shahriar
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION
To develop basic knowledge regarding the preparatory process of fabric manufacture.
To develop the skill of the students, in the weaving preparatory process.
To familiarize the students, with different types of loom.
To provide skill on the basic concept of knitting.
SHORT DESCRIPTION OF BOOKS STUDIES:
The basic concept of fabric weaving processes like winding; Warping; Sizing; Denting & drafting; Read & heald count; Weaving; Power loom; Loom motion & basic idea of knitting
3 hours 41 minutes
14 steps
Textile Testing & Quality Control- II
CONDUCTED BY:
Asif Shahriar
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Asif Shahriar
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
1 hour 41 minutes
18 steps
Clothing-I (1954)
SHORT DESCRIPTION:
Garments; Garment accessories; Tailoring process; Pattern making; Marker; Cutting machines; Fabric spreading; Seam & sewing
Garments; Garment accessories; Tailoring process; Pattern making; Marker; Cutting machines; Fabric spreading; Seam & sewing
1 hour 48 minutes
15 steps
Clothing II (1962)
CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION OF THIS COURSE:
• Our student will develop understanding and skill on operating different sewing machine. sewing of garments by using different types of sewing machine
• Our student can operating different sewing machine.
• Our student can get knowledge of different work aid of sewing machine.
• Our student can get knowledge of Interlining.
• Our student can get knowledge of Garments Finishing.
• Our student can get knowledge of care level code.
After completing the Course student will have knowledge about different sewing machine, sewing of garments by using different types of sewing machine, knowledge of different work aid of sewing machine, Interlining, Garments finishing & Garments care level code.
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION OF THIS COURSE:
• Our student will develop understanding and skill on operating different sewing machine. sewing of garments by using different types of sewing machine
• Our student can operating different sewing machine.
• Our student can get knowledge of different work aid of sewing machine.
• Our student can get knowledge of Interlining.
• Our student can get knowledge of Garments Finishing.
• Our student can get knowledge of care level code.
After completing the Course student will have knowledge about different sewing machine, sewing of garments by using different types of sewing machine, knowledge of different work aid of sewing machine, Interlining, Garments finishing & Garments care level code.
1 hour 18 minutes
8 steps
Textile Calculation-2 (1977)
CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
INTENTION
To develop the basic knowledge to calculate :
a) Winding b) Warping
c) Sizing d) Loom and knitting production.
e) Read count and heald count. f) Fabric calculation
g) Fabric requirement in garment. h) Sewing thread consumption
i) Costing j) Gearing Calculation
SHORT DESCRIPTION:
Calculation of winding; Calculation of warping; Calculation of sizing;Calculation of heald count and Reed count; Calculation of loom and
knitting productions,Cloth calculation; Calculation of cloth requirement in garments; Sewing thread consumption & costing.
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
INTENTION
To develop the basic knowledge to calculate :
a) Winding b) Warping
c) Sizing d) Loom and knitting production.
e) Read count and heald count. f) Fabric calculation
g) Fabric requirement in garment. h) Sewing thread consumption
i) Costing j) Gearing Calculation
SHORT DESCRIPTION:
Calculation of winding; Calculation of warping; Calculation of sizing;Calculation of heald count and Reed count; Calculation of loom and
knitting productions,Cloth calculation; Calculation of cloth requirement in garments; Sewing thread consumption & costing.
2 hours 53 minutes
14 steps
System Analysis & Design (66671)
Subject Teacher : Md.Rajib Ahamed (Instructor).
Subject Name : System Analysis and Design.
Subject Code : 66671
Technology : Computer.
Semester : 7th
Reference Book Name :
1). System Analysis and Design (Publisher: Hoque Publication).
2). System Analysis and Design - Elias M. Awad
3). Analysis and Design of Information Systems - V. Rajaraman
4). System Analysis and Design Methods - Whitten, Bently, Barlow
Subject Aims:
To provide the students with an opportunity to acquire knowledge, skill and attitude in the fields of system analysis, design and computer based development with special emphasis on system concept, system development life cycle, system analysis, system design & Development, implementation & Information security and object-oriented system design.
Subject Outcome:
System concept, system development life cycle, system analysis, system design & Development, implementation& Information security and object-oriented system design.
Subject Name : System Analysis and Design.
Subject Code : 66671
Technology : Computer.
Semester : 7th
Reference Book Name :
1). System Analysis and Design (Publisher: Hoque Publication).
2). System Analysis and Design - Elias M. Awad
3). Analysis and Design of Information Systems - V. Rajaraman
4). System Analysis and Design Methods - Whitten, Bently, Barlow
Subject Aims:
To provide the students with an opportunity to acquire knowledge, skill and attitude in the fields of system analysis, design and computer based development with special emphasis on system concept, system development life cycle, system analysis, system design & Development, implementation & Information security and object-oriented system design.
Subject Outcome:
System concept, system development life cycle, system analysis, system design & Development, implementation& Information security and object-oriented system design.
2 days 7 hours 16 minutes
35 steps
Multimedia Application (69475)
Shuva Sarker
Jr. Instructor
Telecommunication Department
Daffodil Polytechnic Institute
Jr. Instructor
Telecommunication Department
Daffodil Polytechnic Institute
2 hours 7 minutes
22 steps
Construction Process-2 (26441)
Course Conducted by
Md. Emon Khan.
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester Civil)
AIMS
After completion of the course the students will be able to:
Understand the construction process of arch and lintel.
Understand the construction process of different types of floor.
Understand the construction process of stairs.
Understand the construction process of different types of roof.
Understand the different finishing works in building.
Understand the construction process of doors and windows.
Understand the different operation and maintenance construction equipment.
Understand the construction of bridge, culvert, canals etc.
SHORT DESCRIPTION
Arches; Lintels; Ground floors; Upper floors; Damp proofing; Termite treatment; Stairs; Roof; Pitched
roof; Plastering and pointing; Doors; Windows; Carpentry and joinery; Scaffolding; Form works, Pointing
& Varnishing, construction equipment, Building Services, Insulation, bridge/culverts and canals etc.
Md. Emon Khan.
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester Civil)
AIMS
After completion of the course the students will be able to:
Understand the construction process of arch and lintel.
Understand the construction process of different types of floor.
Understand the construction process of stairs.
Understand the construction process of different types of roof.
Understand the different finishing works in building.
Understand the construction process of doors and windows.
Understand the different operation and maintenance construction equipment.
Understand the construction of bridge, culvert, canals etc.
SHORT DESCRIPTION
Arches; Lintels; Ground floors; Upper floors; Damp proofing; Termite treatment; Stairs; Roof; Pitched
roof; Plastering and pointing; Doors; Windows; Carpentry and joinery; Scaffolding; Form works, Pointing
& Varnishing, construction equipment, Building Services, Insulation, bridge/culverts and canals etc.
2 hours 59 minutes
26 steps
Water Resource Engineering (26461)
Course Conducted by
Md. Emon Khan
Jr.Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (6th Semester,Civil)
AIMS
• To provide understanding on the influence of the climatic condition of Bangladesh on its ground
water and surface water flow
• To provide understanding of recharging of underground water and ascertain its necessity in
Bangladesh.
• To enable to select a suitable source of water and method of irrigation for particular situation.
• To enable to select a suitable method of drainage for particular situation.
• To enable to select a suitable method for control of rivers and flood in Bangladesh.
• To understand rain water harvesting.
SHORT DESCRIPTION
Sources of water; Rainfall and run-off; Lifting of underground water; Storing and Recharging of
ground/rain water; Irrigation and its effect; Well irrigation; Water requirements for crops; and quality
of irrigation water; Storage reservoir; Dam and dyke; Irrigation canals; Silt deposit; Scouring; Canal
works; Drainage; River training works; Flood and flood management and flood control; Irrigation
projects in Bangladesh.
Md. Emon Khan
Jr.Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (6th Semester,Civil)
AIMS
• To provide understanding on the influence of the climatic condition of Bangladesh on its ground
water and surface water flow
• To provide understanding of recharging of underground water and ascertain its necessity in
Bangladesh.
• To enable to select a suitable source of water and method of irrigation for particular situation.
• To enable to select a suitable method of drainage for particular situation.
• To enable to select a suitable method for control of rivers and flood in Bangladesh.
• To understand rain water harvesting.
SHORT DESCRIPTION
Sources of water; Rainfall and run-off; Lifting of underground water; Storing and Recharging of
ground/rain water; Irrigation and its effect; Well irrigation; Water requirements for crops; and quality
of irrigation water; Storage reservoir; Dam and dyke; Irrigation canals; Silt deposit; Scouring; Canal
works; Drainage; River training works; Flood and flood management and flood control; Irrigation
projects in Bangladesh.
4 hours 50 minutes
22 steps
Fabric Structure and Analysis-01 (1966)
Course Created By
Asif Shahriar
Instructor, Textile & GDPM
Daffodil Polytechnic Institute
AIMS :
● To develop the basic knowledge required for structural design of fabric.
● To develop the skill of the student in textile design.
● To familiarize the student with different Plain & Twill weave.
● To acquire knowledge of different structured fabrics.
SHORT DESCRIPTION :
Basic concept of Textile design; Artistic design; Drafting & lifting plan; Weave plan; Plain weave; Twill weave; Diamond; Diaper; Broken twill; Stepped twill & standard commercial fabrics.
Asif Shahriar
Instructor, Textile & GDPM
Daffodil Polytechnic Institute
AIMS :
● To develop the basic knowledge required for structural design of fabric.
● To develop the skill of the student in textile design.
● To familiarize the student with different Plain & Twill weave.
● To acquire knowledge of different structured fabrics.
SHORT DESCRIPTION :
Basic concept of Textile design; Artistic design; Drafting & lifting plan; Weave plan; Plain weave; Twill weave; Diamond; Diaper; Broken twill; Stepped twill & standard commercial fabrics.
4 hours 59 minutes
29 steps
Telecom workshop and outside plant (29431)
This created by
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
5 hours 44 minutes
28 steps
Yarn Manufacturing 3 (1951)
CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
AIMS
To enable the students with an opportunity to acquire knowledge, skill and attitude in the area of yarn manufacturing with special emphasis on
• Roving Frame/Speed frame/Simplex
• Ring frame
• Conditioning
• Winding
• Reeling
• Bundling and baling
• Waste
SHORT DESCRIPTION
The basic concept of ring-spinning frame; Component parts of the ring-spinning frame; Drafting and roller setting; Ring, traveler & spindle of ring-spinning frame; Faults, change places and waste in spinning; Conditioning of yarn; Winding; Reeling; Bundling and baling; jute spinning frame; Draft & Twist of spinning frame; Building & winding; Technical aspects of spinning frame; Waste in cotton spinning.
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
AIMS
To enable the students with an opportunity to acquire knowledge, skill and attitude in the area of yarn manufacturing with special emphasis on
• Roving Frame/Speed frame/Simplex
• Ring frame
• Conditioning
• Winding
• Reeling
• Bundling and baling
• Waste
SHORT DESCRIPTION
The basic concept of ring-spinning frame; Component parts of the ring-spinning frame; Drafting and roller setting; Ring, traveler & spindle of ring-spinning frame; Faults, change places and waste in spinning; Conditioning of yarn; Winding; Reeling; Bundling and baling; jute spinning frame; Draft & Twist of spinning frame; Building & winding; Technical aspects of spinning frame; Waste in cotton spinning.
29 minutes
19 steps
Fabric Manufacturing 3 (1952)
CONDUCTED BY:
Md.Ashikur Rahman
Department of Textile Engineering
Daffodil Polytechnic Institute
Subject Aims:
1. To develop the basic knowledge regarding Fabric manufacturing
2. To develop knowledge & skill about different motions
3. To acquire knowledge to make different fabric shedding mechanisms, stop motion
Subject Outcome:1. To know the process of fabric manufacturing
2. Understand properly the process of stop motions, and shedding mechanisms.
Md.Ashikur Rahman
Department of Textile Engineering
Daffodil Polytechnic Institute
Subject Aims:
1. To develop the basic knowledge regarding Fabric manufacturing
2. To develop knowledge & skill about different motions
3. To acquire knowledge to make different fabric shedding mechanisms, stop motion
Subject Outcome:1. To know the process of fabric manufacturing
2. Understand properly the process of stop motions, and shedding mechanisms.
6 hours 19 minutes
26 steps
Production Planning & Control (7074)
CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION
1. To develop the basic knowledge regarding production control
2. To develop knowledge & skill about different planning
3. To acquire knowledge to make different inventory control
4. To acquire knowledge to know different production calculation
SHORT DESCRIPTION ABOUT BOOKS STUDIES:
Production system; division of labor; production planning; localization of industry; time study and motion study; selection of factory site; factory building; plant layout; equipment layout; operation of the factory; production control; quality control; cost control; inventory control; materials handling; case study.
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION
1. To develop the basic knowledge regarding production control
2. To develop knowledge & skill about different planning
3. To acquire knowledge to make different inventory control
4. To acquire knowledge to know different production calculation
SHORT DESCRIPTION ABOUT BOOKS STUDIES:
Production system; division of labor; production planning; localization of industry; time study and motion study; selection of factory site; factory building; plant layout; equipment layout; operation of the factory; production control; quality control; cost control; inventory control; materials handling; case study.
47 minutes
27 steps
Mobile Communication Networks (68451)
Mobile Communication Networks
This created by
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
Concept of mobile communication and network; Cellular concept and its initial implementations; Digital
cellular mobile systems; Cordless communications systems (CT2, DECT, PACS and PHS); Mobile data
communication systems; Third generation mobile communication system; telecommunication
management network (TMN) and signaling system; concept of TDMA cellular mobile communication;
concept of CDMA cellular mobile communication; Global mobile satellite systems; Numbers and
identities for mobile communication services; performance benchmarks for mobile; Traffic engineering
and tracking system.
This created by
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
Concept of mobile communication and network; Cellular concept and its initial implementations; Digital
cellular mobile systems; Cordless communications systems (CT2, DECT, PACS and PHS); Mobile data
communication systems; Third generation mobile communication system; telecommunication
management network (TMN) and signaling system; concept of TDMA cellular mobile communication;
concept of CDMA cellular mobile communication; Global mobile satellite systems; Numbers and
identities for mobile communication services; performance benchmarks for mobile; Traffic engineering
and tracking system.
1 day 1 hour 20 minutes
32 steps
Textile Calculation (21164)
CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
To develop basic knowledge of calculation about cotton spinning such as-
a) Blow room
b) Carding
c) Draw frame
d) Simplex
e) Ring frame.
To develop basic knowledge of calculation about different yarn numbering system & moisture relative of textiles.
SHORT DESCRIPTION:
Blow room calculation; Carding calculation; Drawing calculation; Simplex calculation; Ring frame calculation & calculation of yarn numbering.
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
To develop basic knowledge of calculation about cotton spinning such as-
a) Blow room
b) Carding
c) Draw frame
d) Simplex
e) Ring frame.
To develop basic knowledge of calculation about different yarn numbering system & moisture relative of textiles.
SHORT DESCRIPTION:
Blow room calculation; Carding calculation; Drawing calculation; Simplex calculation; Ring frame calculation & calculation of yarn numbering.
2 hours 31 minutes
51 steps
Wet Processing-1 (21341)
Course Conducted by
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
3 hours 26 minutes
17 steps
Radio & TV Engineering (29441)
(69441)Television Transmission And Reception
Created by
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
SHORT DESCRIPTION
Television system, Working principles of TV cameras, picture tube, transmitters and receivers,
Television signal, Television Signal Generation, Transmission and Propagation, Modern Television –
Transmission and Reception, Advanced Television systems and digital studio equipments, Cable
Television, teletext broadcast services, Satellite home receiving system and its networking, Video
recording & play back (VHS, Bmax, U-matic , video 2000, DV and HDV), Storage system, Television
studio and Automation and Features of remote control
Created by
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
SHORT DESCRIPTION
Television system, Working principles of TV cameras, picture tube, transmitters and receivers,
Television signal, Television Signal Generation, Transmission and Propagation, Modern Television –
Transmission and Reception, Advanced Television systems and digital studio equipments, Cable
Television, teletext broadcast services, Satellite home receiving system and its networking, Video
recording & play back (VHS, Bmax, U-matic , video 2000, DV and HDV), Storage system, Television
studio and Automation and Features of remote control
9 hours 39 minutes
51 steps
Networks, Filters & Transmission Lines (66841)
(66841)Networks, Filters & Transmission Lines
Created by
Shuva Sarker
Junior Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
SHORT DESCRIPTION
Network theorems, Four terminal networks; Half section network; Attenuators and filters; Transmission line; Line
constant & impedance matching; Antenna; Propagation of radio wave; Effect of earth curvature & ionosphere on
wave propagation.
Created by
Shuva Sarker
Junior Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
SHORT DESCRIPTION
Network theorems, Four terminal networks; Half section network; Attenuators and filters; Transmission line; Line
constant & impedance matching; Antenna; Propagation of radio wave; Effect of earth curvature & ionosphere on
wave propagation.
7 hours 35 minutes
17 steps
Communication Engineering (26842)
Communication Engineering (26842)
Created by
Shuva Sarker
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute.
SHORT DESCRIPTION
Communication networks; Modulation; Demodulation Receiver and Transmitter; Telephone system;
Digital communication; Communication switching system; Optical fiber; Satellite communication; Digital
Communication, Modem and mobile communications.
Created by
Shuva Sarker
Instructor
Telecommunication Technology
Daffodil Polytechnic Institute.
SHORT DESCRIPTION
Communication networks; Modulation; Demodulation Receiver and Transmitter; Telephone system;
Digital communication; Communication switching system; Optical fiber; Satellite communication; Digital
Communication, Modem and mobile communications.
22 hours 34 minutes
22 steps
Basics of Telecommunication (29411)
Course Conducted By
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 1st Semester)
Objectives of the Course
After completion of the course students will be able to:
Basic Telephony (1G, 2G, 3G, 4G,LTE And UMTS)
o Wireless and Cellular/Mobile Radio
o Wi-MAX, Wi-Fi, VOIP, PCS
o Local and Long-Distance Communications
o Image Communications
o Transmission Media , Media Gateway Control Protocol
o Telephone switching
o Voice over Internet Protocol (VoIP) and VoIP Gateway
o Telephony and Telegraph system, (NWD, ISD and PSTN)
o Telecommunication standardization organization
o OSI Model
o Bangladesh Telecommunication Regulatory Commission , function , Acts, mission and vision of BTRC
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 1st Semester)
Objectives of the Course
After completion of the course students will be able to:
Basic Telephony (1G, 2G, 3G, 4G,LTE And UMTS)
o Wireless and Cellular/Mobile Radio
o Wi-MAX, Wi-Fi, VOIP, PCS
o Local and Long-Distance Communications
o Image Communications
o Transmission Media , Media Gateway Control Protocol
o Telephone switching
o Voice over Internet Protocol (VoIP) and VoIP Gateway
o Telephony and Telegraph system, (NWD, ISD and PSTN)
o Telecommunication standardization organization
o OSI Model
o Bangladesh Telecommunication Regulatory Commission , function , Acts, mission and vision of BTRC
6 hours 13 minutes
30 steps
Digital Electronics-1 (26831)
Course Conducted By
MD. Badeuzzamal Sarker
Instructor
Electrical Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (CMT 4th Semester)
Objectives of the Course
After completion of the course students will be able to:
You will get concept of digital electronics; Logic gates, Boolean algebra and logic simplification &Combinational logic circuits.
MD. Badeuzzamal Sarker
Instructor
Electrical Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (CMT 4th Semester)
Objectives of the Course
After completion of the course students will be able to:
You will get concept of digital electronics; Logic gates, Boolean algebra and logic simplification &Combinational logic circuits.
20 hours 43 minutes
33 steps
Wireless and Mobile Communication (29462)
Course Conducted By
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 6th Semester)
Objectives of the Course
After completion of the course students will be able to:
Introduction to Wireless communication, Modern wireless communication system, third generation(3G) wireless
network, fourth generation(4G) wireless network, cellular network, Amplitude Modulation(AM), Frequency
Modulation(FM), Linear Modulation technique, Constant envelope modulation technique, equalization, diversity
and channel coding, polarization diversity, frequency diversity, time diversity, different types of multiple access,
packet radio protocols, several types of wireless network, wireless system standard and 4th Industrial Revolutions.
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 6th Semester)
Objectives of the Course
After completion of the course students will be able to:
Introduction to Wireless communication, Modern wireless communication system, third generation(3G) wireless
network, fourth generation(4G) wireless network, cellular network, Amplitude Modulation(AM), Frequency
Modulation(FM), Linear Modulation technique, Constant envelope modulation technique, equalization, diversity
and channel coding, polarization diversity, frequency diversity, time diversity, different types of multiple access,
packet radio protocols, several types of wireless network, wireless system standard and 4th Industrial Revolutions.
12 hours 4 minutes
44 steps
Microwave and Antennas
Course Conducted By
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 6th Semester)
Objectives of the Course
After completion of the course students will be able to:
Concept of Microwave, Microwave components; Wave guide; Microwave tubes; Microwave
measurements; Semiconductor microwave devices; Propagation models: Microwave antenna.
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 6th Semester)
Objectives of the Course
After completion of the course students will be able to:
Concept of Microwave, Microwave components; Wave guide; Microwave tubes; Microwave
measurements; Semiconductor microwave devices; Propagation models: Microwave antenna.
22 hours 48 minutes
39 steps
Data Communication System for 4th CMT-A / 6th TCT (66644)
Subject Teacher: Md. Rajib Ahamed(Instructor)
Subject Name: Data CommunicationSystem
Subject Code: 66644
Technology: Computer
Semester: 4th-A
Reference Book: Computer Networks. By ANDREW S.TANENBAUM
Text Book: Data Communication System
(Publisher: HaqueProkashani / Technical Prokashoni)
INTENTION
AIMS
• To be able to acquire the knowledge on data communication Basics.
• To be able to provide the knowledge and to develop skill on signal and data transmission systems and transmission media.
• To be able to acquire the knowledge on Digital communication and computer networks.
• To be able to provide the knowledge and to develop skill on network topologies and protocols.
• To be able to provide the knowledge and to develop skill on MODEM, Hub, Switch, NICand Repeater.
• To be able to establish and implement a LAN to provide Network services.
SHORT DESCRIPTION
Communication Basics; Analog and Digital Modulation and Demodulation; Analog and Digital communication; Transmission media and connectors; LAN, Network fundamentals; Peer‐peer & Client‐Server techniques; Topologies and protocols; NIC; Network Addressing; IP address and Subnet Mask.
Subject Name: Data CommunicationSystem
Subject Code: 66644
Technology: Computer
Semester: 4th-A
Reference Book: Computer Networks. By ANDREW S.TANENBAUM
Text Book: Data Communication System
(Publisher: HaqueProkashani / Technical Prokashoni)
INTENTION
AIMS
• To be able to acquire the knowledge on data communication Basics.
• To be able to provide the knowledge and to develop skill on signal and data transmission systems and transmission media.
• To be able to acquire the knowledge on Digital communication and computer networks.
• To be able to provide the knowledge and to develop skill on network topologies and protocols.
• To be able to provide the knowledge and to develop skill on MODEM, Hub, Switch, NICand Repeater.
• To be able to establish and implement a LAN to provide Network services.
SHORT DESCRIPTION
Communication Basics; Analog and Digital Modulation and Demodulation; Analog and Digital communication; Transmission media and connectors; LAN, Network fundamentals; Peer‐peer & Client‐Server techniques; Topologies and protocols; NIC; Network Addressing; IP address and Subnet Mask.
14 hours 45 minutes
12 steps
Computer Architecture & Microprocessor for 5th CMT (28553)
Subject Teacher : Md. Rajib Ahamed (Instructor).
S Subject Name : Microprocessor & Interfacing.
S Subject Code : 66662
T Technology : Computer.
Semester : 6th
Reference Book Name : Microprocessor & Interfacing (Publisher: Hoque Publication). The 8086 and 80286 Microprocessor - Avatar Singh. Microprocessors and Interfacing: Programming and Hardware - Douglas V. Hall.
Subject Aims:
To be able to acquire the knowledge on microprocessor, microcomputer.
To be able to develop the knowledge and skill on the architecture and assembly
Language programming of 16- bit microprocessor.
To be able to acquire the knowledge and skill on memory, interrupt and I/O
Interfacing.
Subject Outcome:
⮚ Concept of microprocessor, Basic conception of microprocessor and microcomputer, Architecture
and addressing mode of Intel 8086p.
⮚ Instruction timing of Intel 8086 p; Memory, input /output and interrupt interfacing of Intel 8086
p.
Interfacing principle and peripheral devices; programming of Intel 8086/8088; Intel x86 family,
multi-core processor idea.
S Subject Name : Microprocessor & Interfacing.
S Subject Code : 66662
T Technology : Computer.
Semester : 6th
Reference Book Name : Microprocessor & Interfacing (Publisher: Hoque Publication). The 8086 and 80286 Microprocessor - Avatar Singh. Microprocessors and Interfacing: Programming and Hardware - Douglas V. Hall.
Subject Aims:
To be able to acquire the knowledge on microprocessor, microcomputer.
To be able to develop the knowledge and skill on the architecture and assembly
Language programming of 16- bit microprocessor.
To be able to acquire the knowledge and skill on memory, interrupt and I/O
Interfacing.
Subject Outcome:
⮚ Concept of microprocessor, Basic conception of microprocessor and microcomputer, Architecture
and addressing mode of Intel 8086p.
⮚ Instruction timing of Intel 8086 p; Memory, input /output and interrupt interfacing of Intel 8086
p.
Interfacing principle and peripheral devices; programming of Intel 8086/8088; Intel x86 family,
multi-core processor idea.
22 hours 49 minutes
49 steps
Clothing 1 (1954)
CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
AIMS
To enable the student a clear idea of garments.
To develop basic knowledge and skill of garment cloth.
To develop basic knowledge of garment accessories.
SHORT DESCRIPTION:
Garments; Garment accessories; Tailoring process; Patternmaking; Marker; Cutting machines; Fabric spreading; Seam & sewing.
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
AIMS
To enable the student a clear idea of garments.
To develop basic knowledge and skill of garment cloth.
To develop basic knowledge of garment accessories.
SHORT DESCRIPTION:
Garments; Garment accessories; Tailoring process; Patternmaking; Marker; Cutting machines; Fabric spreading; Seam & sewing.
38 minutes
11 steps
General Textile Processing-I (21111)
CONDUCTED BY:
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute
After undergoing the subject, students will be able to:
Identify machineries of cotton and jute yarn manufacturing.
Identify process sequence for cotton and jute fibers.
Identify grading, batch, batching, emulsion preparation and softening for jute yarn manufacturing.
Determine winding packages.
Identify warp beams.
Demonstrate power looms.
Identify maintenance tools and their uses.
Observe machine gears
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute
After undergoing the subject, students will be able to:
Identify machineries of cotton and jute yarn manufacturing.
Identify process sequence for cotton and jute fibers.
Identify grading, batch, batching, emulsion preparation and softening for jute yarn manufacturing.
Determine winding packages.
Identify warp beams.
Demonstrate power looms.
Identify maintenance tools and their uses.
Observe machine gears
3 steps
Sequential Logic System (66653)
Subject Teacher : Md. Rajib Ahamed (Instructor)
Subject Name : Sequential Logic System.
Subject Code : 66653
Technology : Computer Technology.
Semester : 5th
BTEB Text Book Name : Sequential Logic System (Publisher: Technical Prokashani)
Reference Book/Note Name:
1. Digital principles and application − Albert PaulMalvino.
2. Digital Computer Electronics− Albert PaulMalvino.
3. Digital Systems–Ronald J.Tocci.
4. Modern Digital Electronics - R. P. Jain.
5. Class note paper.
Subject Aims:
• To be able to acquire the knowledge & skill on Flip Flop, counters, shift registers and their applications.
• To be able to acquire the knowledge & skill on semiconductor memories & ALU.
• To be able to acquire the knowledge & skill on A/D and D/A converters.
• To familiarize with PLD & simple computer (SAP-1& SAP-2).
Subject Outcome:
Synchronous optical network;
Integrated services digital network;
Asynchronous transfer mode; Wireless internet;
Multimedia communication over IP network;
Computer telephony integration and unified messaging;
Telecommunication management network and Information security.
Subject Name : Sequential Logic System.
Subject Code : 66653
Technology : Computer Technology.
Semester : 5th
BTEB Text Book Name : Sequential Logic System (Publisher: Technical Prokashani)
Reference Book/Note Name:
1. Digital principles and application − Albert PaulMalvino.
2. Digital Computer Electronics− Albert PaulMalvino.
3. Digital Systems–Ronald J.Tocci.
4. Modern Digital Electronics - R. P. Jain.
5. Class note paper.
Subject Aims:
• To be able to acquire the knowledge & skill on Flip Flop, counters, shift registers and their applications.
• To be able to acquire the knowledge & skill on semiconductor memories & ALU.
• To be able to acquire the knowledge & skill on A/D and D/A converters.
• To familiarize with PLD & simple computer (SAP-1& SAP-2).
Subject Outcome:
Synchronous optical network;
Integrated services digital network;
Asynchronous transfer mode; Wireless internet;
Multimedia communication over IP network;
Computer telephony integration and unified messaging;
Telecommunication management network and Information security.
15 hours 46 minutes
52 steps
Textile Testing & Quality Control- 1 (1944)
CONDUCTED BY:
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute
Subject Aims:
Basic aspects of textile testing, humidity, moisture in textiles, sampling, identification of textile fibers, fiber length & its measurement, fiber strength & its measurement, Trash, naps & their measurement, fiber fineness &its measurement, micromere value, fiber maturity
Subject Outcome:
Students will be understood with an opportunity to acquire knowledge & skill about Testing,
Techniques & System of Testing. Operating system of different modern Testing instruments,
Interpretation & Analysis of testing data uses & Maintenance of testing instruments.
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute
Subject Aims:
Basic aspects of textile testing, humidity, moisture in textiles, sampling, identification of textile fibers, fiber length & its measurement, fiber strength & its measurement, Trash, naps & their measurement, fiber fineness &its measurement, micromere value, fiber maturity
Subject Outcome:
Students will be understood with an opportunity to acquire knowledge & skill about Testing,
Techniques & System of Testing. Operating system of different modern Testing instruments,
Interpretation & Analysis of testing data uses & Maintenance of testing instruments.
4 steps
Natural Textile Fiber(3rd Textile)
CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
5 hours 17 minutes
14 steps
Fabric Manufacturing-II(5051)
Conduct By
Sabina Yasmin
Instructor
Department of Textile & GDPM
Daffodil Polytechnic Institute
Sabina Yasmin
Instructor
Department of Textile & GDPM
Daffodil Polytechnic Institute
4 hours 56 minutes
15 steps
IT Support and IoT Basics (29441)
Course Conducted By
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 4th Semester)
Objectives of the Course
After completion of the course students will be able to:
This is a sector specific course of diploma in engineering program required for enabling the
graduates to use and work with ICT. It includes Concept of digital electronics, Number system
and binary arithmetic operation, Arithmetic codes and code conversion, Concept of logic gates,
Electronic circuit of logic gates, Digital ic’s Logic families, Logic simplification & circuit design,
Combinational logic circuits, Encoder and decoder, Multiplexers and DE-Multiplexer, Sequential
logic circuits. This course designed emphasis will be more on teaching practical aspect rather
than theory.
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 4th Semester)
Objectives of the Course
After completion of the course students will be able to:
This is a sector specific course of diploma in engineering program required for enabling the
graduates to use and work with ICT. It includes Concept of digital electronics, Number system
and binary arithmetic operation, Arithmetic codes and code conversion, Concept of logic gates,
Electronic circuit of logic gates, Digital ic’s Logic families, Logic simplification & circuit design,
Combinational logic circuits, Encoder and decoder, Multiplexers and DE-Multiplexer, Sequential
logic circuits. This course designed emphasis will be more on teaching practical aspect rather
than theory.
1 day 1 hour 37 minutes
56 steps
Python Programming for 2nd CST (28521)
Subject Teacher : Md. Rajib Ahamed (Instructor).
Subject Name : Python Programming
Subject Code : 28521
Technology : Computer Science & Technology
Semester : 2nd
Reference Book : (1). Python Programming (Publisher: Hoque Publication)
(2). Learning Python-Mark Lutz (5th Edition)
(3). Python Programming: An Introduction to Computer Science-John Zelle (3rd Edition)
(4). Python for Data Analysis: Data Wrangling with Pandas, NumPy and IPython-Wes Mckinney (2nd Edition)
(5). Learn Python the Hard Way-ZED SHAW (3rdEdition).
Subject Aims:
To provide the students with an opportunity to acquire knowledge, skills and attitude in the area. To develop knowledge and skill on programming and problem-solving. To develop knowledge and skill to create, compile, debug & execute a program.
Subject Outcome:
After undergoing the subject, students will be able to develop knowledge of the Basics of programming language, Basics of python, Variables and data types, String processing, Python operators, Branch, Loop, List, Tuple, Set, Dictionary structures, Function, and I/O operation of Python Programming Language.
Subject Name : Python Programming
Subject Code : 28521
Technology : Computer Science & Technology
Semester : 2nd
Reference Book : (1). Python Programming (Publisher: Hoque Publication)
(2). Learning Python-Mark Lutz (5th Edition)
(3). Python Programming: An Introduction to Computer Science-John Zelle (3rd Edition)
(4). Python for Data Analysis: Data Wrangling with Pandas, NumPy and IPython-Wes Mckinney (2nd Edition)
(5). Learn Python the Hard Way-ZED SHAW (3rdEdition).
Subject Aims:
To provide the students with an opportunity to acquire knowledge, skills and attitude in the area. To develop knowledge and skill on programming and problem-solving. To develop knowledge and skill to create, compile, debug & execute a program.
Subject Outcome:
After undergoing the subject, students will be able to develop knowledge of the Basics of programming language, Basics of python, Variables and data types, String processing, Python operators, Branch, Loop, List, Tuple, Set, Dictionary structures, Function, and I/O operation of Python Programming Language.
1 day 34 minutes
48 steps
Textile Testing & Quality Control- 1 (21151)
CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
8 hours 12 minutes
26 steps
Garments CAD & CAM-II
CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
1 hour 44 minutes
9 steps
Advanced Fabric Manufacturing-I (21261)
CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
2 hours 20 minutes
15 steps
Garments Washing & Dyeing
Learning Outcome (Theoretical):
1) Interpret different raw materials, chemicals, auxiliaries and machinery used for garments washing and dyeing.
2) Explain the working principles of the washing machine.
3) Describe various wet processes of garments washing.
4) Describe various dry processes of garments washing.
5) Explain the working principles of the dyeing machine.
6) Discuss different techniques and processes of garments dyeing
7) Illustrate garments accessories dyeing.
Learning Outcome (Practical):
1) Identify different dyes, chemicals, auxiliaries used for garments washing and dyeing.
2) Select appropriate washing and dyeing recipes.
3) Calculate the amount of dyes, chemicals, auxiliaries for garments washing and dyeing.
4) Identify the process sequence of different washing and dyeing operation.
5) Identify the effect of experimental results.
1) Interpret different raw materials, chemicals, auxiliaries and machinery used for garments washing and dyeing.
2) Explain the working principles of the washing machine.
3) Describe various wet processes of garments washing.
4) Describe various dry processes of garments washing.
5) Explain the working principles of the dyeing machine.
6) Discuss different techniques and processes of garments dyeing
7) Illustrate garments accessories dyeing.
Learning Outcome (Practical):
1) Identify different dyes, chemicals, auxiliaries used for garments washing and dyeing.
2) Select appropriate washing and dyeing recipes.
3) Calculate the amount of dyes, chemicals, auxiliaries for garments washing and dyeing.
4) Identify the process sequence of different washing and dyeing operation.
5) Identify the effect of experimental results.
2 hours 55 minutes
11 steps
Sensor & IOT System (28563)
Principle Concept:
Sensor & IoT System is the most significant area of diploma in Computer Science & Technology. To work with Sensor & IoT System should have the knowledge, skills and attitude of Sensor and IoT, IoT Architecture, Raspberry pi and Arduino, IoT Architecture, IoT devices, Connectivity in IoT, Security in IoT, Data analytics in IoT, IIoT in agriculture, IoT standards and interoperability, Regulatory and ethical considerations, Future trends in IoT and IIoT.
Learning Outcome (Theoretical):
After completing the subject, students will be able to:
1. Interpret Sensor and IoT
2. Illustrate IoT Architecture
3. Interpret Raspberry pi and Arduino.
4. Explain IoT Architecture
5. Explain IoT devices and sensors
6. Describe connectivity in IoT
7. Illustrate security in IoT
8. Describe data analytics in IoT
9. Explain IIoT in agriculture
10. Explain IoT standards and interoperability
11. Explain regulatory and ethical considerations
12. Describe future trends in IoT and IIoT
Sensor & IoT System is the most significant area of diploma in Computer Science & Technology. To work with Sensor & IoT System should have the knowledge, skills and attitude of Sensor and IoT, IoT Architecture, Raspberry pi and Arduino, IoT Architecture, IoT devices, Connectivity in IoT, Security in IoT, Data analytics in IoT, IIoT in agriculture, IoT standards and interoperability, Regulatory and ethical considerations, Future trends in IoT and IIoT.
Learning Outcome (Theoretical):
After completing the subject, students will be able to:
1. Interpret Sensor and IoT
2. Illustrate IoT Architecture
3. Interpret Raspberry pi and Arduino.
4. Explain IoT Architecture
5. Explain IoT devices and sensors
6. Describe connectivity in IoT
7. Illustrate security in IoT
8. Describe data analytics in IoT
9. Explain IIoT in agriculture
10. Explain IoT standards and interoperability
11. Explain regulatory and ethical considerations
12. Describe future trends in IoT and IIoT
1 hour 20 minutes
22 steps
Microcontroller Based System Design & Development (28564)
Principle Concept:
As electronic devices continue to play a vital role in our daily lives, the need for understanding Microcontroller and Embedded Systems becomes imperative. This course aims to equip Diploma in Engineering Level students with knowledge and skills related to Microcontroller Architecture, Programming, Interfacing within Embedded Systems, and practical applications in real-world projects.
Learning Outcome (Theoretical):
After completing the subject, students will be able to:
1. Interpret Microcontroller Architecture.
2. Write Program Microcontrollers using suitable IDEs.
3. State procedure to Interface the Microcontrollers with various sensors and actuators.
4. Comprehend communication protocols in Embedded Systems.
5. Explain Analog-to-Digital Conversion and PWM.
6. Develop and troubleshoot projects involving Microcontrollers and Embedded Systems.
7. Explain procedure of Interface with real world devices.
8. Illustrate mini development kit.
As electronic devices continue to play a vital role in our daily lives, the need for understanding Microcontroller and Embedded Systems becomes imperative. This course aims to equip Diploma in Engineering Level students with knowledge and skills related to Microcontroller Architecture, Programming, Interfacing within Embedded Systems, and practical applications in real-world projects.
Learning Outcome (Theoretical):
After completing the subject, students will be able to:
1. Interpret Microcontroller Architecture.
2. Write Program Microcontrollers using suitable IDEs.
3. State procedure to Interface the Microcontrollers with various sensors and actuators.
4. Comprehend communication protocols in Embedded Systems.
5. Explain Analog-to-Digital Conversion and PWM.
6. Develop and troubleshoot projects involving Microcontrollers and Embedded Systems.
7. Explain procedure of Interface with real world devices.
8. Illustrate mini development kit.
3 hours 47 minutes
40 steps
Sustainability in Textile Industry- 21342
Conduct by,
Emam Shad Ahmed
Sr. Instructor & Head
About Course: The textile industry is a significant contributor to the global economy, but it also has a significant impact on the environment being a second largest polluting industry in the world. The use of substantial amounts of water, energy, chemicals, and fibers in textile production leads to pollution and negative impacts on natural resources. Additionally, the industry also has a large carbon footprint due to the energy consumption requirement for production and transportation.
Incorporating sustainability into the textile industry is essential for protecting the socio-economic and environment economic viability. By implementing sustainable practices, textile companies can reduce their environmental impact, improve their social responsibility, and improve their bottom line.
This course aims at providing fundamental knowledge on sustainability principles as well as their application in the textile value chain. Furthermore, it highlights the emerging sustainability issues such as sustainable raw materials, energy efficient machines, renewable energy concept, responsible sourcing, and product development etc. in textile and apparel sector.
Emam Shad Ahmed
Sr. Instructor & Head
About Course: The textile industry is a significant contributor to the global economy, but it also has a significant impact on the environment being a second largest polluting industry in the world. The use of substantial amounts of water, energy, chemicals, and fibers in textile production leads to pollution and negative impacts on natural resources. Additionally, the industry also has a large carbon footprint due to the energy consumption requirement for production and transportation.
Incorporating sustainability into the textile industry is essential for protecting the socio-economic and environment economic viability. By implementing sustainable practices, textile companies can reduce their environmental impact, improve their social responsibility, and improve their bottom line.
This course aims at providing fundamental knowledge on sustainability principles as well as their application in the textile value chain. Furthermore, it highlights the emerging sustainability issues such as sustainable raw materials, energy efficient machines, renewable energy concept, responsible sourcing, and product development etc. in textile and apparel sector.
0 steps
Offset Machine Operation(29521)
Offset machine operation is a critical process in the printing industry, involving several meticulous steps to ensure high-quality results. Initially, the machine is prepared by collecting job information and setting up the machine according to this data. The inking unit is controlled by measuring pH levels, roller hardness, and adjusting the roller gap to regulate ink supply. The feeding unit is then prepared by setting the sucker and blower, adjusting guides, and maintaining the feed board height. Sheet control involves setting various lays, measuring paper thickness, and adjusting the double sheet detector. Plates and blankets are cleaned, prepared, and preserved to ensure quality. During the printing process, the press is made ready, run for production, and cleaned as needed, with strict control over print registration for multi-color jobs. Safety measures are followed meticulously, raw materials are handled carefully, and management plays a crucial role in accident prevention. Finally, the delivery unit is set up by adjusting guides and maintaining the delivery chain gripper. Detailed record-keeping throughout these steps is essential for consistent and high-quality printing outcomes.
35 minutes
15 steps
Image Carrier Preparation (29641)
Image Carrier preparation refers to the processes and techniques involved in creating the medium on which images will be printed using various printing technologies. The preparation process varies depending on the type of printing method being used, such as relief printing, planographic printing, intaglio printing, and screen printing. Each method requires specific materials, tools, and steps to ensure the quality and accuracy of the printed image.
### Types of Image Carriers and Their Preparation
1. Conventional Relief Printing:
involves preparing block and type forms.
uses materials like rubber and photopolymer plates.
Processes include making line blocks and half-tone blocks and handling photopolymer and rubber plates.
2. Modern Relief Printing:
utilizes digital flexo plates and various digital imaging technologies.
involves the use of digital imagers (DI) and different types of lasers for plate making.
3. Conventional Planographic Printing:
uses lithographic plates and involves the photomechanical process.
requires materials like Ps plates and involves graining processes to prepare the plate surface.
4. Modern Planographic Printing:
employs Employs Computer-to-Plate (CtP) technology and various digital imaging techniques.
includes auto plate exposure, processing of digitally imaged plates, and maintenance of image and non-image areas.
5. Intaglio Printing:
involves materials and equipment for gravure image preparation.
Processes include electroplating gravure cylinders, etching, and engraving.
6. Screen Printing:
utilizes raw materials, tools, and equipment for stencil making.
Methods include direct and indirect stencil making and Computer-to-Screen (CtS) processes.
### Learning Outcomes
**Theoretical:**
Understand image preparation processes for different printing technologies.
Differentiate between various types of image carriers.
Know the raw materials and chemicals used in image preparation.
Solve problems related to image preparation using different printing methods.
**Practical:**
Apply the tools and equipment used in screen printing.
Prepare various types of stencils and print on different substrates.
Operate screen-printing machines and presses.
These processes are essential for ensuring high-quality prints in various printing applications, from commercial printing to specialized artistic productions】.
### Types of Image Carriers and Their Preparation
1. Conventional Relief Printing:
involves preparing block and type forms.
uses materials like rubber and photopolymer plates.
Processes include making line blocks and half-tone blocks and handling photopolymer and rubber plates.
2. Modern Relief Printing:
utilizes digital flexo plates and various digital imaging technologies.
involves the use of digital imagers (DI) and different types of lasers for plate making.
3. Conventional Planographic Printing:
uses lithographic plates and involves the photomechanical process.
requires materials like Ps plates and involves graining processes to prepare the plate surface.
4. Modern Planographic Printing:
employs Employs Computer-to-Plate (CtP) technology and various digital imaging techniques.
includes auto plate exposure, processing of digitally imaged plates, and maintenance of image and non-image areas.
5. Intaglio Printing:
involves materials and equipment for gravure image preparation.
Processes include electroplating gravure cylinders, etching, and engraving.
6. Screen Printing:
utilizes raw materials, tools, and equipment for stencil making.
Methods include direct and indirect stencil making and Computer-to-Screen (CtS) processes.
### Learning Outcomes
**Theoretical:**
Understand image preparation processes for different printing technologies.
Differentiate between various types of image carriers.
Know the raw materials and chemicals used in image preparation.
Solve problems related to image preparation using different printing methods.
**Practical:**
Apply the tools and equipment used in screen printing.
Prepare various types of stencils and print on different substrates.
Operate screen-printing machines and presses.
These processes are essential for ensuring high-quality prints in various printing applications, from commercial printing to specialized artistic productions】.
16 steps