All Courses
Basic Electronics (26811)
Course Conducted By
PULAK BISWAS
Instructor, Electrical Technology
Daffodil Polytechnic Institute
Course Conducted By
MD SHAHRIYAR RAHMAN
Instructor
Daffodil Polytechnic Institute
Course Conducted By
RUBEL HOSSEN
Instructor
Daffodil Polytechnic Institute
OBJECTIVES:
To provide the understanding skill on Electronic Components, Electronic measuring and testing equipment.
To provide understanding and skill on the basic concept of semiconductor junction and to identify physically a
range of semiconductor diodes.
To develop comprehensive knowledge and skill on special diodes and devices.
To develop the abilities to construct different rectifier circuits.
To provide understanding of the basic concept and principle of transistor and to identify physically a range of
transistor.
To provide understanding and skill on the basic concept of logic gates.
SHORT DESCRIPTION:
Electronic components; measuring and test equipment; color code and soldering; semiconductor; P-N junction
diode; special diodes and devices; power supply; transistor; transistor amplifier; logic gates.
PULAK BISWAS
Instructor, Electrical Technology
Daffodil Polytechnic Institute
Course Conducted By
MD SHAHRIYAR RAHMAN
Instructor
Daffodil Polytechnic Institute
Course Conducted By
RUBEL HOSSEN
Instructor
Daffodil Polytechnic Institute
OBJECTIVES:
To provide the understanding skill on Electronic Components, Electronic measuring and testing equipment.
To provide understanding and skill on the basic concept of semiconductor junction and to identify physically a
range of semiconductor diodes.
To develop comprehensive knowledge and skill on special diodes and devices.
To develop the abilities to construct different rectifier circuits.
To provide understanding of the basic concept and principle of transistor and to identify physically a range of
transistor.
To provide understanding and skill on the basic concept of logic gates.
SHORT DESCRIPTION:
Electronic components; measuring and test equipment; color code and soldering; semiconductor; P-N junction
diode; special diodes and devices; power supply; transistor; transistor amplifier; logic gates.
21 hours 50 minutes
69 steps
Multimedia Application (69475)
Shuva Sarker
Jr. Instructor
Telecommunication Department
Daffodil Polytechnic Institute
Jr. Instructor
Telecommunication Department
Daffodil Polytechnic Institute
2 hours 7 minutes
22 steps
Construction Process-2(66451)
Course Conducted by
Md.Josim Uddin.
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester Civil)
AIMS
After completion of the course the students will be able to:
Understand the construction process of arch and lintel.
Understand the construction process of different types of floor.
Understand the construction process of stairs.
Understand the construction process of different types of roof.
Understand the different finishing works in building.
Understand the construction process of doors and windows.
Understand the different operation and maintenance construction equipment.
Understand the construction of bridge, culvert, canals etc.
SHORT DESCRIPTION
Arches; Lintels; Ground floors; Upper floors; Damp proofing; Termite treatment; Stairs; Roof; Pitched
roof; Plastering and pointing; Doors; Windows; Carpentry and joinery; Scaffolding; Form works, Pointing
& Varnishing, construction equipment, Building Services, Insulation, bridge/culverts and canals etc.
Md.Josim Uddin.
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester Civil)
AIMS
After completion of the course the students will be able to:
Understand the construction process of arch and lintel.
Understand the construction process of different types of floor.
Understand the construction process of stairs.
Understand the construction process of different types of roof.
Understand the different finishing works in building.
Understand the construction process of doors and windows.
Understand the different operation and maintenance construction equipment.
Understand the construction of bridge, culvert, canals etc.
SHORT DESCRIPTION
Arches; Lintels; Ground floors; Upper floors; Damp proofing; Termite treatment; Stairs; Roof; Pitched
roof; Plastering and pointing; Doors; Windows; Carpentry and joinery; Scaffolding; Form works, Pointing
& Varnishing, construction equipment, Building Services, Insulation, bridge/culverts and canals etc.
2 hours 15 minutes
6 steps
Surveying-3 (66452)
Course Conducted by
Md. Zahidul Islam
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)
AIMS
To be able to set out different types of curve.
To be able to conduct sounding.
To be able to learn using total station,
To be able to perform city survey.
SHORT DESCRIPTION
Curve ranging; Setting out Plan/alignment; Hydrographic survey; Total station; City survey.
Md. Zahidul Islam
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)
AIMS
To be able to set out different types of curve.
To be able to conduct sounding.
To be able to learn using total station,
To be able to perform city survey.
SHORT DESCRIPTION
Curve ranging; Setting out Plan/alignment; Hydrographic survey; Total station; City survey.
1 hour
9 steps
Water Supply Engineering (66453)
Course Conducted by
Uchingla Marma
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)
AIMS
To enable to select suitable methods for collection and distribution of water from given source to
given community.
To enable to identify impurities of water of given sources and selected suitable method/methods of
purification up to potable standard.
To assist in comparing various types of water pipes and pipe fittings.
To develop understanding of the procedure of construction, repair, replacement and maintenance
of water supply systems.
To provide understanding of the socio-economic aspect of water supply and sanitation (WSS).
SHORT DESCRIPTION
Introduction; Water requirements; Sources of water; Water pipes; Collection and transmission of water;
Quality of water; Treatment of water (clarification); Treatment of water (filtration); Treatment of water
(disinfection and softening); Miscellaneous water treatment; Water distribution; Water reservoir;
Distribution system; Rural water supply system; Plumbing system.
Uchingla Marma
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)
AIMS
To enable to select suitable methods for collection and distribution of water from given source to
given community.
To enable to identify impurities of water of given sources and selected suitable method/methods of
purification up to potable standard.
To assist in comparing various types of water pipes and pipe fittings.
To develop understanding of the procedure of construction, repair, replacement and maintenance
of water supply systems.
To provide understanding of the socio-economic aspect of water supply and sanitation (WSS).
SHORT DESCRIPTION
Introduction; Water requirements; Sources of water; Water pipes; Collection and transmission of water;
Quality of water; Treatment of water (clarification); Treatment of water (filtration); Treatment of water
(disinfection and softening); Miscellaneous water treatment; Water distribution; Water reservoir;
Distribution system; Rural water supply system; Plumbing system.
3 hours 26 minutes
16 steps
Theory of Structure [66454]
Subject Teacher : Md. Zahidul Isam, Jr. Instructor
Subject Name : Theory of Structure
Subject Code : 66454
Technology : Architecture
Semester :6th
AIMS
• To be able to consolidate and extend the fundamental understanding of the behavior of statically
determinate structures i.e. beams, frames etc.
• To be able to develop of awareness of structural behavior such as deflection and stability of
masonry dam.
• To be able to develop understanding for selection of suitable section of beam and member of the
truss.
SHORT DESCRIPTION
Shear force and bending moment of beams; Stresses in beams; Deflection of beams; Joints and
connections; Forces in frames; Steel structure; Masonry dam; Column; Moving loads; Thin Cylindrical
shells.
Subject Name : Theory of Structure
Subject Code : 66454
Technology : Architecture
Semester :6th
AIMS
• To be able to consolidate and extend the fundamental understanding of the behavior of statically
determinate structures i.e. beams, frames etc.
• To be able to develop of awareness of structural behavior such as deflection and stability of
masonry dam.
• To be able to develop understanding for selection of suitable section of beam and member of the
truss.
SHORT DESCRIPTION
Shear force and bending moment of beams; Stresses in beams; Deflection of beams; Joints and
connections; Forces in frames; Steel structure; Masonry dam; Column; Moving loads; Thin Cylindrical
shells.
7 hours 29 minutes
16 steps
Textile Design & Color - 1973
Course Created By
Md. Ashikur Rahman
Instructor, Textile & GDPM
Daffodil Polytechnic Institute
AIMS :
1. To familiarize the students with the drawing instrument and their uses.
2. To develop the skill of the student in making designs.
3. To give the students a clear concept about light and color.
4. To familiarize with color and weave effects.
5. The students able to develop knowledge, skill and attitude in the area of Textile design and color.
SHORT DESCRIPTION
Basic concept of drawing instruments and their uses; Designing; Motif and repeat of a design; Construction of design from incomplete repeats; Light and color phenomena; Theory of color; Color harmony and contrast of color; Color and weave effect; Check-stripe and shaded design.
Md. Ashikur Rahman
Instructor, Textile & GDPM
Daffodil Polytechnic Institute
AIMS :
1. To familiarize the students with the drawing instrument and their uses.
2. To develop the skill of the student in making designs.
3. To give the students a clear concept about light and color.
4. To familiarize with color and weave effects.
5. The students able to develop knowledge, skill and attitude in the area of Textile design and color.
SHORT DESCRIPTION
Basic concept of drawing instruments and their uses; Designing; Motif and repeat of a design; Construction of design from incomplete repeats; Light and color phenomena; Theory of color; Color harmony and contrast of color; Color and weave effect; Check-stripe and shaded design.
1 hour 42 minutes
18 steps
Telecom workshop and outside plant (29431)
This created by
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
5 hours 44 minutes
28 steps
Mobile Communication Networks (68451)
Mobile Communication Networks
This created by
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
Concept of mobile communication and network; Cellular concept and its initial implementations; Digital
cellular mobile systems; Cordless communications systems (CT2, DECT, PACS and PHS); Mobile data
communication systems; Third generation mobile communication system; telecommunication
management network (TMN) and signaling system; concept of TDMA cellular mobile communication;
concept of CDMA cellular mobile communication; Global mobile satellite systems; Numbers and
identities for mobile communication services; performance benchmarks for mobile; Traffic engineering
and tracking system.
This created by
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
Concept of mobile communication and network; Cellular concept and its initial implementations; Digital
cellular mobile systems; Cordless communications systems (CT2, DECT, PACS and PHS); Mobile data
communication systems; Third generation mobile communication system; telecommunication
management network (TMN) and signaling system; concept of TDMA cellular mobile communication;
concept of CDMA cellular mobile communication; Global mobile satellite systems; Numbers and
identities for mobile communication services; performance benchmarks for mobile; Traffic engineering
and tracking system.
1 day 1 hour 20 minutes
32 steps
Foundation Engineering (26451)
AIMS
To be able to understand the foundation and foundation engineering.
To be able to understand the soil stabilization.
To be able to understand and the bearing capacity of soil.
To be able to understand the factors determining types of foundation.
To be able to understand the foundation on sand and non-plastic soil, plastic soil, non-uniform soil,
rock.
To be able to understand the excavating and bracing.
To be able to understand the sheet pile wall, cofferdam and bulk head.
To be able to understand the damages due to construction operations.
SHORT DESCRIPTION
Foundation and foundation engineering; Factors determining the types of foundation; Soil stabilization;
Bearing capacity of soil; Foundation on sand and non-plastic silt; Foundation on clay and plastic silt;
Foundation on non-uniform soil; Foundation on rock; Excavation and bracing; Sheet pile, cofferdam &
bulkhead; Damages due to construction operations.
To be able to understand the foundation and foundation engineering.
To be able to understand the soil stabilization.
To be able to understand and the bearing capacity of soil.
To be able to understand the factors determining types of foundation.
To be able to understand the foundation on sand and non-plastic soil, plastic soil, non-uniform soil,
rock.
To be able to understand the excavating and bracing.
To be able to understand the sheet pile wall, cofferdam and bulk head.
To be able to understand the damages due to construction operations.
SHORT DESCRIPTION
Foundation and foundation engineering; Factors determining the types of foundation; Soil stabilization;
Bearing capacity of soil; Foundation on sand and non-plastic silt; Foundation on clay and plastic silt;
Foundation on non-uniform soil; Foundation on rock; Excavation and bracing; Sheet pile, cofferdam &
bulkhead; Damages due to construction operations.
27 minutes
15 steps
Radio & TV Engineering (29441)
(69441)Television Transmission And Reception
Created by
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
SHORT DESCRIPTION
Television system, Working principles of TV cameras, picture tube, transmitters and receivers,
Television signal, Television Signal Generation, Transmission and Propagation, Modern Television –
Transmission and Reception, Advanced Television systems and digital studio equipments, Cable
Television, teletext broadcast services, Satellite home receiving system and its networking, Video
recording & play back (VHS, Bmax, U-matic , video 2000, DV and HDV), Storage system, Television
studio and Automation and Features of remote control
Created by
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
SHORT DESCRIPTION
Television system, Working principles of TV cameras, picture tube, transmitters and receivers,
Television signal, Television Signal Generation, Transmission and Propagation, Modern Television –
Transmission and Reception, Advanced Television systems and digital studio equipments, Cable
Television, teletext broadcast services, Satellite home receiving system and its networking, Video
recording & play back (VHS, Bmax, U-matic , video 2000, DV and HDV), Storage system, Television
studio and Automation and Features of remote control
8 hours 49 minutes
50 steps
Networks, Filters & Transmission Lines (66841)
(66841)Networks, Filters & Transmission Lines
Created by
Shuva Sarker
Junior Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
SHORT DESCRIPTION
Network theorems, Four terminal networks; Half section network; Attenuators and filters; Transmission line; Line
constant & impedance matching; Antenna; Propagation of radio wave; Effect of earth curvature & ionosphere on
wave propagation.
Created by
Shuva Sarker
Junior Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
SHORT DESCRIPTION
Network theorems, Four terminal networks; Half section network; Attenuators and filters; Transmission line; Line
constant & impedance matching; Antenna; Propagation of radio wave; Effect of earth curvature & ionosphere on
wave propagation.
7 hours 35 minutes
17 steps
Basics of Telecommunication (29411)
Course Conducted By
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 1st Semester)
Objectives of the Course
After completion of the course students will be able to:
Basic Telephony (1G, 2G, 3G, 4G,LTE And UMTS)
o Wireless and Cellular/Mobile Radio
o Wi-MAX, Wi-Fi, VOIP, PCS
o Local and Long-Distance Communications
o Image Communications
o Transmission Media , Media Gateway Control Protocol
o Telephone switching
o Voice over Internet Protocol (VoIP) and VoIP Gateway
o Telephony and Telegraph system, (NWD, ISD and PSTN)
o Telecommunication standardization organization
o OSI Model
o Bangladesh Telecommunication Regulatory Commission , function , Acts, mission and vision of BTRC
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 1st Semester)
Objectives of the Course
After completion of the course students will be able to:
Basic Telephony (1G, 2G, 3G, 4G,LTE And UMTS)
o Wireless and Cellular/Mobile Radio
o Wi-MAX, Wi-Fi, VOIP, PCS
o Local and Long-Distance Communications
o Image Communications
o Transmission Media , Media Gateway Control Protocol
o Telephone switching
o Voice over Internet Protocol (VoIP) and VoIP Gateway
o Telephony and Telegraph system, (NWD, ISD and PSTN)
o Telecommunication standardization organization
o OSI Model
o Bangladesh Telecommunication Regulatory Commission , function , Acts, mission and vision of BTRC
6 hours 13 minutes
30 steps
Digital Electronics-1 (26831)
Course Conducted By
MD. Badeuzzamal Sarker
Instructor
Electrical Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (CMT 4th Semester)
Objectives of the Course
After completion of the course students will be able to:
You will get concept of digital electronics; Logic gates, Boolean algebra and logic simplification &Combinational logic circuits.
MD. Badeuzzamal Sarker
Instructor
Electrical Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (CMT 4th Semester)
Objectives of the Course
After completion of the course students will be able to:
You will get concept of digital electronics; Logic gates, Boolean algebra and logic simplification &Combinational logic circuits.
20 hours 43 minutes
33 steps
Wireless Communication & Networking
Course Conducted By
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 6th Semester)
Objectives of the Course
After completion of the course students will be able to:
Introduction to Wireless communication, Modern wireless communication system, third generation(3G) wireless
network, fourth generation(4G) wireless network, cellular network, Amplitude Modulation(AM), Frequency
Modulation(FM), Linear Modulation technique, Constant envelope modulation technique, equalization, diversity
and channel coding, polarization diversity, frequency diversity, time diversity, different types of multiple access,
packet radio protocols, several types of wireless network, wireless system standard and 4th Industrial Revolutions.
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 6th Semester)
Objectives of the Course
After completion of the course students will be able to:
Introduction to Wireless communication, Modern wireless communication system, third generation(3G) wireless
network, fourth generation(4G) wireless network, cellular network, Amplitude Modulation(AM), Frequency
Modulation(FM), Linear Modulation technique, Constant envelope modulation technique, equalization, diversity
and channel coding, polarization diversity, frequency diversity, time diversity, different types of multiple access,
packet radio protocols, several types of wireless network, wireless system standard and 4th Industrial Revolutions.
7 hours 6 minutes
40 steps
Microwave and Antennas
Course Conducted By
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 6th Semester)
Objectives of the Course
After completion of the course students will be able to:
Concept of Microwave, Microwave components; Wave guide; Microwave tubes; Microwave
measurements; Semiconductor microwave devices; Propagation models: Microwave antenna.
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 6th Semester)
Objectives of the Course
After completion of the course students will be able to:
Concept of Microwave, Microwave components; Wave guide; Microwave tubes; Microwave
measurements; Semiconductor microwave devices; Propagation models: Microwave antenna.
12 hours 30 minutes
37 steps
General Textile Processing-I (21111)
CONDUCTED BY:
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute
After undergoing the subject, students will be able to:
Identify machineries of cotton and jute yarn manufacturing.
Identify process sequence for cotton and jute fibers.
Identify grading, batch, batching, emulsion preparation and softening for jute yarn manufacturing.
Determine winding packages.
Identify warp beams.
Demonstrate power looms.
Identify maintenance tools and their uses.
Observe machine gears
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute
After undergoing the subject, students will be able to:
Identify machineries of cotton and jute yarn manufacturing.
Identify process sequence for cotton and jute fibers.
Identify grading, batch, batching, emulsion preparation and softening for jute yarn manufacturing.
Determine winding packages.
Identify warp beams.
Demonstrate power looms.
Identify maintenance tools and their uses.
Observe machine gears
3 steps
Textile Testing & Quality Control- 1 (1944)
CONDUCTED BY:
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute
Subject Aims:
Basic aspects of textile testing, humidity, moisture in textiles, sampling, identification of textile fibers, fiber length & its measurement, fiber strength & its measurement, Trash, naps & their measurement, fiber fineness &its measurement, micromere value, fiber maturity
Subject Outcome:
Students will be understood with an opportunity to acquire knowledge & skill about Testing,
Techniques & System of Testing. Operating system of different modern Testing instruments,
Interpretation & Analysis of testing data uses & Maintenance of testing instruments.
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute
Subject Aims:
Basic aspects of textile testing, humidity, moisture in textiles, sampling, identification of textile fibers, fiber length & its measurement, fiber strength & its measurement, Trash, naps & their measurement, fiber fineness &its measurement, micromere value, fiber maturity
Subject Outcome:
Students will be understood with an opportunity to acquire knowledge & skill about Testing,
Techniques & System of Testing. Operating system of different modern Testing instruments,
Interpretation & Analysis of testing data uses & Maintenance of testing instruments.
4 steps
General Textile Process - II (21121)
Students need to gather basic knowledge and skill on overall processes for wet processing, garments manufacturing, fashion design and merchandising before in depth study on specific subject matter as well as specialization. Fundamental knowledge and skills are the prerequisite to study specialized subjects. This course outlines the overview of wet processing and apparel manufacturing as well as introduces the basic knowledge of fashion design and merchandising.
This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
3 hours 53 minutes
17 steps
Apparel Manufacturing-I (21441)
The textile industry plays a very significant role in the GDP of Bangladesh. For the smooth running of this sector diploma textile engineers are required in the mid-level who are playing key roles in this sector. To prepare an appropriate diploma graduate should have sufficient knowledge in Apparel Manufacturing-I. To attain this objective, we have added this course to the diploma level which consists of apparel manufacturing process containing pattern making, pattern grading, marker making, CAD & CAM, fabric inspection, fabric relaxation, fabric spreading, and fabric cutting process. By acquiring that knowledge, skills and attitude students will be able to gather apparel manufacturing technology as well as able to study in further courses.
This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
5 hours 8 minutes
20 steps
Clothing-II (1962)
The textile industry specially RMG sector plays a very significant role in the GDP of Bangladesh. For the smooth running of this sector diploma textile engineers are required in the mid-level who are playing key roles in this sector. To prepare an appropriate diploma graduate should have sufficient knowledge in Clothing-II. To attain this objective, we have added this course to the diploma level which consists Cloth making process containing pattern making, pattern grading, marker making, CAD & CAM, fabric inspection, fabric relaxation, fabric spreading, and fabric cutting process. By acquiring that knowledge, skills and attitude students will be able to gather clothing technology as well as able to study in further courses.
This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
45 minutes
3 steps
Garments manufacturing –III
The Ready-Made Garment sector plays a very significant role in the GDP of Bangladesh. For the smooth running of this sector diploma textile engineers are required in the mid-level who are playing key roles in this sector. To prepare an appropriate diploma graduate should have sufficient knowledge in Garment Manufacturing-III. To attain this objective, we have added this course to the diploma level which consists of garment manufacturing process containing pattern making, pattern grading, marker making, CAD & CAM, fabric inspection, fabric relaxation, fabric spreading, and fabric cutting process. By acquiring that knowledge, skills and attitude students will be able to gather garment manufacturing technology as well as able to study in further courses.
This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
25 minutes
2 steps
CAD & CAM-I (5062)
Many textile and fashion designers modernly use specialized forms of technology such as computer-aided design (CAD) and computer-aided manufacture (CAM) to speed up the production process, reduce waste, and reduce labor costs overall. Textile manufacturers use CAM to make printed textiles and whole garments. The CAD information is sent to the CAM, which controls and manages the manufacturing process. Often CAM systems involve the use of CNC, or computer-numerical control machines, that control processes like cutting and joining garment segments. This subject objective is to know about CAD & CAM.
This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.
2 hours 40 minutes
8 steps
IT Support and IoT Basics (29441)
Course Conducted By
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 4th Semester)
Objectives of the Course
After completion of the course students will be able to:
This is a sector specific course of diploma in engineering program required for enabling the
graduates to use and work with ICT. It includes Concept of digital electronics, Number system
and binary arithmetic operation, Arithmetic codes and code conversion, Concept of logic gates,
Electronic circuit of logic gates, Digital ic’s Logic families, Logic simplification & circuit design,
Combinational logic circuits, Encoder and decoder, Multiplexers and DE-Multiplexer, Sequential
logic circuits. This course designed emphasis will be more on teaching practical aspect rather
than theory.
Shuva Sarker
Jr. Instructor
Telecommunication Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (TCT 4th Semester)
Objectives of the Course
After completion of the course students will be able to:
This is a sector specific course of diploma in engineering program required for enabling the
graduates to use and work with ICT. It includes Concept of digital electronics, Number system
and binary arithmetic operation, Arithmetic codes and code conversion, Concept of logic gates,
Electronic circuit of logic gates, Digital ic’s Logic families, Logic simplification & circuit design,
Combinational logic circuits, Encoder and decoder, Multiplexers and DE-Multiplexer, Sequential
logic circuits. This course designed emphasis will be more on teaching practical aspect rather
than theory.
13 hours 31 minutes
53 steps
Textile Testing & Quality Control- 1 (21151)
CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
8 hours 12 minutes
26 steps
Garments CAD & CAM-II
CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
1 hour 44 minutes
9 steps