All Courses

Protective clothing; Production of specialized garments; Microbial protections; Medical Textiles; Water repellent clothing; Proofing of garments; Water proofing; Fire proofing; Mildew Proofing; Moth Proofing

CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute

CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute

CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute

CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute

CONDUCTED BY:
Md.Ashikur Rahman
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.

SHORT DESCRIPTION:

Shed; Shedding mechanism; Tappet; Top roller mounting; Picking; Beating up; Take up motion, Let off motion & basic idea of knitting

CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute

INTENTION OF THIS COURSE:
• Our student will develop understanding and skill on operating different sewing machine. sewing of garments by using different types of sewing machine
• Our student can operating different sewing machine.
• Our student can get knowledge of different work aid of sewing machine.
• Our student can get knowledge of Interlining.
• Our student can get knowledge of Garments Finishing.
• Our student can get knowledge of care level code.

After completing the Course student will have knowledge about different sewing machine, sewing of garments by using different types of sewing machine, knowledge of different work aid of sewing machine, Interlining, Garments finishing & Garments care level code.

AIMS
 To be able to select suitable reinforcement and section required for reinforced cement concrete
solid floor / roof slab.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
column.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
stair slab.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
footing for brick wall and reinforced cement concrete wall.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
column footing.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
cantilever retaining wall.
 To be able to supervise the placement of reinforcement for all types of reinforced cement
concrete works..
 To be able to acquire preliminary knowledge about pre-stressed concrete.

Subject Teacher : Md. Zahidul Isam, Jr. Instructor
Subject Name : Theory of Structure
Subject Code : 66454
Technology : Architecture
Semester :6th

AIMS
• To be able to consolidate and extend the fundamental understanding of the behavior of statically
determinate structures i.e. beams, frames etc.
• To be able to develop of awareness of structural behavior such as deflection and stability of
masonry dam.
• To be able to develop understanding for selection of suitable section of beam and member of the
truss.
SHORT DESCRIPTION
Shear force and bending moment of beams; Stresses in beams; Deflection of beams; Joints and
connections; Forces in frames; Steel structure; Masonry dam; Column; Moving loads; Thin Cylindrical
shells.

Diploma in Engineering holders have to use land survey for implement project. So, provide the student with the opportunity to acquire knowledge and skill to: Work with chain, plane table and Compass survey, Cadastral survey, record surveyed data and plotting map. Locate unknown points. Create the area using instruments, Calculate the area using different Methods.

CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute

To develop basic knowledge of calculation about cotton spinning such as-

a) Blow room
b) Carding
c) Draw frame
d) Simplex
e) Ring frame.

To develop basic knowledge of calculation about different yarn numbering system & moisture relative of textiles.


SHORT DESCRIPTION:

Blow room calculation; Carding calculation; Drawing calculation; Simplex calculation; Ring frame calculation & calculation of yarn numbering.

CONDUCTED BY:
MD.ASFAKUR RAHMAN
Instructor & Assessor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.

AIMS

To provide the students with an opportunity to develop knowledge, skill and attitude in the area of sewing practice with special emphasis on:
sewing needles and machines
stitch and seam
feed mechanism of sewing.

SHORT DESCRIPTION

Sewing needles; Sewing machines; Stitch; Seam and Feed mechanism of sewing.

Subject Teacher : Md. Zahidul Islam, Jr. Instructor
Subject Name : Transportation Engineering-1
Subject Code : 66462
Technology : Civil
Semester : 6th

Subject Aims:

• To be able to understand the standard types of construction used in Bangladesh for road & pavement, bridge
& culvert to assess the advantages and disadvantages of each type.
• To be able to understand the procedure, methods & techniques used in Construction of road & pavement,
Drainage system, bridges & culverts, Embankment & cuttings.
• To be able to understand the importance of traffic control system.
• To be able to understand the maintenance, servicing & repair procedure, methods & techniques used to keep the highway operational.
• To be able to acquaint with the different aspects of airport construction.
Subject Outcome:
Modes of transportation and history of road development; Highway planning; Road Alignment and survey; Highway geometrics; Sub-grade soil; Highway materials, Construction of road formation & classification of road; Low cost road; Water bound macadam road; Bituminous road; Cement concrete road; Hill road; Highway drainage; Traffic control; Road arboriculture; Highway machinery; Highway failures & maintenance; Highway bridges & culverts; Planning of airport; Geometric standard in airport, airport building & warehouses.

CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute

Conduct By
Sabina Yasmin
Instructor
Department of Textile & GDPM
Daffodil Polytechnic Institute

Conducted By:
Sabina Yasmin koli
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute


After undergoing the subject, students will be able to:
Explain Man-Made Fibre manufacturing process.
Explain Regenerated Cellulosic Fiber manufacturing process.
Identify problem during production.
Provide effective solution during production.
Explain High-performance Man-Made Fibre.
Illustrate recycling process and sustainability of Man-Made Fibre

Conducted By:
Sabina Yasmin koli
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute