All Courses
Architectural Design and Drawing - 1 (68712)
Subject Aims:
• Develop the ability to use various drawing instruments and equipment.
• Enable Design and Drawing Media
• Enable the elements of drawing
• Enable in constructing and using various types of scales in drawing.
• Provide the ability to construct various geometrical figures.
• Enable to adopt various symbols used in drawing.
• Provide the skill of freehand sketching with shades and shadows.
• Provide the basic skills of drawing orthographic views.
Subject Outcome:
• Students will learn about Architectural Design and Drawing Equipment.
• Students will learn about Design and Drawing Media.
• Students will learn about Element of Design, concept of View, reproduction, Lettering, numbering and constructing.
• Students will adopting alphabet of lines and Dimensioning.
• Students will learn about Constructing scales, constructing geometrical figures and constructing conic sections.
• Students will adopting Symbols, Freehand sketching (with shades and shadows).
• Develop the ability to use various drawing instruments and equipment.
• Enable Design and Drawing Media
• Enable the elements of drawing
• Enable in constructing and using various types of scales in drawing.
• Provide the ability to construct various geometrical figures.
• Enable to adopt various symbols used in drawing.
• Provide the skill of freehand sketching with shades and shadows.
• Provide the basic skills of drawing orthographic views.
Subject Outcome:
• Students will learn about Architectural Design and Drawing Equipment.
• Students will learn about Design and Drawing Media.
• Students will learn about Element of Design, concept of View, reproduction, Lettering, numbering and constructing.
• Students will adopting alphabet of lines and Dimensioning.
• Students will learn about Constructing scales, constructing geometrical figures and constructing conic sections.
• Students will adopting Symbols, Freehand sketching (with shades and shadows).
1 day 3 hours 44 minutes
57 steps
Architecture Rendering & Animation - 2 (68772)
Subject Aims:
• Develop knowledge, skill and attitude in the field of Computer Rendering & Animation (3D Max and V-ray) with special emphasis on - 3D modeling.
• Develop knowledge and skill on Materials and mapping.
• Develop knowledge and skill on light, camera and render.
• Develop knowledge and skill V-Ray; and animation.
Subject Outcome:
• Students will learn about 3D Modeling & Animation Software.
• Students will learn about 3D Modeling, Tool Panels & It’s Sub Tools.
• Students will learn about Modeling with primitives and 3D Max main tool bar.
• Students will learn about Modeling with Spline, Compound Object and Modifier Stack.
• Students will learn about Setting and Preferences menu, Massing of Building Project.
• Students will learn about Doors, Windows, AEC Extended and Stair, Finishing of Massing, Materials Basics, Texture Mapping. Lighting Basic, Camera Basic, Rendering Basic.
• Students will learn about V-Ray, Render, V-ray Materials and Lights, Animation Basic, Key frame Animation, Work Throw Animation.
• Develop knowledge, skill and attitude in the field of Computer Rendering & Animation (3D Max and V-ray) with special emphasis on - 3D modeling.
• Develop knowledge and skill on Materials and mapping.
• Develop knowledge and skill on light, camera and render.
• Develop knowledge and skill V-Ray; and animation.
Subject Outcome:
• Students will learn about 3D Modeling & Animation Software.
• Students will learn about 3D Modeling, Tool Panels & It’s Sub Tools.
• Students will learn about Modeling with primitives and 3D Max main tool bar.
• Students will learn about Modeling with Spline, Compound Object and Modifier Stack.
• Students will learn about Setting and Preferences menu, Massing of Building Project.
• Students will learn about Doors, Windows, AEC Extended and Stair, Finishing of Massing, Materials Basics, Texture Mapping. Lighting Basic, Camera Basic, Rendering Basic.
• Students will learn about V-Ray, Render, V-ray Materials and Lights, Animation Basic, Key frame Animation, Work Throw Animation.
18 hours 56 minutes
43 steps
Architectural Design and Drawing - 2 (68721)
Subject Aims:
• Providing students more advance knowledge about the Architectural design and drawing as they completed Architectural Design and Drawing - 1.
• It is necessary to acquire accurate knowledge about the Architectural design and drawing to be a successful professional of Architecture.
Subject Outcome:
• Students can use Anthropometric data in design and planning.
• Students’ concept of design process will be clear.
• Students will be aware about design factors and principle of design.
• Students are able to identify the difference between house & housing.
• Students can identify the areas of a residence.
• Students will know about different types of door & window.
• Students can Plan staircase.
• Providing students more advance knowledge about the Architectural design and drawing as they completed Architectural Design and Drawing - 1.
• It is necessary to acquire accurate knowledge about the Architectural design and drawing to be a successful professional of Architecture.
Subject Outcome:
• Students can use Anthropometric data in design and planning.
• Students’ concept of design process will be clear.
• Students will be aware about design factors and principle of design.
• Students are able to identify the difference between house & housing.
• Students can identify the areas of a residence.
• Students will know about different types of door & window.
• Students can Plan staircase.
4 hours 50 minutes
15 steps
History of Architecture - 1 (26142)
Course Conducted By
Md. Asaduzzaman Russel
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 4th Semester)
Objectives of the Course
• To understand the Architectural characteristics of Egyptian Civilization.
• To understand the Architectural characteristics of West Asiatic Civilization.
• To understand the Architectural characteristics of Hellenic period of Greek Architecture.
• To understand the Architectural characteristics of Roman Civilization.
• Develop the knowledge of beginning of Islamic architecture during the Mughal period.
• To know the development of Islamic & indo Islamic architecture in East Bengal.
• To understand Architecture & the decorative arts of the 20th century.
• Know Architects Bio and their works. Modern Architects in Bangladesh and their works.
Short Description
Style of decorative arts; Egyptian Civilization Architecture; West Asiatic Architecture; History of Hellenic period of Greek Architecture; Architectural features of Roman Civilization; Development of Islamic architecture during Mughal period and Architecture in East Bengal.
Md. Asaduzzaman Russel
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 4th Semester)
Objectives of the Course
• To understand the Architectural characteristics of Egyptian Civilization.
• To understand the Architectural characteristics of West Asiatic Civilization.
• To understand the Architectural characteristics of Hellenic period of Greek Architecture.
• To understand the Architectural characteristics of Roman Civilization.
• Develop the knowledge of beginning of Islamic architecture during the Mughal period.
• To know the development of Islamic & indo Islamic architecture in East Bengal.
• To understand Architecture & the decorative arts of the 20th century.
• Know Architects Bio and their works. Modern Architects in Bangladesh and their works.
Short Description
Style of decorative arts; Egyptian Civilization Architecture; West Asiatic Architecture; History of Hellenic period of Greek Architecture; Architectural features of Roman Civilization; Development of Islamic architecture during Mughal period and Architecture in East Bengal.
1 day 23 hours 30 minutes
92 steps
Interior Design - 3 (68751)
Subject Aims:
• Understand the planning of a shopping center.
• Understand the retail and self-service shop.
• Prepare a presentation drawing of a shopping center.
• Understand the planning of a health service.
• Prepare design of a health service.
Subject Outcome:
• Planning of shopping center and basic area of shopping center.
• Retail and self-service Shops, service detail of shopping center and shopping center signage.
• Interior component of retail shop and self-service shop.
• General conception of Hospitals; patient Rooms; Admitting Department of Hospital.
• Understand the planning of a shopping center.
• Understand the retail and self-service shop.
• Prepare a presentation drawing of a shopping center.
• Understand the planning of a health service.
• Prepare design of a health service.
Subject Outcome:
• Planning of shopping center and basic area of shopping center.
• Retail and self-service Shops, service detail of shopping center and shopping center signage.
• Interior component of retail shop and self-service shop.
• General conception of Hospitals; patient Rooms; Admitting Department of Hospital.
21 hours 40 minutes
48 steps
Interior Design - 4 (68761)
Subject Aims:
• Students can design of an office building.
• Students can design the interior of an office building.
• Students can design the arrangement of furniture in an office building.
Subject Outcome:
• Students will understand the planning aspects.
• Students will know the design criteria.
• Students will learn about FAR and Space allowance.
• Students can plan the Office arrangements.
• Students can design Conference room.
• Students can design Ceiling and floor.
• Students will be aware of RAJUK rules.
• Students can design of an office building.
• Students can design the interior of an office building.
• Students can design the arrangement of furniture in an office building.
Subject Outcome:
• Students will understand the planning aspects.
• Students will know the design criteria.
• Students will learn about FAR and Space allowance.
• Students can plan the Office arrangements.
• Students can design Conference room.
• Students can design Ceiling and floor.
• Students will be aware of RAJUK rules.
15 hours 30 minutes
32 steps
68731 Interior Design-1
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 3rd Semester)
Objectives of the Course
After completion of the course students will be able to:
❖ Acquire knowledge and skill with understanding basic terminology used by architects and interior designers.
❖ Understand design process of a residence.
❖ Understand color of a residence.
❖ Understand Texture of a residence.
❖ Understand materials of a residence.
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 3rd Semester)
Objectives of the Course
After completion of the course students will be able to:
❖ Acquire knowledge and skill with understanding basic terminology used by architects and interior designers.
❖ Understand design process of a residence.
❖ Understand color of a residence.
❖ Understand Texture of a residence.
❖ Understand materials of a residence.
8 hours 8 minutes
74 steps
Interior Construction-2 (68753)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 5th Semester)
Objectives of the Course
After completion of the course students will be able to:
❖ Understand the interior construction procedure.
❖ Learning about the construction procedure of living room.
❖ Can See the construction procedure of false ceiling.
❖ Learn how to prepare materials schedule, cost and development process.
❖ Understand To prepare construction documents of interior wall paneling.
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 5th Semester)
Objectives of the Course
After completion of the course students will be able to:
❖ Understand the interior construction procedure.
❖ Learning about the construction procedure of living room.
❖ Can See the construction procedure of false ceiling.
❖ Learn how to prepare materials schedule, cost and development process.
❖ Understand To prepare construction documents of interior wall paneling.
3 hours 8 minutes
36 steps
Digital Presentation & Visual Technique (68754)
Course Conducted By
Shanta Islam
Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 5th Semester)
Objectives of the Course
After completion of the course students will be able to:
❖ Understand the Graphic Design.
❖ Knowing about Design software.
❖ Understand the Editing software.
❖ Learn the Commercial printing output.
Shanta Islam
Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 5th Semester)
Objectives of the Course
After completion of the course students will be able to:
❖ Understand the Graphic Design.
❖ Knowing about Design software.
❖ Understand the Editing software.
❖ Learn the Commercial printing output.
5 hours 52 minutes
35 steps
Furniture Design & Drawing (68773)
Course Conducted By
Nishat Akter Munia
Jr. Instructor
Architecture Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 7th semester)
SHORT DESCRIPTION:
Historic furniture for interior design; Furniture style; Furniture & cabinets; Design & development of
furniture; Process of design work; Rending of furniture; molding, fasteners and gluing, clamping &
fasteners; plywood; contemporary materials Glass, Cane, Steel, Fiber Glass, Plastic Materials, brain-machine furniture, responsibility and privacy.
Nishat Akter Munia
Jr. Instructor
Architecture Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 7th semester)
SHORT DESCRIPTION:
Historic furniture for interior design; Furniture style; Furniture & cabinets; Design & development of
furniture; Process of design work; Rending of furniture; molding, fasteners and gluing, clamping &
fasteners; plywood; contemporary materials Glass, Cane, Steel, Fiber Glass, Plastic Materials, brain-machine furniture, responsibility and privacy.
3 hours 36 minutes
35 steps
Interior Project(68771)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 3rd Semester)
Objectives of the Course
After completion of the course students will be able to:
❖ Understand the Individual space interior
❖ Can draw the Related Drawing
❖ Learn about the considering materials
❖ Develop knowledge, skill and attitude of preparing different types of Interior Project.
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 3rd Semester)
Objectives of the Course
After completion of the course students will be able to:
❖ Understand the Individual space interior
❖ Can draw the Related Drawing
❖ Learn about the considering materials
❖ Develop knowledge, skill and attitude of preparing different types of Interior Project.
2 hours 54 minutes
24 steps
Perspective Drawing & Rendering(68744)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for Diploma in Engineering (AIDT 4th Semester)
Objectives of the Course
After completion of the course students will be able to:
System and method of perspective drawing
About One point perspective drawing
About Two point perspective drawing
About Three point perspective drawing
Technique of distortion in perspective drawing
Shades and shadows on perspective drawing
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for Diploma in Engineering (AIDT 4th Semester)
Objectives of the Course
After completion of the course students will be able to:
System and method of perspective drawing
About One point perspective drawing
About Two point perspective drawing
About Three point perspective drawing
Technique of distortion in perspective drawing
Shades and shadows on perspective drawing
10 hours 12 minutes
20 steps
Construction Process-2(26441)
Course Conducted by
Md. Emon Khan.
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester Civil)
AIMS
After completion of the course the students will be able to:
Understand the construction process of arch and lintel.
Understand the construction process of different types of floor.
Understand the construction process of stairs.
Understand the construction process of different types of roof.
Understand the different finishing works in building.
Understand the construction process of doors and windows.
Understand the different operation and maintenance construction equipment.
Understand the construction of bridge, culvert, canals etc.
SHORT DESCRIPTION
Arches; Lintels; Ground floors; Upper floors; Damp proofing; Termite treatment; Stairs; Roof; Pitched
roof; Plastering and pointing; Doors; Windows; Carpentry and joinery; Scaffolding; Form works, Pointing
& Varnishing, construction equipment, Building Services, Insulation, bridge/culverts and canals etc.
Md. Emon Khan.
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester Civil)
AIMS
After completion of the course the students will be able to:
Understand the construction process of arch and lintel.
Understand the construction process of different types of floor.
Understand the construction process of stairs.
Understand the construction process of different types of roof.
Understand the different finishing works in building.
Understand the construction process of doors and windows.
Understand the different operation and maintenance construction equipment.
Understand the construction of bridge, culvert, canals etc.
SHORT DESCRIPTION
Arches; Lintels; Ground floors; Upper floors; Damp proofing; Termite treatment; Stairs; Roof; Pitched
roof; Plastering and pointing; Doors; Windows; Carpentry and joinery; Scaffolding; Form works, Pointing
& Varnishing, construction equipment, Building Services, Insulation, bridge/culverts and canals etc.
1 hour
6 steps
Construction Management & Documentation
Course Conducted by
Md. Zahidul Islam
Jr. Instructor, Civil Technology
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (7th Semester,Civil)
AIMS:
To be able to understand the modern techniques of construction management.
To be able to understand the operational research & site layout and organization.
To be able to understand the mobilization of materials in construction management.
To be able to understand the quality and cost control.
To be able to understand the Pre-tender and Post-tender planning.
To be able to prepare pre-qualification documents.
To be able to evaluate pre-qualification documents.
To be able to prepare technical specifications.
To be able to prepare financial evaluation.
To be able to prepare contract clauses.
To be able to prepare tender documents.
To be able to prepare contract documents.
To be able to prepare Quality control document.
To be able to understand the cost control.
To be able to develop knowledge, skill and attitude of evaluating tenders and preparing
comparative statement.
SHORT DESCRIPTION
Principles of management and construction; Organization of contracts department; Operational
research; Site layout and organization; Mobilization of materials; Demobilization of STRUCTURE; Safety
in construction; Quality and cost control; Codes and building by-laws; Tender; Pre-tender and Posttender planning; Tender document; Tender notice; Instruction to tender; Contract clauses/condition of
contract; Technical specifications of materials and works; Pre-qualification of contractors; Evaluation
and comparative statement; Contract agreement.
Md. Zahidul Islam
Jr. Instructor, Civil Technology
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (7th Semester,Civil)
AIMS:
To be able to understand the modern techniques of construction management.
To be able to understand the operational research & site layout and organization.
To be able to understand the mobilization of materials in construction management.
To be able to understand the quality and cost control.
To be able to understand the Pre-tender and Post-tender planning.
To be able to prepare pre-qualification documents.
To be able to evaluate pre-qualification documents.
To be able to prepare technical specifications.
To be able to prepare financial evaluation.
To be able to prepare contract clauses.
To be able to prepare tender documents.
To be able to prepare contract documents.
To be able to prepare Quality control document.
To be able to understand the cost control.
To be able to develop knowledge, skill and attitude of evaluating tenders and preparing
comparative statement.
SHORT DESCRIPTION
Principles of management and construction; Organization of contracts department; Operational
research; Site layout and organization; Mobilization of materials; Demobilization of STRUCTURE; Safety
in construction; Quality and cost control; Codes and building by-laws; Tender; Pre-tender and Posttender planning; Tender document; Tender notice; Instruction to tender; Contract clauses/condition of
contract; Technical specifications of materials and works; Pre-qualification of contractors; Evaluation
and comparative statement; Contract agreement.
5 minutes
11 steps
Water Resource Engineering (26461)
Course Conducted by
Uchingla Marma Rupu
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (7th Semester,Civil)
AIMS
• To provide understanding on the influence of the climatic condition of Bangladesh on its ground
water and surface water flow
• To provide understanding of recharging of underground water and ascertain its necessity in
Bangladesh.
• To enable to select a suitable source of water and method of irrigation for particular situation.
• To enable to select a suitable method of drainage for particular situation.
• To enable to select a suitable method for control of rivers and flood in Bangladesh.
• To understand rain water harvesting.
SHORT DESCRIPTION
Sources of water; Rainfall and run-off; Lifting of underground water; Storing and Recharging of
ground/rain water; Irrigation and its effect; Well irrigation; Water requirements for crops; and quality
of irrigation water; Storage reservoir; Dam and dyke; Irrigation canals; Silt deposit; Scouring; Canal
works; Drainage; River training works; Flood and flood management and flood control; Irrigation
projects in Bangladesh.
Uchingla Marma Rupu
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (7th Semester,Civil)
AIMS
• To provide understanding on the influence of the climatic condition of Bangladesh on its ground
water and surface water flow
• To provide understanding of recharging of underground water and ascertain its necessity in
Bangladesh.
• To enable to select a suitable source of water and method of irrigation for particular situation.
• To enable to select a suitable method of drainage for particular situation.
• To enable to select a suitable method for control of rivers and flood in Bangladesh.
• To understand rain water harvesting.
SHORT DESCRIPTION
Sources of water; Rainfall and run-off; Lifting of underground water; Storing and Recharging of
ground/rain water; Irrigation and its effect; Well irrigation; Water requirements for crops; and quality
of irrigation water; Storage reservoir; Dam and dyke; Irrigation canals; Silt deposit; Scouring; Canal
works; Drainage; River training works; Flood and flood management and flood control; Irrigation
projects in Bangladesh.
4 hours 50 minutes
21 steps
Architectural Materials and Products(68711)
Subject Teacher - Sharmin Akter
After complete this subject student Able:-
To provide the students with an opportunity to acquire knowledge and skill,
• To be able to recognize the sources of various architectural materials.
• To be able to understand the characteristics of various architectural materials.
• To be able to understand the uses of different architectural products.
SHORT DESCRIPTIONS:
Aspects of architectural materials , use of mud, brick, sand, cement, lime as mortar, timber,
insulating materials, glass, paint & varnishes, acoustics materials and steel as architectural materials.
After complete this subject student Able:-
To provide the students with an opportunity to acquire knowledge and skill,
• To be able to recognize the sources of various architectural materials.
• To be able to understand the characteristics of various architectural materials.
• To be able to understand the uses of different architectural products.
SHORT DESCRIPTIONS:
Aspects of architectural materials , use of mud, brick, sand, cement, lime as mortar, timber,
insulating materials, glass, paint & varnishes, acoustics materials and steel as architectural materials.
6 hours 7 minutes
21 steps
Interior Graphics(68732)
Interior Graphics
Subject Code: 68732
This Course for: Diploma in Architecture and Interior Design Technology (3rd Semester)
Objective of the Course:
• Develop knowledge, skill and attitude in the field of the graphical representation of architectural design & drafting.
• Creativity
• Elements of design.
• Principles of Design
• Proportion and scale
• Composition
• Color
• Rendering and presentation
SHORT DESCRIPTION -
Creativity, creative process and theories, rhythm, emphasis, proportion, appearance, unity, variety, repetition, opposition, transition, form, shape & space, transformation of forms, balance, rule of thirds, scale and Proportion, golden section, composition, color, rendering and presentation.
Subject Code: 68732
This Course for: Diploma in Architecture and Interior Design Technology (3rd Semester)
Objective of the Course:
• Develop knowledge, skill and attitude in the field of the graphical representation of architectural design & drafting.
• Creativity
• Elements of design.
• Principles of Design
• Proportion and scale
• Composition
• Color
• Rendering and presentation
SHORT DESCRIPTION -
Creativity, creative process and theories, rhythm, emphasis, proportion, appearance, unity, variety, repetition, opposition, transition, form, shape & space, transformation of forms, balance, rule of thirds, scale and Proportion, golden section, composition, color, rendering and presentation.
3 hours 14 minutes
17 steps
AIDT Professional Practice (68774)
Course Conducted By
Nishat Akter Munia
Jr. Instructor
Architecture Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 7th semester)
Subject Aims:
• To be able to understand Architectural & Interior design Profession.
• To be able to understand the importance of site visit
• To be able to develop knowledge of architectural and interior design profession.
• To be able to understand the controlling authority in Architectural field
• To be able to understand BNBC.
• To be able to understand the public works accounts.
• To be able to acquire knowledge of the public procurement rules(PPR).
• To be able to prepare tender documents.
• To be able to develop knowledge, skill and attitude of evaluating tenders and preparing comparative statement.
• To be able to understand the Project Estimate and Valuation.
• To be able to Understand the Arbitration.
Subject Outcome:
Architectural & Interior design Profession, professional practice, site visit, practice of Architect profession, set- up of Architectural firm, compensation for architect’s / Designers service, controlling authority and related local authorities, building By-laws & Bangladesh National Building Code, Arbitration.
Nishat Akter Munia
Jr. Instructor
Architecture Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 7th semester)
Subject Aims:
• To be able to understand Architectural & Interior design Profession.
• To be able to understand the importance of site visit
• To be able to develop knowledge of architectural and interior design profession.
• To be able to understand the controlling authority in Architectural field
• To be able to understand BNBC.
• To be able to understand the public works accounts.
• To be able to acquire knowledge of the public procurement rules(PPR).
• To be able to prepare tender documents.
• To be able to develop knowledge, skill and attitude of evaluating tenders and preparing comparative statement.
• To be able to understand the Project Estimate and Valuation.
• To be able to Understand the Arbitration.
Subject Outcome:
Architectural & Interior design Profession, professional practice, site visit, practice of Architect profession, set- up of Architectural firm, compensation for architect’s / Designers service, controlling authority and related local authorities, building By-laws & Bangladesh National Building Code, Arbitration.
13 hours 13 minutes
17 steps
Civil Engineering Drawing (26421)
Subject Aims:
● To enable to understanding civil engineering drawing scale.
● To prepare simple building drawing
● To assist to understand the code & symbols used in civil engineering drawing .
● To enable to learning detail drawing of building components.
● To enable in learning detail drawing of different types of foundation, culvert, Road & truss.
Subject Outcomes:
● Civil engineering drawing scale.
● Drawing of single storied building.
● Code and symbols used in drawing.
● Detail drawing of different types of foundation ,flooring system in/c beam & slab, road, doors & windows, steel structure
● To enable to understanding civil engineering drawing scale.
● To prepare simple building drawing
● To assist to understand the code & symbols used in civil engineering drawing .
● To enable to learning detail drawing of building components.
● To enable in learning detail drawing of different types of foundation, culvert, Road & truss.
Subject Outcomes:
● Civil engineering drawing scale.
● Drawing of single storied building.
● Code and symbols used in drawing.
● Detail drawing of different types of foundation ,flooring system in/c beam & slab, road, doors & windows, steel structure
7 hours 47 minutes
17 steps
Civil Engineering Materials (26411)
Rational
Civil Engineering diploma holders have to supervise construction of various types of civil works involving use of various materials like stones, bricks, sand, cement, lime, tiles, timber and wood-based products, paints and varnishes, metals and other miscellaneous materials, The students should have requisite knowledge, regarding characteristics, uses and availability of various building material and skills introducing tests to determine suitability at materials for various construction purposes. In addition, specifications of various materials should also be known (PWD/BNBC) for effective quality control.
AIMS
• To be able to identify and classify the materials used for construction in civil engineering field.
• To be able to recognize the sources of various civil engineering materials.
• To be able to understand the characteristics of various civil engineering materials.
• To be able to understand the uses of different civil engineering materials.
Learning Outcome (Theoretical)
After undergoing the subject, students will be able to
• State different construction materials and their properties.
• Interpret different type of stones.
• Mention different types of bricks and Blocks.
• Describe field and laboratory tests of stone, bricks, sand, and cement.
• Illustrate different types of timber.
• Discuss different type of defects of timber.
• Explain paints/varnishes for various types of surfaces.
• State and explain different types of Modern building materials such
as ceramic, glass, metals and plastic, Tiles, Geo-Textile, Paint
Insulating materials and chemical.
Learning Outcome (Practical)
After undergoing the subject, students will be able to
1. Identify the various types of stone.
2. Demonstrate laboratory test of stone.
3. Perform field test and laboratory test of Bricks.
4. Practice field test and laboratory test of Cement.
5. Observe field test and laboratory test of Sand.
6. Perform laboratory test of mild steel.
7. Identify the various types of wood and artificial wood.
SHORT DESCRIPTION
Aspects of engineering materials; Engineering uses of Stone; Bricks; Sand; Cement; Timber; Aluminum
as construction materials, Timber & Wood based materials; Glass and ceramics; Paints and varnishes.
Plastic materials; Alloy & Mattel; Insulating materials; Geo-Textile; Lime and water proofing
materials.
Civil Engineering diploma holders have to supervise construction of various types of civil works involving use of various materials like stones, bricks, sand, cement, lime, tiles, timber and wood-based products, paints and varnishes, metals and other miscellaneous materials, The students should have requisite knowledge, regarding characteristics, uses and availability of various building material and skills introducing tests to determine suitability at materials for various construction purposes. In addition, specifications of various materials should also be known (PWD/BNBC) for effective quality control.
AIMS
• To be able to identify and classify the materials used for construction in civil engineering field.
• To be able to recognize the sources of various civil engineering materials.
• To be able to understand the characteristics of various civil engineering materials.
• To be able to understand the uses of different civil engineering materials.
Learning Outcome (Theoretical)
After undergoing the subject, students will be able to
• State different construction materials and their properties.
• Interpret different type of stones.
• Mention different types of bricks and Blocks.
• Describe field and laboratory tests of stone, bricks, sand, and cement.
• Illustrate different types of timber.
• Discuss different type of defects of timber.
• Explain paints/varnishes for various types of surfaces.
• State and explain different types of Modern building materials such
as ceramic, glass, metals and plastic, Tiles, Geo-Textile, Paint
Insulating materials and chemical.
Learning Outcome (Practical)
After undergoing the subject, students will be able to
1. Identify the various types of stone.
2. Demonstrate laboratory test of stone.
3. Perform field test and laboratory test of Bricks.
4. Practice field test and laboratory test of Cement.
5. Observe field test and laboratory test of Sand.
6. Perform laboratory test of mild steel.
7. Identify the various types of wood and artificial wood.
SHORT DESCRIPTION
Aspects of engineering materials; Engineering uses of Stone; Bricks; Sand; Cement; Timber; Aluminum
as construction materials, Timber & Wood based materials; Glass and ceramics; Paints and varnishes.
Plastic materials; Alloy & Mattel; Insulating materials; Geo-Textile; Lime and water proofing
materials.
7 hours 52 minutes
20 steps
Geotechnical Engineering
Subject Teacher : Md. Zahidul Isam, Jr. Instructor
Subject Name (Code) : Geotechnical Engineering (66445)
Technology : 4th Civil
AIMS:
At the end of the course the student will be able:
To understand of the origin, composition, classification and properties of soil.
To assist in understanding the plasticity characteristics and hydraulic properties of soil.
To assist in understanding the consolidation characteristics of soil.
To assist in understanding the lateral earth pressure of soil.
To provide understanding of the site investigation and method of sample collection.
To provide basic field skill for collection of soil sample.
To provide basic laboratory skill required to determine soil properties and to perform the relevant
calculations.
SHORT DESCRIPTION:
Introduction to geotechnical engineering; Preliminary definition and simple tests; Particle size of soil; Plasticity
characteristic of soil; Hydraulic properties of soil; Consolidation characteristics of soil; Subsurface investigation;
Lateral earth pressure; Bearing capacity of soil.
Subject Name (Code) : Geotechnical Engineering (66445)
Technology : 4th Civil
AIMS:
At the end of the course the student will be able:
To understand of the origin, composition, classification and properties of soil.
To assist in understanding the plasticity characteristics and hydraulic properties of soil.
To assist in understanding the consolidation characteristics of soil.
To assist in understanding the lateral earth pressure of soil.
To provide understanding of the site investigation and method of sample collection.
To provide basic field skill for collection of soil sample.
To provide basic laboratory skill required to determine soil properties and to perform the relevant
calculations.
SHORT DESCRIPTION:
Introduction to geotechnical engineering; Preliminary definition and simple tests; Particle size of soil; Plasticity
characteristic of soil; Hydraulic properties of soil; Consolidation characteristics of soil; Subsurface investigation;
Lateral earth pressure; Bearing capacity of soil.
3 hours
16 steps
CAD-1 (68742)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 4th Semester)
Subject Aims:
After completion of the course students will be able to:
❖ Drawing environments and drawing aids.
❖ Different setup of drawing in Auto CAD.
❖ Drawing commands. • Modification & edits of drawing.
❖ Printing the drawing elements.
Subject Outcome:
● Student will know About Drawing environments and drawing aids.
● Can ensure different setup of drawing in Auto CAD.
● Learn about Drawing commands.
● Can be able to Modification & edits of drawing.
● Can Practice how to Print the drawing elements.
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 4th Semester)
Subject Aims:
After completion of the course students will be able to:
❖ Drawing environments and drawing aids.
❖ Different setup of drawing in Auto CAD.
❖ Drawing commands. • Modification & edits of drawing.
❖ Printing the drawing elements.
Subject Outcome:
● Student will know About Drawing environments and drawing aids.
● Can ensure different setup of drawing in Auto CAD.
● Learn about Drawing commands.
● Can be able to Modification & edits of drawing.
● Can Practice how to Print the drawing elements.
1 hour 50 minutes
17 steps
Air Conditioning & Acoustics(68764)
Course Conducted By
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 6th Semester)
Subject Aims:
After completion of the course students will be able to:
❖ To be able to understand the fundamental of air condition.
❖ To be able to understand the construction procedure of air condition syste
m.
❖ To be able to understand the fundamental of architectural acoustics.
❖ To be able to prepare materials schedule, cost and development process.
Subject Outcome:
▪ Student will know about Materialsfor air conditioning system.
▪ Will learn the list of Acoustics materials.
▪ Can Design false ceiling.
▪ Knowing Aboutsound absorption.
▪ Can learn about auditorium acoustics etc.
▪ Can Estimate the Cooling & heating load after calculation. K, C, R & U factor.
▪ Will be able to design varioustypes of lighting
Lima Akter
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 6th Semester)
Subject Aims:
After completion of the course students will be able to:
❖ To be able to understand the fundamental of air condition.
❖ To be able to understand the construction procedure of air condition syste
m.
❖ To be able to understand the fundamental of architectural acoustics.
❖ To be able to prepare materials schedule, cost and development process.
Subject Outcome:
▪ Student will know about Materialsfor air conditioning system.
▪ Will learn the list of Acoustics materials.
▪ Can Design false ceiling.
▪ Knowing Aboutsound absorption.
▪ Can learn about auditorium acoustics etc.
▪ Can Estimate the Cooling & heating load after calculation. K, C, R & U factor.
▪ Will be able to design varioustypes of lighting
11 hours 41 minutes
35 steps
Interior Working Drawing-2 (68762)
Course Conducted By
Nishat Akter Munia
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 6th Semester)
Subject Outcome:
To be able to understand
The working drawing of residential building plan procedure,
The working drawing of residential building furniture drawing procedure,
The working drawing on kitchen & toilet with fixture & fittings,
The working drawing of false ceiling,
Wall partition
Cabinet and floor and materials.
Nishat Akter Munia
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 6th Semester)
Subject Outcome:
To be able to understand
The working drawing of residential building plan procedure,
The working drawing of residential building furniture drawing procedure,
The working drawing on kitchen & toilet with fixture & fittings,
The working drawing of false ceiling,
Wall partition
Cabinet and floor and materials.
10 hours 34 minutes
23 steps
Interior Working Drawing -1(68752)
Course Conducted By
Nishat Akter Munia
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 5th Semester)
To be able to draw the working drawing of living room, dining room, bedroom.
To be able to draw the working drawing of kitchen, toilet.
To be able to draw the working drawing of a 2bedroom house.
To be able to draw the working drawing of door and window.
Nishat Akter Munia
Jr. Instructor
Architecture & Interior Design Technology
Daffodil Polytechnic Institute
This Course is for: Diploma in Engineering (AIDT 5th Semester)
To be able to draw the working drawing of living room, dining room, bedroom.
To be able to draw the working drawing of kitchen, toilet.
To be able to draw the working drawing of a 2bedroom house.
To be able to draw the working drawing of door and window.
5 hours 34 minutes
16 steps
Physics-1 (25912)
To provide a foundation in scientific principals and processes for the understanding and application of technology. It will help our students to make a common base for further studies in technology and science. It also help to develop the basic knowledge of modern physics.
15 minutes
61 steps