All Courses

SHORT DESCRIPTION

To understand the flow-chart of yarn manufacturing; Ginning; Mixing and Blending; Blow-
Room; Batch & Batching; Cotton & Jute carding; Cotton and Jute drawing & doubling; Lap forming;

Combing; Simplex; Ring frame; Jute spinning frame; Yarn numbering system. To understand the basic
concepts of Winding; Warping; Sizing; Drafting & Denting; Weaving and knitting.

Subject Aims:

After completing this course, participants will be able to:
 To be able to understand computer network and information security.
 To be able to learn why network security is important
 To be able to explain network security prevention, detection and response.
 To be able to define and explain the concept of network confidentiality, information integrity, network availability, network auditability.
 To be able to understand management’s role in the development, implementation and maintenance of network security.
 To be able to understand security architecture, it’s principles, components and employment.
 To be able to understand the relationship between risks, threats, vulnerabilities and countermeasures.
 To be able to understand the need for constantly evaluating the status of security management.
 To be able to understand the difference between policies, procedures, standards, guidelines, encryption, cryptography terms, firewalls.
 To be able to understand operation of Virtual Private Networks, importance of authentication and the characteristics of a good password.

Subject Outcome:
Network and information security, network security prevention, detection and response, the concept of network confidentiality, information integrity, network availability, network auditability, security architecture, relationship between risks, threats, vulnerabilities and countermeasures, policies, procedures, standards, guidelines, encryption, cryptography terms, firewalls, Operation of Virtual Private Networks, authentication and the characteristics of a good password.

AIMS
 To be able to understand the properties of reinforced cement concrete (RCC).
 To be able to select the suitable size of reinforced concrete beams & lintels with reinforcement.
 To be able to supervise the placing of reinforcement for beams & lintel.

AIMS
• To enable to understand the behavior of incompressible fluids.
• To enable to understand the fundamentals of buoyancy.
• To enable to understand flow of liquid in closed system and in open channel.
• To assist in identifying the common measuring instruments / apparatus used in measuring the
various parameters of flowing liquid.
• To enable to applying the common measuring instruments / apparatus in measuring the various
parameters of flowing liquid.

Course Created By
Jihad Hasan
Instructor, (Textile Technology)
Daffodil Polytechnic Institute

AIMS :
1. To familiarize the students with the drawing instrument and their uses.
2. To develop the skill of the student in making designs.
3. To give the students a clear concept about light and color.
4. To familiarize with color and weave effects.
5. The students able to develop knowledge, skill and attitude in the area of Textile design and color.

SHORT DESCRIPTION

Basic concept of drawing instruments and their uses; Designing; Motif and repeat of a design; Construction of design from incomplete repeats; Light and color phenomena; Theory of color; Color harmony and contrast of color; Color and weave effect; Check-stripe and shaded design.

AIMS:
• To enable to apply the knowledge of scientific principles to problems of mechanical nature.
• To develop an understanding of mechanical properties of materials.
• To assist in applying mathematical and geometrical calculations to the analysis of statically
determinate beams.

SHORT DESCRIPTION
Mechanical properties of material; Laws of forces; Moment; Friction; Centroid and centre of gravity;
Moment of inertia; Torsion on circular shaft; Shear force and bending moment.

Course Conducted By
zayanta chandra
Daffodil Polytechnic Institute
This course is for: Diploma in Engineering (Civil 4th Semester)

Objectives of the Course:
• To enable in learning detail drawing of building components.
• To enable to undrstand and perform computer-aided design (AutoCAD).
• To be able to prepare a production drawing of a multi‐storied building.
• To be able to prepare detail drawing of building components.
• To be able to acquire knowledge and skill to prepare detail working drawing of a scheme.
• To be able to interpret the structural drawings of a multi‐storied building.
• To be able to prepare production drawings of multi‐storied buildings adopting CAD.

Short Description:
Computer-Aided Design (CAD) and plotting; 2D & 3D CAD commands; Multi‐storied building (CAD); Detail working drawing (CAD) of RCC column with footing; Lintel with sunshade; Retaining wall; Foundation, Beam, Slab, Staircase, ramp and lift core; Underground water reservoir; Septic tank.

Introduction to estimating, Quantity estimation of excavating tank, road embankment, canal digging,
Steps, boundary wall, bituminous & RCC road, estimate of a single storied two-roomed building with
Verandah and double storied building, rate analysis.

Students need to gather basic knowledge and skill on overall processes for wet processing, garments manufacturing, fashion design and merchandising before in depth study on specific subject matter as well as specialization. Fundamental knowledge and skills are the prerequisite to study specialized subjects. This course outlines the overview of wet processing and apparel manufacturing as well as introduces the basic knowledge of fashion design and merchandising.

This course is conducted by:
Md. Jihad Hasan
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.

Conducted By:
Md. Jihad Hasan
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute


After undergoing the subject, students will be able to:
Explain Man-Made Fibre manufacturing process.
Explain Regenerated Cellulosic Fiber manufacturing process.
Identify problem during production.
Provide effective solution during production.
Explain High-performance Man-Made Fibre.
Illustrate recycling process and sustainability of Man-Made Fibre

Fabric is the primary completed product of textile industry. Different apparel/garments are produced from different types of fabric. So, it is very essential for textile diploma students to identify the basic woven and knit fabrics. Textile diploma engineer’s responsibilities are identifying, analyzing and developing the supplied fabric for re-production. Fabric structure and design analysis is very important for merchant as well as factory management. This course has been designed in such a way that the upcoming textile diploma engineer’s be specialized in fabric manufacturing to analyze, identify and reproduce the advance structure of woven and knit fabric.

This course is conducted by:
Md. Jihad Hasan
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.

This course will help students to explore the merchandising concepts, core activities and get to know about successful merchandising professionals. This course deals with the activities of apparel merchandising which starts from the sourcing of the materials to the shipment of the end products to the desired destination of the buyers. Learners will learn about how to communicate with different stakeholders including suppliers, production departments, liaison offices, commercial offices, banks and buyers. Learners will learn about merchandising planning, critical analysis of lead time, and upholding negotiations with the internal and external associates. They will also learn about various importing and exporting practices like shipping, customs and port operating procedures.


This course is conducted by:
Md. Jihad Hasan
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.