All Courses

Course Conducted by
Md. Zahidul Islam
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)

AIMS
 To be able to set out different types of curve.
 To be able to conduct sounding.
 To be able to learn using total station,
 To be able to perform city survey.

SHORT DESCRIPTION
Curve ranging; Setting out Plan/alignment; Hydrographic survey; Total station; City survey.

Course Conducted by
Md. Zahidul Islam
Jr. Instructor, Civil Technology
Daffodil Polytechnic Institute.

This Course for: Diploma in Engineering (7th Semester,Civil)

AIMS:
 To be able to understand the modern techniques of construction management.
 To be able to understand the operational research & site layout and organization.
 To be able to understand the mobilization of materials in construction management.
 To be able to understand the quality and cost control.
 To be able to understand the Pre-tender and Post-tender planning.
 To be able to prepare pre-qualification documents.
 To be able to evaluate pre-qualification documents.
 To be able to prepare technical specifications.
 To be able to prepare financial evaluation.
 To be able to prepare contract clauses.
 To be able to prepare tender documents.
 To be able to prepare contract documents.
 To be able to prepare Quality control document.
 To be able to understand the cost control.
 To be able to develop knowledge, skill and attitude of evaluating tenders and preparing
comparative statement.

SHORT DESCRIPTION
Principles of management and construction; Organization of contracts department; Operational
research; Site layout and organization; Mobilization of materials; Demobilization of STRUCTURE; Safety
in construction; Quality and cost control; Codes and building by-laws; Tender; Pre-tender and Posttender planning; Tender document; Tender notice; Instruction to tender; Contract clauses/condition of
contract; Technical specifications of materials and works; Pre-qualification of contractors; Evaluation
and comparative statement; Contract agreement.

AIMS
 To be able to select suitable reinforcement and section required for reinforced cement concrete
solid floor / roof slab.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
column.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
stair slab.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
footing for brick wall and reinforced cement concrete wall.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
column footing.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
cantilever retaining wall.
 To be able to supervise the placement of reinforcement for all types of reinforced cement
concrete works..
 To be able to acquire preliminary knowledge about pre-stressed concrete.

AIMS
• To enable to understand the behavior of incompressible fluids.
• To enable to understand the fundamentals of buoyancy.
• To enable to understand flow of liquid in closed system and in open channel.
• To assist in identifying the common measuring instruments / apparatus used in measuring the
various parameters of flowing liquid.
• To enable to applying the common measuring instruments / apparatus in measuring the various
parameters of flowing liquid.

Subject Teacher : Md. Zahidul Isam, Jr. Instructor
Subject Name : Theory of Structure
Subject Code : 66454
Technology : Architecture
Semester :6th

AIMS
• To be able to consolidate and extend the fundamental understanding of the behavior of statically
determinate structures i.e. beams, frames etc.
• To be able to develop of awareness of structural behavior such as deflection and stability of
masonry dam.
• To be able to develop understanding for selection of suitable section of beam and member of the
truss.
SHORT DESCRIPTION
Shear force and bending moment of beams; Stresses in beams; Deflection of beams; Joints and
connections; Forces in frames; Steel structure; Masonry dam; Column; Moving loads; Thin Cylindrical
shells.

Diploma in Engineering holders have to use land survey for implement project. So, provide the student with the opportunity to acquire knowledge and skill to: Work with chain, plane table and Compass survey, Cadastral survey, record surveyed data and plotting map. Locate unknown points. Create the area using instruments, Calculate the area using different Methods.

AIMS:
• To enable to apply the knowledge of scientific principles to problems of mechanical nature.
• To develop an understanding of mechanical properties of materials.
• To assist in applying mathematical and geometrical calculations to the analysis of statically
determinate beams.

SHORT DESCRIPTION
Mechanical properties of material; Laws of forces; Moment; Friction; Centroid and centre of gravity;
Moment of inertia; Torsion on circular shaft; Shear force and bending moment.

Course Conducted By
zayanta chandra
Daffodil Polytechnic Institute
This course is for: Diploma in Engineering (Civil 4th Semester)

Objectives of the Course:
• To enable in learning detail drawing of building components.
• To enable to undrstand and perform computer-aided design (AutoCAD).
• To be able to prepare a production drawing of a multi‐storied building.
• To be able to prepare detail drawing of building components.
• To be able to acquire knowledge and skill to prepare detail working drawing of a scheme.
• To be able to interpret the structural drawings of a multi‐storied building.
• To be able to prepare production drawings of multi‐storied buildings adopting CAD.

Short Description:
Computer-Aided Design (CAD) and plotting; 2D & 3D CAD commands; Multi‐storied building (CAD); Detail working drawing (CAD) of RCC column with footing; Lintel with sunshade; Retaining wall; Foundation, Beam, Slab, Staircase, ramp and lift core; Underground water reservoir; Septic tank.

Subject Teacher : Md. Zahidul Islam, Jr. Instructor
Subject Name : Transportation Engineering-1
Subject Code : 66462
Technology : Civil
Semester : 6th

Subject Aims:

• To be able to understand the standard types of construction used in Bangladesh for road & pavement, bridge
& culvert to assess the advantages and disadvantages of each type.
• To be able to understand the procedure, methods & techniques used in Construction of road & pavement,
Drainage system, bridges & culverts, Embankment & cuttings.
• To be able to understand the importance of traffic control system.
• To be able to understand the maintenance, servicing & repair procedure, methods & techniques used to keep the highway operational.
• To be able to acquaint with the different aspects of airport construction.
Subject Outcome:
Modes of transportation and history of road development; Highway planning; Road Alignment and survey; Highway geometrics; Sub-grade soil; Highway materials, Construction of road formation & classification of road; Low cost road; Water bound macadam road; Bituminous road; Cement concrete road; Hill road; Highway drainage; Traffic control; Road arboriculture; Highway machinery; Highway failures & maintenance; Highway bridges & culverts; Planning of airport; Geometric standard in airport, airport building & warehouses.

Subject Teacher : Md. Zahidul Isam, Jr. Instructor
Subject Name (Code) : Geotechnical Engineering (66445)
Technology : 4th Civil

AIMS:
At the end of the course the student will be able:
 To understand of the origin, composition, classification and properties of soil.
 To assist in understanding the plasticity characteristics and hydraulic properties of soil.
 To assist in understanding the consolidation characteristics of soil.
 To assist in understanding the lateral earth pressure of soil.
 To provide understanding of the site investigation and method of sample collection.
 To provide basic field skill for collection of soil sample.
 To provide basic laboratory skill required to determine soil properties and to perform the relevant
calculations.
SHORT DESCRIPTION:
Introduction to geotechnical engineering; Preliminary definition and simple tests; Particle size of soil; Plasticity
characteristic of soil; Hydraulic properties of soil; Consolidation characteristics of soil; Subsurface investigation;
Lateral earth pressure; Bearing capacity of soil.

Introduction to estimating, Quantity estimation of excavating tank, road embankment, canal digging,
Steps, boundary wall, bituminous & RCC road, estimate of a single storied two-roomed building with
Verandah and double storied building, rate analysis.

Subject Teacher : Md. Zahidul Isam, Jr. Instructor
Subject Name : Geotechnical Engineering
Subject Code : 66445
Technology : Civil
Semester :4th

AIMS:
At the end of the course the students will be able:
 To use level and theodolite.
 To conduct leveling work.
 To recognize errors in leveling.
 To conduct traversing with theodolite.
 To determine horizontal and vertical distances of inaccessible points.

SHORT DESCRIPTION
Leveling; Errors in leveling; Contouring; Theodolite traversing, Trigonometrical leveling and Topographic surveying,

CONDUCTED BY:
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute

After undergoing the subject, students will be able to:
 Identify machineries of cotton and jute yarn manufacturing.
 Identify process sequence for cotton and jute fibers.
 Identify grading, batch, batching, emulsion preparation and softening for jute yarn manufacturing.
 Determine winding packages.
 Identify warp beams.
 Demonstrate power looms.
 Identify maintenance tools and their uses.
 Observe machine gears

CONDUCTED BY:
MUHAMMAD ZAYEDUL HAQUE
Instructor & SEIP Trainer
Department of Textile Engineering
Daffodil Polytechnic Institute

Subject Aims:
Basic aspects of textile testing, humidity, moisture in textiles, sampling, identification of textile fibers, fiber length & its measurement, fiber strength & its measurement, Trash, naps & their measurement, fiber fineness &its measurement, micromere value, fiber maturity

Subject Outcome:
Students will be understood with an opportunity to acquire knowledge & skill about Testing,
Techniques & System of Testing. Operating system of different modern Testing instruments,
Interpretation & Analysis of testing data uses & Maintenance of testing instruments.