All Courses
Yarn Manufacturing-1
CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
29 minutes
16 steps
Introduction to Textile Science
CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
14 minutes
14 steps
Clothing II (1962)
CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION OF THIS COURSE:
• Our student will develop understanding and skill on operating different sewing machine. sewing of garments by using different types of sewing machine
• Our student can operating different sewing machine.
• Our student can get knowledge of different work aid of sewing machine.
• Our student can get knowledge of Interlining.
• Our student can get knowledge of Garments Finishing.
• Our student can get knowledge of care level code.
After completing the Course student will have knowledge about different sewing machine, sewing of garments by using different types of sewing machine, knowledge of different work aid of sewing machine, Interlining, Garments finishing & Garments care level code.
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION OF THIS COURSE:
• Our student will develop understanding and skill on operating different sewing machine. sewing of garments by using different types of sewing machine
• Our student can operating different sewing machine.
• Our student can get knowledge of different work aid of sewing machine.
• Our student can get knowledge of Interlining.
• Our student can get knowledge of Garments Finishing.
• Our student can get knowledge of care level code.
After completing the Course student will have knowledge about different sewing machine, sewing of garments by using different types of sewing machine, knowledge of different work aid of sewing machine, Interlining, Garments finishing & Garments care level code.
1 hour 18 minutes
8 steps
Surveying-3 (66452)
Course Conducted by
Md. Zahidul Islam
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)
AIMS
To be able to set out different types of curve.
To be able to conduct sounding.
To be able to learn using total station,
To be able to perform city survey.
SHORT DESCRIPTION
Curve ranging; Setting out Plan/alignment; Hydrographic survey; Total station; City survey.
Md. Zahidul Islam
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)
AIMS
To be able to set out different types of curve.
To be able to conduct sounding.
To be able to learn using total station,
To be able to perform city survey.
SHORT DESCRIPTION
Curve ranging; Setting out Plan/alignment; Hydrographic survey; Total station; City survey.
1 hour
9 steps
Construction Management & Documentation
Course Conducted by
Md. Zahidul Islam
Jr. Instructor, Civil Technology
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (7th Semester,Civil)
AIMS:
To be able to understand the modern techniques of construction management.
To be able to understand the operational research & site layout and organization.
To be able to understand the mobilization of materials in construction management.
To be able to understand the quality and cost control.
To be able to understand the Pre-tender and Post-tender planning.
To be able to prepare pre-qualification documents.
To be able to evaluate pre-qualification documents.
To be able to prepare technical specifications.
To be able to prepare financial evaluation.
To be able to prepare contract clauses.
To be able to prepare tender documents.
To be able to prepare contract documents.
To be able to prepare Quality control document.
To be able to understand the cost control.
To be able to develop knowledge, skill and attitude of evaluating tenders and preparing
comparative statement.
SHORT DESCRIPTION
Principles of management and construction; Organization of contracts department; Operational
research; Site layout and organization; Mobilization of materials; Demobilization of STRUCTURE; Safety
in construction; Quality and cost control; Codes and building by-laws; Tender; Pre-tender and Posttender planning; Tender document; Tender notice; Instruction to tender; Contract clauses/condition of
contract; Technical specifications of materials and works; Pre-qualification of contractors; Evaluation
and comparative statement; Contract agreement.
Md. Zahidul Islam
Jr. Instructor, Civil Technology
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (7th Semester,Civil)
AIMS:
To be able to understand the modern techniques of construction management.
To be able to understand the operational research & site layout and organization.
To be able to understand the mobilization of materials in construction management.
To be able to understand the quality and cost control.
To be able to understand the Pre-tender and Post-tender planning.
To be able to prepare pre-qualification documents.
To be able to evaluate pre-qualification documents.
To be able to prepare technical specifications.
To be able to prepare financial evaluation.
To be able to prepare contract clauses.
To be able to prepare tender documents.
To be able to prepare contract documents.
To be able to prepare Quality control document.
To be able to understand the cost control.
To be able to develop knowledge, skill and attitude of evaluating tenders and preparing
comparative statement.
SHORT DESCRIPTION
Principles of management and construction; Organization of contracts department; Operational
research; Site layout and organization; Mobilization of materials; Demobilization of STRUCTURE; Safety
in construction; Quality and cost control; Codes and building by-laws; Tender; Pre-tender and Posttender planning; Tender document; Tender notice; Instruction to tender; Contract clauses/condition of
contract; Technical specifications of materials and works; Pre-qualification of contractors; Evaluation
and comparative statement; Contract agreement.
5 minutes
11 steps
Design of Structure – 2
AIMS
To be able to select suitable reinforcement and section required for reinforced cement concrete
solid floor / roof slab.
To be able to select suitable reinforcement and section required for reinforced cement concrete
column.
To be able to select suitable reinforcement and section required for reinforced cement concrete
stair slab.
To be able to select suitable reinforcement and section required for reinforced cement concrete
footing for brick wall and reinforced cement concrete wall.
To be able to select suitable reinforcement and section required for reinforced cement concrete
column footing.
To be able to select suitable reinforcement and section required for reinforced cement concrete
cantilever retaining wall.
To be able to supervise the placement of reinforcement for all types of reinforced cement
concrete works..
To be able to acquire preliminary knowledge about pre-stressed concrete.
To be able to select suitable reinforcement and section required for reinforced cement concrete
solid floor / roof slab.
To be able to select suitable reinforcement and section required for reinforced cement concrete
column.
To be able to select suitable reinforcement and section required for reinforced cement concrete
stair slab.
To be able to select suitable reinforcement and section required for reinforced cement concrete
footing for brick wall and reinforced cement concrete wall.
To be able to select suitable reinforcement and section required for reinforced cement concrete
column footing.
To be able to select suitable reinforcement and section required for reinforced cement concrete
cantilever retaining wall.
To be able to supervise the placement of reinforcement for all types of reinforced cement
concrete works..
To be able to acquire preliminary knowledge about pre-stressed concrete.
3 hours 12 minutes
17 steps
Theory of Structure [66454]
Subject Teacher : Md. Zahidul Isam, Jr. Instructor
Subject Name : Theory of Structure
Subject Code : 66454
Technology : Architecture
Semester :6th
AIMS
• To be able to consolidate and extend the fundamental understanding of the behavior of statically
determinate structures i.e. beams, frames etc.
• To be able to develop of awareness of structural behavior such as deflection and stability of
masonry dam.
• To be able to develop understanding for selection of suitable section of beam and member of the
truss.
SHORT DESCRIPTION
Shear force and bending moment of beams; Stresses in beams; Deflection of beams; Joints and
connections; Forces in frames; Steel structure; Masonry dam; Column; Moving loads; Thin Cylindrical
shells.
Subject Name : Theory of Structure
Subject Code : 66454
Technology : Architecture
Semester :6th
AIMS
• To be able to consolidate and extend the fundamental understanding of the behavior of statically
determinate structures i.e. beams, frames etc.
• To be able to develop of awareness of structural behavior such as deflection and stability of
masonry dam.
• To be able to develop understanding for selection of suitable section of beam and member of the
truss.
SHORT DESCRIPTION
Shear force and bending moment of beams; Stresses in beams; Deflection of beams; Joints and
connections; Forces in frames; Steel structure; Masonry dam; Column; Moving loads; Thin Cylindrical
shells.
7 hours 29 minutes
16 steps
Yarn Manufacturing 3 (1951)
CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
AIMS
To enable the students with an opportunity to acquire knowledge, skill and attitude in the area of yarn manufacturing with special emphasis on
• Roving Frame/Speed frame/Simplex
• Ring frame
• Conditioning
• Winding
• Reeling
• Bundling and baling
• Waste
SHORT DESCRIPTION
The basic concept of ring-spinning frame; Component parts of the ring-spinning frame; Drafting and roller setting; Ring, traveler & spindle of ring-spinning frame; Faults, change places and waste in spinning; Conditioning of yarn; Winding; Reeling; Bundling and baling; jute spinning frame; Draft & Twist of spinning frame; Building & winding; Technical aspects of spinning frame; Waste in cotton spinning.
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
AIMS
To enable the students with an opportunity to acquire knowledge, skill and attitude in the area of yarn manufacturing with special emphasis on
• Roving Frame/Speed frame/Simplex
• Ring frame
• Conditioning
• Winding
• Reeling
• Bundling and baling
• Waste
SHORT DESCRIPTION
The basic concept of ring-spinning frame; Component parts of the ring-spinning frame; Drafting and roller setting; Ring, traveler & spindle of ring-spinning frame; Faults, change places and waste in spinning; Conditioning of yarn; Winding; Reeling; Bundling and baling; jute spinning frame; Draft & Twist of spinning frame; Building & winding; Technical aspects of spinning frame; Waste in cotton spinning.
29 minutes
19 steps
Production Planning & Control (7074)
CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION
1. To develop the basic knowledge regarding production control
2. To develop knowledge & skill about different planning
3. To acquire knowledge to make different inventory control
4. To acquire knowledge to know different production calculation
SHORT DESCRIPTION ABOUT BOOKS STUDIES:
Production system; division of labor; production planning; localization of industry; time study and motion study; selection of factory site; factory building; plant layout; equipment layout; operation of the factory; production control; quality control; cost control; inventory control; materials handling; case study.
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
INTENTION
1. To develop the basic knowledge regarding production control
2. To develop knowledge & skill about different planning
3. To acquire knowledge to make different inventory control
4. To acquire knowledge to know different production calculation
SHORT DESCRIPTION ABOUT BOOKS STUDIES:
Production system; division of labor; production planning; localization of industry; time study and motion study; selection of factory site; factory building; plant layout; equipment layout; operation of the factory; production control; quality control; cost control; inventory control; materials handling; case study.
47 minutes
27 steps
Surveying-1(26432)
Diploma in Engineering holders have to use land survey for implement project. So, provide the student with the opportunity to acquire knowledge and skill to: Work with chain, plane table and Compass survey, Cadastral survey, record surveyed data and plotting map. Locate unknown points. Create the area using instruments, Calculate the area using different Methods.
5 hours 25 minutes
7 steps
Transportation Engineering-1
Subject Teacher : Md. Zahidul Islam, Jr. Instructor
Subject Name : Transportation Engineering-1
Subject Code : 66462
Technology : Civil
Semester : 6th
Subject Aims:
• To be able to understand the standard types of construction used in Bangladesh for road & pavement, bridge
& culvert to assess the advantages and disadvantages of each type.
• To be able to understand the procedure, methods & techniques used in Construction of road & pavement,
Drainage system, bridges & culverts, Embankment & cuttings.
• To be able to understand the importance of traffic control system.
• To be able to understand the maintenance, servicing & repair procedure, methods & techniques used to keep the highway operational.
• To be able to acquaint with the different aspects of airport construction.
Subject Outcome:
Modes of transportation and history of road development; Highway planning; Road Alignment and survey; Highway geometrics; Sub-grade soil; Highway materials, Construction of road formation & classification of road; Low cost road; Water bound macadam road; Bituminous road; Cement concrete road; Hill road; Highway drainage; Traffic control; Road arboriculture; Highway machinery; Highway failures & maintenance; Highway bridges & culverts; Planning of airport; Geometric standard in airport, airport building & warehouses.
Subject Name : Transportation Engineering-1
Subject Code : 66462
Technology : Civil
Semester : 6th
Subject Aims:
• To be able to understand the standard types of construction used in Bangladesh for road & pavement, bridge
& culvert to assess the advantages and disadvantages of each type.
• To be able to understand the procedure, methods & techniques used in Construction of road & pavement,
Drainage system, bridges & culverts, Embankment & cuttings.
• To be able to understand the importance of traffic control system.
• To be able to understand the maintenance, servicing & repair procedure, methods & techniques used to keep the highway operational.
• To be able to acquaint with the different aspects of airport construction.
Subject Outcome:
Modes of transportation and history of road development; Highway planning; Road Alignment and survey; Highway geometrics; Sub-grade soil; Highway materials, Construction of road formation & classification of road; Low cost road; Water bound macadam road; Bituminous road; Cement concrete road; Hill road; Highway drainage; Traffic control; Road arboriculture; Highway machinery; Highway failures & maintenance; Highway bridges & culverts; Planning of airport; Geometric standard in airport, airport building & warehouses.
1 hour 10 minutes
11 steps
Geotechnical Engineering
Subject Teacher : Md. Zahidul Isam, Jr. Instructor
Subject Name (Code) : Geotechnical Engineering (66445)
Technology : 4th Civil
AIMS:
At the end of the course the student will be able:
To understand of the origin, composition, classification and properties of soil.
To assist in understanding the plasticity characteristics and hydraulic properties of soil.
To assist in understanding the consolidation characteristics of soil.
To assist in understanding the lateral earth pressure of soil.
To provide understanding of the site investigation and method of sample collection.
To provide basic field skill for collection of soil sample.
To provide basic laboratory skill required to determine soil properties and to perform the relevant
calculations.
SHORT DESCRIPTION:
Introduction to geotechnical engineering; Preliminary definition and simple tests; Particle size of soil; Plasticity
characteristic of soil; Hydraulic properties of soil; Consolidation characteristics of soil; Subsurface investigation;
Lateral earth pressure; Bearing capacity of soil.
Subject Name (Code) : Geotechnical Engineering (66445)
Technology : 4th Civil
AIMS:
At the end of the course the student will be able:
To understand of the origin, composition, classification and properties of soil.
To assist in understanding the plasticity characteristics and hydraulic properties of soil.
To assist in understanding the consolidation characteristics of soil.
To assist in understanding the lateral earth pressure of soil.
To provide understanding of the site investigation and method of sample collection.
To provide basic field skill for collection of soil sample.
To provide basic laboratory skill required to determine soil properties and to perform the relevant
calculations.
SHORT DESCRIPTION:
Introduction to geotechnical engineering; Preliminary definition and simple tests; Particle size of soil; Plasticity
characteristic of soil; Hydraulic properties of soil; Consolidation characteristics of soil; Subsurface investigation;
Lateral earth pressure; Bearing capacity of soil.
3 hours
16 steps
Surveying- 2
Subject Teacher : Md. Zahidul Isam, Jr. Instructor
Subject Name : Geotechnical Engineering
Subject Code : 66445
Technology : Civil
Semester :4th
AIMS:
At the end of the course the students will be able:
To use level and theodolite.
To conduct leveling work.
To recognize errors in leveling.
To conduct traversing with theodolite.
To determine horizontal and vertical distances of inaccessible points.
SHORT DESCRIPTION
Leveling; Errors in leveling; Contouring; Theodolite traversing, Trigonometrical leveling and Topographic surveying,
Subject Name : Geotechnical Engineering
Subject Code : 66445
Technology : Civil
Semester :4th
AIMS:
At the end of the course the students will be able:
To use level and theodolite.
To conduct leveling work.
To recognize errors in leveling.
To conduct traversing with theodolite.
To determine horizontal and vertical distances of inaccessible points.
SHORT DESCRIPTION
Leveling; Errors in leveling; Contouring; Theodolite traversing, Trigonometrical leveling and Topographic surveying,
3 hours 20 minutes
21 steps
TEXTILE TESTING & QUALITY CONTROL (5045)
CONDUCTED BY:
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Subject Aims:
Basic aspects of textile testing, humidity, moisture in textiles, sampling, identification of textile fibers, fiber length & its measurement, fiber strength & its measurement, Trash, naps & their measurement, fiber fineness &its measurement, micromere value, fiber maturity
Subject Outcome:
Students will be understood with an opportunity to acquire knowledge & skill about Testing,
Techniques & System of Testing. The operating system of different modern Testing instruments,
Interpretation & Analysis of testing data use & Maintenance of testing instruments.
Emam Shad Ahmed
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Subject Aims:
Basic aspects of textile testing, humidity, moisture in textiles, sampling, identification of textile fibers, fiber length & its measurement, fiber strength & its measurement, Trash, naps & their measurement, fiber fineness &its measurement, micromere value, fiber maturity
Subject Outcome:
Students will be understood with an opportunity to acquire knowledge & skill about Testing,
Techniques & System of Testing. The operating system of different modern Testing instruments,
Interpretation & Analysis of testing data use & Maintenance of testing instruments.
4 hours 22 minutes
17 steps
Clothing 1 (1954)
CONDUCTED BY:
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
AIMS
To enable the student a clear idea of garments.
To develop basic knowledge and skill of garment cloth.
To develop basic knowledge of garment accessories.
SHORT DESCRIPTION:
Garments; Garment accessories; Tailoring process; Patternmaking; Marker; Cutting machines; Fabric spreading; Seam & sewing.
Sabina Yasmin
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
AIMS
To enable the student a clear idea of garments.
To develop basic knowledge and skill of garment cloth.
To develop basic knowledge of garment accessories.
SHORT DESCRIPTION:
Garments; Garment accessories; Tailoring process; Patternmaking; Marker; Cutting machines; Fabric spreading; Seam & sewing.
38 minutes
11 steps