All Courses
Advanced Short Staple Spinning (1972)
CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
1 hour 22 minutes
14 steps
Basics of Mathematics
Course Conducted by
M.M. Shahanuzzaman,
Instructor,
Daffodil Polytechnic Institute.
This basic of Mathematics Course. There are 3 important topics include in this Course, such as Geometry, Trigonometry & Algebra.
M.M. Shahanuzzaman,
Instructor,
Daffodil Polytechnic Institute.
This basic of Mathematics Course. There are 3 important topics include in this Course, such as Geometry, Trigonometry & Algebra.
0 steps
Textile Calculation-2 (1977)
CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
INTENTION
To develop the basic knowledge to calculate :
a) Winding b) Warping
c) Sizing d) Loom and knitting production.
e) Read count and heald count. f) Fabric calculation
g) Fabric requirement in garment. h) Sewing thread consumption
i) Costing j) Gearing Calculation
SHORT DESCRIPTION:
Calculation of winding; Calculation of warping; Calculation of sizing;Calculation of heald count and Reed count; Calculation of loom and
knitting productions,Cloth calculation; Calculation of cloth requirement in garments; Sewing thread consumption & costing.
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
INTENTION
To develop the basic knowledge to calculate :
a) Winding b) Warping
c) Sizing d) Loom and knitting production.
e) Read count and heald count. f) Fabric calculation
g) Fabric requirement in garment. h) Sewing thread consumption
i) Costing j) Gearing Calculation
SHORT DESCRIPTION:
Calculation of winding; Calculation of warping; Calculation of sizing;Calculation of heald count and Reed count; Calculation of loom and
knitting productions,Cloth calculation; Calculation of cloth requirement in garments; Sewing thread consumption & costing.
2 hours 53 minutes
14 steps
Construction Process-2(26441)
Course Conducted by
Md. Emon Khan.
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester Civil)
AIMS
After completion of the course the students will be able to:
Understand the construction process of arch and lintel.
Understand the construction process of different types of floor.
Understand the construction process of stairs.
Understand the construction process of different types of roof.
Understand the different finishing works in building.
Understand the construction process of doors and windows.
Understand the different operation and maintenance construction equipment.
Understand the construction of bridge, culvert, canals etc.
SHORT DESCRIPTION
Arches; Lintels; Ground floors; Upper floors; Damp proofing; Termite treatment; Stairs; Roof; Pitched
roof; Plastering and pointing; Doors; Windows; Carpentry and joinery; Scaffolding; Form works, Pointing
& Varnishing, construction equipment, Building Services, Insulation, bridge/culverts and canals etc.
Md. Emon Khan.
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester Civil)
AIMS
After completion of the course the students will be able to:
Understand the construction process of arch and lintel.
Understand the construction process of different types of floor.
Understand the construction process of stairs.
Understand the construction process of different types of roof.
Understand the different finishing works in building.
Understand the construction process of doors and windows.
Understand the different operation and maintenance construction equipment.
Understand the construction of bridge, culvert, canals etc.
SHORT DESCRIPTION
Arches; Lintels; Ground floors; Upper floors; Damp proofing; Termite treatment; Stairs; Roof; Pitched
roof; Plastering and pointing; Doors; Windows; Carpentry and joinery; Scaffolding; Form works, Pointing
& Varnishing, construction equipment, Building Services, Insulation, bridge/culverts and canals etc.
2 hours 15 minutes
6 steps
Construction Management & Documentation
Course Conducted by
Md. Zahidul Islam
Jr. Instructor, Civil Technology
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (7th Semester,Civil)
AIMS:
To be able to understand the modern techniques of construction management.
To be able to understand the operational research & site layout and organization.
To be able to understand the mobilization of materials in construction management.
To be able to understand the quality and cost control.
To be able to understand the Pre-tender and Post-tender planning.
To be able to prepare pre-qualification documents.
To be able to evaluate pre-qualification documents.
To be able to prepare technical specifications.
To be able to prepare financial evaluation.
To be able to prepare contract clauses.
To be able to prepare tender documents.
To be able to prepare contract documents.
To be able to prepare Quality control document.
To be able to understand the cost control.
To be able to develop knowledge, skill and attitude of evaluating tenders and preparing
comparative statement.
SHORT DESCRIPTION
Principles of management and construction; Organization of contracts department; Operational
research; Site layout and organization; Mobilization of materials; Demobilization of STRUCTURE; Safety
in construction; Quality and cost control; Codes and building by-laws; Tender; Pre-tender and Posttender planning; Tender document; Tender notice; Instruction to tender; Contract clauses/condition of
contract; Technical specifications of materials and works; Pre-qualification of contractors; Evaluation
and comparative statement; Contract agreement.
Md. Zahidul Islam
Jr. Instructor, Civil Technology
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (7th Semester,Civil)
AIMS:
To be able to understand the modern techniques of construction management.
To be able to understand the operational research & site layout and organization.
To be able to understand the mobilization of materials in construction management.
To be able to understand the quality and cost control.
To be able to understand the Pre-tender and Post-tender planning.
To be able to prepare pre-qualification documents.
To be able to evaluate pre-qualification documents.
To be able to prepare technical specifications.
To be able to prepare financial evaluation.
To be able to prepare contract clauses.
To be able to prepare tender documents.
To be able to prepare contract documents.
To be able to prepare Quality control document.
To be able to understand the cost control.
To be able to develop knowledge, skill and attitude of evaluating tenders and preparing
comparative statement.
SHORT DESCRIPTION
Principles of management and construction; Organization of contracts department; Operational
research; Site layout and organization; Mobilization of materials; Demobilization of STRUCTURE; Safety
in construction; Quality and cost control; Codes and building by-laws; Tender; Pre-tender and Posttender planning; Tender document; Tender notice; Instruction to tender; Contract clauses/condition of
contract; Technical specifications of materials and works; Pre-qualification of contractors; Evaluation
and comparative statement; Contract agreement.
5 minutes
11 steps
Water Resource Engineering (26461)
Course Conducted by
Uchingla Marma Rupu
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (7th Semester,Civil)
AIMS
• To provide understanding on the influence of the climatic condition of Bangladesh on its ground
water and surface water flow
• To provide understanding of recharging of underground water and ascertain its necessity in
Bangladesh.
• To enable to select a suitable source of water and method of irrigation for particular situation.
• To enable to select a suitable method of drainage for particular situation.
• To enable to select a suitable method for control of rivers and flood in Bangladesh.
• To understand rain water harvesting.
SHORT DESCRIPTION
Sources of water; Rainfall and run-off; Lifting of underground water; Storing and Recharging of
ground/rain water; Irrigation and its effect; Well irrigation; Water requirements for crops; and quality
of irrigation water; Storage reservoir; Dam and dyke; Irrigation canals; Silt deposit; Scouring; Canal
works; Drainage; River training works; Flood and flood management and flood control; Irrigation
projects in Bangladesh.
Uchingla Marma Rupu
Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (7th Semester,Civil)
AIMS
• To provide understanding on the influence of the climatic condition of Bangladesh on its ground
water and surface water flow
• To provide understanding of recharging of underground water and ascertain its necessity in
Bangladesh.
• To enable to select a suitable source of water and method of irrigation for particular situation.
• To enable to select a suitable method of drainage for particular situation.
• To enable to select a suitable method for control of rivers and flood in Bangladesh.
• To understand rain water harvesting.
SHORT DESCRIPTION
Sources of water; Rainfall and run-off; Lifting of underground water; Storing and Recharging of
ground/rain water; Irrigation and its effect; Well irrigation; Water requirements for crops; and quality
of irrigation water; Storage reservoir; Dam and dyke; Irrigation canals; Silt deposit; Scouring; Canal
works; Drainage; River training works; Flood and flood management and flood control; Irrigation
projects in Bangladesh.
4 hours 50 minutes
21 steps
Civil Engineering Materials (26411)
Rational
Civil Engineering diploma holders have to supervise construction of various types of civil works involving use of various materials like stones, bricks, sand, cement, lime, tiles, timber and wood-based products, paints and varnishes, metals and other miscellaneous materials, The students should have requisite knowledge, regarding characteristics, uses and availability of various building material and skills introducing tests to determine suitability at materials for various construction purposes. In addition, specifications of various materials should also be known (PWD/BNBC) for effective quality control.
AIMS
• To be able to identify and classify the materials used for construction in civil engineering field.
• To be able to recognize the sources of various civil engineering materials.
• To be able to understand the characteristics of various civil engineering materials.
• To be able to understand the uses of different civil engineering materials.
Learning Outcome (Theoretical)
After undergoing the subject, students will be able to
• State different construction materials and their properties.
• Interpret different type of stones.
• Mention different types of bricks and Blocks.
• Describe field and laboratory tests of stone, bricks, sand, and cement.
• Illustrate different types of timber.
• Discuss different type of defects of timber.
• Explain paints/varnishes for various types of surfaces.
• State and explain different types of Modern building materials such
as ceramic, glass, metals and plastic, Tiles, Geo-Textile, Paint
Insulating materials and chemical.
Learning Outcome (Practical)
After undergoing the subject, students will be able to
1. Identify the various types of stone.
2. Demonstrate laboratory test of stone.
3. Perform field test and laboratory test of Bricks.
4. Practice field test and laboratory test of Cement.
5. Observe field test and laboratory test of Sand.
6. Perform laboratory test of mild steel.
7. Identify the various types of wood and artificial wood.
SHORT DESCRIPTION
Aspects of engineering materials; Engineering uses of Stone; Bricks; Sand; Cement; Timber; Aluminum
as construction materials, Timber & Wood based materials; Glass and ceramics; Paints and varnishes.
Plastic materials; Alloy & Mattel; Insulating materials; Geo-Textile; Lime and water proofing
materials.
Civil Engineering diploma holders have to supervise construction of various types of civil works involving use of various materials like stones, bricks, sand, cement, lime, tiles, timber and wood-based products, paints and varnishes, metals and other miscellaneous materials, The students should have requisite knowledge, regarding characteristics, uses and availability of various building material and skills introducing tests to determine suitability at materials for various construction purposes. In addition, specifications of various materials should also be known (PWD/BNBC) for effective quality control.
AIMS
• To be able to identify and classify the materials used for construction in civil engineering field.
• To be able to recognize the sources of various civil engineering materials.
• To be able to understand the characteristics of various civil engineering materials.
• To be able to understand the uses of different civil engineering materials.
Learning Outcome (Theoretical)
After undergoing the subject, students will be able to
• State different construction materials and their properties.
• Interpret different type of stones.
• Mention different types of bricks and Blocks.
• Describe field and laboratory tests of stone, bricks, sand, and cement.
• Illustrate different types of timber.
• Discuss different type of defects of timber.
• Explain paints/varnishes for various types of surfaces.
• State and explain different types of Modern building materials such
as ceramic, glass, metals and plastic, Tiles, Geo-Textile, Paint
Insulating materials and chemical.
Learning Outcome (Practical)
After undergoing the subject, students will be able to
1. Identify the various types of stone.
2. Demonstrate laboratory test of stone.
3. Perform field test and laboratory test of Bricks.
4. Practice field test and laboratory test of Cement.
5. Observe field test and laboratory test of Sand.
6. Perform laboratory test of mild steel.
7. Identify the various types of wood and artificial wood.
SHORT DESCRIPTION
Aspects of engineering materials; Engineering uses of Stone; Bricks; Sand; Cement; Timber; Aluminum
as construction materials, Timber & Wood based materials; Glass and ceramics; Paints and varnishes.
Plastic materials; Alloy & Mattel; Insulating materials; Geo-Textile; Lime and water proofing
materials.
7 hours 52 minutes
20 steps
Wet Processing-1 (21341)
Course Conducted by
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
3 hours 1 minute
18 steps
Geotechnical Engineering
Subject Teacher : Md. Zahidul Isam, Jr. Instructor
Subject Name (Code) : Geotechnical Engineering (66445)
Technology : 4th Civil
AIMS:
At the end of the course the student will be able:
To understand of the origin, composition, classification and properties of soil.
To assist in understanding the plasticity characteristics and hydraulic properties of soil.
To assist in understanding the consolidation characteristics of soil.
To assist in understanding the lateral earth pressure of soil.
To provide understanding of the site investigation and method of sample collection.
To provide basic field skill for collection of soil sample.
To provide basic laboratory skill required to determine soil properties and to perform the relevant
calculations.
SHORT DESCRIPTION:
Introduction to geotechnical engineering; Preliminary definition and simple tests; Particle size of soil; Plasticity
characteristic of soil; Hydraulic properties of soil; Consolidation characteristics of soil; Subsurface investigation;
Lateral earth pressure; Bearing capacity of soil.
Subject Name (Code) : Geotechnical Engineering (66445)
Technology : 4th Civil
AIMS:
At the end of the course the student will be able:
To understand of the origin, composition, classification and properties of soil.
To assist in understanding the plasticity characteristics and hydraulic properties of soil.
To assist in understanding the consolidation characteristics of soil.
To assist in understanding the lateral earth pressure of soil.
To provide understanding of the site investigation and method of sample collection.
To provide basic field skill for collection of soil sample.
To provide basic laboratory skill required to determine soil properties and to perform the relevant
calculations.
SHORT DESCRIPTION:
Introduction to geotechnical engineering; Preliminary definition and simple tests; Particle size of soil; Plasticity
characteristic of soil; Hydraulic properties of soil; Consolidation characteristics of soil; Subsurface investigation;
Lateral earth pressure; Bearing capacity of soil.
3 hours
16 steps
Garments CAD & CAM-II
CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.
1 hour 44 minutes
9 steps
Advanced Fabric Manufacturing-I (21261)
CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute
0 steps