All Courses

Course Conducted by
Md. Zahidul Islam
Jr. Instructor,
Daffodil Polytechnic Institute.
This Course for: Diploma in Engineering (5th Semester,Civil)

AIMS
 To be able to set out different types of curve.
 To be able to conduct sounding.
 To be able to learn using total station,
 To be able to perform city survey.

SHORT DESCRIPTION
Curve ranging; Setting out Plan/alignment; Hydrographic survey; Total station; City survey.

Course Conducted by
Md. Zahidul Islam
Jr. Instructor, Civil Technology
Daffodil Polytechnic Institute.

This Course for: Diploma in Engineering (7th Semester,Civil)

AIMS:
 To be able to understand the modern techniques of construction management.
 To be able to understand the operational research & site layout and organization.
 To be able to understand the mobilization of materials in construction management.
 To be able to understand the quality and cost control.
 To be able to understand the Pre-tender and Post-tender planning.
 To be able to prepare pre-qualification documents.
 To be able to evaluate pre-qualification documents.
 To be able to prepare technical specifications.
 To be able to prepare financial evaluation.
 To be able to prepare contract clauses.
 To be able to prepare tender documents.
 To be able to prepare contract documents.
 To be able to prepare Quality control document.
 To be able to understand the cost control.
 To be able to develop knowledge, skill and attitude of evaluating tenders and preparing
comparative statement.

SHORT DESCRIPTION
Principles of management and construction; Organization of contracts department; Operational
research; Site layout and organization; Mobilization of materials; Demobilization of STRUCTURE; Safety
in construction; Quality and cost control; Codes and building by-laws; Tender; Pre-tender and Posttender planning; Tender document; Tender notice; Instruction to tender; Contract clauses/condition of
contract; Technical specifications of materials and works; Pre-qualification of contractors; Evaluation
and comparative statement; Contract agreement.

AIMS
 To be able to select suitable reinforcement and section required for reinforced cement concrete
solid floor / roof slab.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
column.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
stair slab.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
footing for brick wall and reinforced cement concrete wall.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
column footing.
 To be able to select suitable reinforcement and section required for reinforced cement concrete
cantilever retaining wall.
 To be able to supervise the placement of reinforcement for all types of reinforced cement
concrete works..
 To be able to acquire preliminary knowledge about pre-stressed concrete.

Subject Teacher : Md. Zahidul Isam, Jr. Instructor
Subject Name : Theory of Structure
Subject Code : 66454
Technology : Architecture
Semester :6th

AIMS
• To be able to consolidate and extend the fundamental understanding of the behavior of statically
determinate structures i.e. beams, frames etc.
• To be able to develop of awareness of structural behavior such as deflection and stability of
masonry dam.
• To be able to develop understanding for selection of suitable section of beam and member of the
truss.
SHORT DESCRIPTION
Shear force and bending moment of beams; Stresses in beams; Deflection of beams; Joints and
connections; Forces in frames; Steel structure; Masonry dam; Column; Moving loads; Thin Cylindrical
shells.

Course Created By
Md. Ashikur Rahman
Instructor, Textile & GDPM
Daffodil Polytechnic Institute

AIMS :
1. To familiarize the students with the drawing instrument and their uses.
2. To develop the skill of the student in making designs.
3. To give the students a clear concept about light and color.
4. To familiarize with color and weave effects.
5. The students able to develop knowledge, skill and attitude in the area of Textile design and color.

SHORT DESCRIPTION

Basic concept of drawing instruments and their uses; Designing; Motif and repeat of a design; Construction of design from incomplete repeats; Light and color phenomena; Theory of color; Color harmony and contrast of color; Color and weave effect; Check-stripe and shaded design.

Diploma in Engineering holders have to use land survey for implement project. So, provide the student with the opportunity to acquire knowledge and skill to: Work with chain, plane table and Compass survey, Cadastral survey, record surveyed data and plotting map. Locate unknown points. Create the area using instruments, Calculate the area using different Methods.

Subject Teacher : Md. Zahidul Islam, Jr. Instructor
Subject Name : Transportation Engineering-1
Subject Code : 66462
Technology : Civil
Semester : 6th

Subject Aims:

• To be able to understand the standard types of construction used in Bangladesh for road & pavement, bridge
& culvert to assess the advantages and disadvantages of each type.
• To be able to understand the procedure, methods & techniques used in Construction of road & pavement,
Drainage system, bridges & culverts, Embankment & cuttings.
• To be able to understand the importance of traffic control system.
• To be able to understand the maintenance, servicing & repair procedure, methods & techniques used to keep the highway operational.
• To be able to acquaint with the different aspects of airport construction.
Subject Outcome:
Modes of transportation and history of road development; Highway planning; Road Alignment and survey; Highway geometrics; Sub-grade soil; Highway materials, Construction of road formation & classification of road; Low cost road; Water bound macadam road; Bituminous road; Cement concrete road; Hill road; Highway drainage; Traffic control; Road arboriculture; Highway machinery; Highway failures & maintenance; Highway bridges & culverts; Planning of airport; Geometric standard in airport, airport building & warehouses.

Subject Teacher : Md. Zahidul Isam, Jr. Instructor
Subject Name (Code) : Geotechnical Engineering (66445)
Technology : 4th Civil

AIMS:
At the end of the course the student will be able:
 To understand of the origin, composition, classification and properties of soil.
 To assist in understanding the plasticity characteristics and hydraulic properties of soil.
 To assist in understanding the consolidation characteristics of soil.
 To assist in understanding the lateral earth pressure of soil.
 To provide understanding of the site investigation and method of sample collection.
 To provide basic field skill for collection of soil sample.
 To provide basic laboratory skill required to determine soil properties and to perform the relevant
calculations.
SHORT DESCRIPTION:
Introduction to geotechnical engineering; Preliminary definition and simple tests; Particle size of soil; Plasticity
characteristic of soil; Hydraulic properties of soil; Consolidation characteristics of soil; Subsurface investigation;
Lateral earth pressure; Bearing capacity of soil.

Subject Teacher : Md. Zahidul Isam, Jr. Instructor
Subject Name : Geotechnical Engineering
Subject Code : 66445
Technology : Civil
Semester :4th

AIMS:
At the end of the course the students will be able:
 To use level and theodolite.
 To conduct leveling work.
 To recognize errors in leveling.
 To conduct traversing with theodolite.
 To determine horizontal and vertical distances of inaccessible points.

SHORT DESCRIPTION
Leveling; Errors in leveling; Contouring; Theodolite traversing, Trigonometrical leveling and Topographic surveying,

Students need to gather basic knowledge and skill on overall processes for wet processing, garments manufacturing, fashion design and merchandising before in depth study on specific subject matter as well as specialization. Fundamental knowledge and skills are the prerequisite to study specialized subjects. This course outlines the overview of wet processing and apparel manufacturing as well as introduces the basic knowledge of fashion design and merchandising.

This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.

The textile industry plays a very significant role in the GDP of Bangladesh. For the smooth running of this sector diploma textile engineers are required in the mid-level who are playing key roles in this sector. To prepare an appropriate diploma graduate should have sufficient knowledge in Apparel Manufacturing-I. To attain this objective, we have added this course to the diploma level which consists of apparel manufacturing process containing pattern making, pattern grading, marker making, CAD & CAM, fabric inspection, fabric relaxation, fabric spreading, and fabric cutting process. By acquiring that knowledge, skills and attitude students will be able to gather apparel manufacturing technology as well as able to study in further courses.

This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.

The textile industry specially RMG sector plays a very significant role in the GDP of Bangladesh. For the smooth running of this sector diploma textile engineers are required in the mid-level who are playing key roles in this sector. To prepare an appropriate diploma graduate should have sufficient knowledge in Clothing-II. To attain this objective, we have added this course to the diploma level which consists Cloth making process containing pattern making, pattern grading, marker making, CAD & CAM, fabric inspection, fabric relaxation, fabric spreading, and fabric cutting process. By acquiring that knowledge, skills and attitude students will be able to gather clothing technology as well as able to study in further courses.

This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.

The Ready-Made Garment sector plays a very significant role in the GDP of Bangladesh. For the smooth running of this sector diploma textile engineers are required in the mid-level who are playing key roles in this sector. To prepare an appropriate diploma graduate should have sufficient knowledge in Garment Manufacturing-III. To attain this objective, we have added this course to the diploma level which consists of garment manufacturing process containing pattern making, pattern grading, marker making, CAD & CAM, fabric inspection, fabric relaxation, fabric spreading, and fabric cutting process. By acquiring that knowledge, skills and attitude students will be able to gather garment manufacturing technology as well as able to study in further courses.

This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.

Many textile and fashion designers modernly use specialized forms of technology such as computer-aided design (CAD) and computer-aided manufacture (CAM) to speed up the production process, reduce waste, and reduce labor costs overall. Textile manufacturers use CAM to make printed textiles and whole garments. The CAD information is sent to the CAM, which controls and manages the manufacturing process. Often CAM systems involve the use of CNC, or computer-numerical control machines, that control processes like cutting and joining garment segments. This subject objective is to know about CAD & CAM.

This course is conducted by:
Rifah Nanziba
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute.

CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.

CONDUCTED BY:
Md. Obydullah Al Masum
Instructor
Department of Textile Engineering
Daffodil Polytechnic Institute & BTEB Dhaka.